mi used for sale

vailable Harmonisation machine for grinding unbalanced PCR_Tyres Description attached! CE-certified

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

surface area: 800 x 425 mm no. of flutes: 6 groove width: 14 mm table length: 800 mm table width: 425 mm table load: 0,3 t total power requirement: kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 0,80,60,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bakery oven With three floors and a stand Manufacturer: Miwe Model: CO 3 External dimensions: 150x130x140cm Internal dimensions: 120x80cm Capacity: 3x4 trays (60x40cm)

used rack oven Miwe Rollin RI 1.0608 TL for a rack trolley with exhaust hood and ramp for sale. -Rack oven Miwe Rollin -Model RI 1.0608 TL - for 60x80cm trays -with oil burner -Built in 2007 and 2009 -400/230V 3/N/PE -50 Hz -Door hinge on the right -with exhaust hood -with drive-on ramp - 2 pieces available in stock

Bakery oven With stand Manufacturer: Miwe Model: Econo EC 6 Dimensions: 90x85/125x210cm Capacity: 6 trays (60x40cm) Electric power: 9.5kW

Manufacturer: Miwe Model: RI/FO 60/60 Dimensions: 135x195x255mm Electric power: 52.6kW 400V 50Hz

surface area: 700 250 mm no. of flutes: 5 groove width: 12 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 700250320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions

Number of sanding units: 1 st. sanding width: 150 mm Sanding height max.: 150 mm Loewer edge finishing machine MiniSpin N ------------------------- Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush

: - Working width: - mm : - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MINARIK DRIVES MM23001C speedcontrol

An Aurora single-head pulverising mill, American made, offered as a complete powder-making line in excellent working order with its full dust extraction system. Pulverisers grind plastic pellets into a fine, free-flowing powder for rotational moulding and other polymer powder applications. The line includes the disc mill with feed hopper and vibratory feeder, an Eriez magnetic separator on the infeed, pneumatic transfer, cyclone and rotary valve discharge, Allen-Bradley PanelView controls with a full control cabinet, an access platform with handrails, and a jib crane with electric chain hoist (SWL 250kg) for disc changes. The dust extraction has external filter units with explosion relief venting in an ATEX-zoned installation, with full ducting and interconnecting pipework. Viewing is by appointment. Price on request.

bizhub PRESS C1060 = Equipment No: 1817933817 – Digital Printing Machine Incl. DF-626 Original Feeder, PF-707 Paper Cassettes, SD-506 Finisher, PB-503 Perfect Binder, IC-308 ext. EFI Controller incl. VI-507 Interface kit, RU-509 Connection Unit

bizhub C3350 = Equipment No: 1818829867 – Color MFP Incl. PF-P13 second paper cassette, FK-512 fax module

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 75 kg Dimensions (LxWxH): 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

Manuelle Winkelverpackungsmaschiene / Semi-Automatic Foil sealing machine ROBOPAC Micra M Year 2002 - Serial-No. 21037 Produktabmessungen / Product sizes Abmessungen der Schweißleisten (LxB) 540x390mm Produktionsleistung 300Produkte/Std. / Production 300pcs/h Elektrischer Anschluss / Power supply: 230V 1Ph 50/60Hz(V) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Continous Form Collator Micro Pack S 50 Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Miele G 7893 Professional Laboratory Dishwasher Washer & Disinfector with Hot Air Instruction manual available Water connection 1x cold water (KW) 1x hot water (AW) 1x AD Water (OD) Water drainage 1 drain hose Power supply: 3N AC 400V 50Hz Power consumption [kW]: 9.7 External dimensions H/W/D [mm]: 850 (820)/600/600 Net weight [kg]: 72

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

Key data: 65 mm, 510 mm

12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control

Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €

Multi-storey oven Miwe Condo CO 2.0604 Multi-storey oven Miwe Condo CO 2.0604 Year: 2011 - 2 shelves each 60x40cm - Each floor with separate Miwe FP control - Each floor with separate steam function - Top and bottom heat can be controlled separately - with program memory - Up to 5 baking sections can be set in the program - with proofer - with clipboard - With exhaust hood including fan - Shelf height 17cm - Power connection CEE plug 16 A - approx. 9.5 kW - With fixed water connection - Year of construction 2007 - Outer width: 90cm - Depth: approx. 100cm - Height with hood: 214cm

wire EDM machine, year 2006. Used machine. More info & price on IndustrialBuyer.

wire EDM machine, year 2018. Used machine. More info & price on IndustrialBuyer.

MIIC SRMIII-15R CNC Mandrel Bending Machine BIA45 Pipe Bending Machine Robot Bending Head 1500mm Collet Head Vibratory Conveyor Conveyor Belt For sale is a CNC mandrel bending machine / automated tube bending machine MIIC SRMIII-15R, plant designation BIA45. The system is designed as a complete automated bending cell. Workpiece transport and positioning are carried out via a rotatable and movable collet head. The travel distance in the X direction is approx. 1,500 mm. The actual tube processing is carried out by a robotic bending head. For the automatic feeding of small parts, the system has a vibratory conveyor pot with separation and part chute. In addition, a belt conveyor belt is integrated into the system. The entire processing area is secured by a safety fence system. In addition, safety light barriers are available. The electrical control and power technol ...

This MIKRON BTM 2000 surface grinding machine was manufactured in 1994. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1,000 mm. The machine has a maximum table load of 3,500 kg and a spindle speed of up to 4,000 rpm. If you are looking to get high-quality surface grinding capabilities, consider the MIKRON BTM 2000 machine we have for sale. Contact us for further details.

This 3-axis Mitutoyo Crysta-Plus M7106 was manufactured in 2017. It features a measuring range of 700 x 1,000 x 600 mm and is in near-mint condition with very low operating hours. The machine includes a Renishaw probe head and is regularly serviced. If you are looking to get high-quality 3D measurement capabilities, consider the Mitutoyo Crysta-Plus M7106 gantry robot we have for sale. Contact us for further details.

Machine Type: Side Loader Manufacturer: MIC Type: WRL 14 Year of Make: 2000 UVV test / expired Condition: used / functional, drive is loud but has full power. BATTERY FROM 2018 / Regenerated by Hoppecke Batteries 09/2022 Offer will only be sent if a complete imprint is provided! Price 2,950 Euro incl. 19% VAT freely loaded from warehouse Warstein. Location Warstein , Germany Reference number M-MIC-1026 DESCRIPTION We offer you a used sideloader from the manufacturer MIC incl. charger. Operating hours approx. 23500h Lifting height 6600mm Load capacity 1400kg Weight incl. battery approx. 4t Incl. charger Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your complete contact details ...

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

feed pressure: 8 bar Effective free air delivery: 130 l/min L/min Receiver capacity: 6 l / bar weight of the machine ca.: 15 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: mm Low-noise compressor with 78dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.