mi used for sale

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m No. 4614 Mikron WF 31 SA Universal tool milling machine Working area: 560 x 500 x 400 Control: Heidenhain TNC 114 - active digital display Rigid angular table Spindle holder SK 40 Coolant device Speed range 40 - 4000 rpm Weight approx. 2450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

plate thickness: 3 mm pressure: ? t total power requirement: 3,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 0,9 x 1,1 m No. 3549 Notching machine BOSCHERT K 30 / 120 MINI No. 1 Working area: Table 800 x 450 Drive: 3,5 Foot switch Table 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°) Space requirement approx. 1300 x 900 x 1100 mm Weight approx. 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used automatic butter packing machine MILCOM PA1. Technical parameters: capacity 60-110 pcs/min packaging format 200g cube dimensions 100x75x29mm centering unit – photocell stainless steel butter tank, with stainless steel screw and plastic cover electric board on the machine SIEMENS PLC electronic unit with visualization frequency converter for continuous speed control

easy pocket table roller Stainless steel Easy manual roll-out Roller adjustment 0.5 to 25 mm Manual operation

Key data: 700 mm, 420 mm, 380 mm

General Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2016 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation

Dissolver Agitator Geppert Mixing Technology SV 30 Power 0.55 kW Speed range 350-1500 1/min Switchboard with integrated FU mobile, mobile on castors Very good condition, straight from production

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,22,22,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

D+L Shielded Gas Welding System MIG 314 300 A 400 V toothed 4-roller wire feeder 14 Levels Burner package 4 m mobile Weight approx. 86 kg

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

Grinding wheels are available, they are still unused and originally packaged in a box. 1x Elbe abrasive media (MICROREX) Shape: 01 Straight Disc 104228/1 400,00x200,00x203,20 58AY 80/2 KL 8 V for: 35 m/s forcibly guided; 30 m/s walk-behind 3x Elbe abrasives (MICROREX) Shape: 01 Straight Disc 104228/2 400,00x140,00x203,20 58AY 80/2KL 8V for: 35 m/s forcibly guided; 30 m/s walk-behind 1x Control disc 140mm. Comet (Elbe) S33728 Shape:01 Straight Disc 250,00x140,00x127,00 A120 R13 8-974-51/18 1x Regulating disc 200mm. Comet (Elbe) S32848 Shape: 01 Straight Disc 250,00x200,00x127,00 A120 R13 6-055-24/18 1x WISSCO dressing tile AP23NAD 1x Lifting crane for grinding media

max. wheel diameter: 120 mm gear width: 130 mm max. module: 2 no. of teeth to be hobbed: 6-325 Z min/max. spiral pitch: 20-5000 mm hobbing length: 130 mm weight of the machine ca.: 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Technical Data Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030/800/1520 mm Weight of the machine: 880 kg Colour of the machine: black The data for this ad was created with ModulMWS - the softwa ...

MITROPOWER Diesel Generator PM13TA1-3 Rated power 11 kVA Max. power 12 kVA Mains voltage 400/230 V Rated current 15.8 A / 27.6 A Fuel tank capacity 25 L Water-cooled Noise level 72 dB (A) Weight approx. 331 kg LxWxH 1240x700x950 mm

MITROPOWER Diesel Generator PM 7500 TD Max. power 6.5 kVA Diesel engine 500 cc, 4-stroke, 1-cyl., direct injection Mains voltage 230 V Fuel tank capacity 14.5 L Electr. Constant voltage regulation Dimensions (LxWxH) 955 x 525 x 680 mm Weight 170 kg

x-travel: 1000 mm y-travel: 750 mm z-travel: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain TNC426 30-fold tool changer electronical handwheel chip screw coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 750 mm Verfahrweg Z / Z-Travel 750 mm Tischgröße / table size 1150x700 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 30 Gewicht der Maschine ca. / weight ca. 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 53 mm gear width: 25 mm max. module: 3 min. module: 0,1 total power requirement: 0,8 kW weight of the machine ca.: 0,21 t dimensions of the machine ca.: 600x460x1200 mm Resharpening machine MIKRON 121 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: approx. 8,000 - 10,000 ltr./h including Siemens S5 PLC Top condition

Wallace Micro Indentation Tester

CNC Portal Flame Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Make: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transmission Parameter database iMSNC control / Windows® "AsperWin-Basic" programming system, for programming directly on the machine control system Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for graining) via plasma source Module "THC" / Automati ...

We have MIWE roll-in stoves for sale Price 2 000euro

Key data: 600 mm, 450 mm, 450 mm

achine details Stock-No. 1105-04026 Type of machine Machining Center - Universal Make MIKRON AGIE CHARMILLES Type UCP 600 Vario Year of manufacture 2006 Type of control CNC Storage location LAGER Country of origin Switzerland Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 600 mm Y-Travel 450 mm Z-Travel 450 mm control iTNC 530 Heidenhain Turning Speed Range - Main Spindle max. 24,000 min/-1 Power capacity - main spindle 30 kW max. torque 91 Nm tool taper HSK-A63 surface area Ø 156 mm swivellable B: -101 / +45 ° rotatable C: 360° Table Speed 200 min/-1 max. workpiece sizes Ø 350 x 450 mm max. workpiece weight 80.0 kg numbers of pallets 10 number of toolpositions 30 pos. Max. mould width 80 / (125) mm max. tool length 200 mm Change time < 3.0 sec max. tool weight 6 kg max. total weight 80 kg Rapid Traverse 22 m/min ...

surface area: 1200 x 600 ( x 500 ) mm no. of flutes: 9 groove width: 14 / x 62,5 mm total power requirement: 0 kW weight of the machine ca.: ? t Packing: Holzkiste 1400850700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 805 405 (x 340 ) mm no. of flutes: 8 groove width: 12 / x 45 mm total power requirement: 0 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used All-Purpose Oven Stone Slabs Oven Electric by Miwe Model Condo CO 4.1208 from 2018 tested and cleaned in stock immediately available for sale. The stove is with 4 floors each 120x80cm with exhaust hood including fan. - 4 shelves each 120x80cm - Each floor can be controlled separately - Top and bottom heat can be controlled separately - With exhaust hood - Floor entrance height 3 pieces 17cm and one shelf 20cm - Connected load: 28.7 kW - Year of construction 2018 Dimensions Width: 150cm Depth without hood: 133cm, with hood 173cm Height without hood: 194cm, with hood 213cm

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

for 180 lit , with lifter

table diameter: 650 mm table load: 600 Kg swivelling range: 90 Grad turning speeds: 0,2 - 3,0 U/min total power requirement: 0,55 + 0,4 kW weight of the machine ca.: 0,28 t Welding rotary tilting table - Remote control - 2 x welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

vailable Harmonisation machine for grinding unbalanced PCR_Tyres Description attached! CE-certified

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,22,22,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel trolley / freezer trolley for trays 600 x 400 with 20 trays 4 swivel castors Dimensions: 470 x 600 x 1800 mm, WxDxH NEW Many more in stock!

Stainless steel trolley / freezer trolley for trays 60x80 or 2 x 60x40 with 15 trays 4 swivel castors Dimensions: 660 x 810 x 1800 mm, WxDxH NEW Many more in stock!

Freezer trolley for sheet metal 600x400 Stainless steel 4 swivel castors/wheels Dimensions: W 460 x D 600 x H 1850 mm 16 floors Occasion Many more stainless steel appliances in stock!

WITH BASE CABINET Ser. No.: 12075 Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Adhesive: Planamelt R 1323-2

surface area: 800 x 425 mm no. of flutes: 6 groove width: 14 mm table length: 800 mm table width: 425 mm table load: 0,3 t total power requirement: kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 0,80,60,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used rack oven Miwe Rollin RI 1.0608 TL for a rack trolley with exhaust hood and ramp for sale. -Rack oven Miwe Rollin -Model RI 1.0608 TL - for 60x80cm trays -with oil burner -Built in 2007 and 2009 -400/230V 3/N/PE -50 Hz -Door hinge on the right -with exhaust hood -with drive-on ramp - 2 pieces available in stock

Bakery oven With three floors and a stand Manufacturer: Miwe Model: CO 3 External dimensions: 150x130x140cm Internal dimensions: 120x80cm Capacity: 3x4 trays (60x40cm)

Bakery oven With stand Manufacturer: Miwe Model: Econo EC 6 Dimensions: 90x85/125x210cm Capacity: 6 trays (60x40cm) Electric power: 9.5kW

Manufacturer: Miwe Model: RI/FO 60/60 Dimensions: 135x195x255mm Electric power: 52.6kW 400V 50Hz

Table dimensions: 0/ mm Motor output: 0/ kW Spindle diameter: mm reus: U/min Weight: kg Year: Control: Haidenhain TNC 355 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

surface area: 700 250 mm no. of flutes: 5 groove width: 12 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 700250320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions

Number of sanding units: 1 st. sanding width: 150 mm Sanding height max.: 150 mm Loewer edge finishing machine MiniSpin N Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush

For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2

: - Working width: - mm : - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Dürr / Ecoclean Minio 85C Year of construction 2003 The machine is used by us in 1 shift. Washing baskets: L x W x H 36 cm x 21 cm x 20 cm The dimensions of the system are L x W x H 2m x 1m x 2.65m The empty weight of the system is approx. 2,000kg. Location of the machines: 74219 Möckmühl The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.