mi used for sale

Takeuchi TB 230 Year of construction 2017 Operating hours 980 Powertilt with load hook and hydraulic Lehnhoff HS03 quick coupler 1 digging bucket 300 mm

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Mixing Grinder 114 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 145 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after the advanced payment machine is ready for delivery

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Micro feeders in good condition, Agitator, gear motor, 0.12kw - 10rpm, Thread ø 60, slope 45, core ø 17 Painted steel, buffer tank with full detector Dosing capacity at 50 Hz approx. 70 l/h

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

Debotec A-50 mixer Serial: 1215 Stainless 50Kg mixer, tipping bowl to discharge,

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

Laboratory mill: Coarse grist mill MIAG from HINZ, Braunschweig Adjustable conical grinder ø 60 mm Drive 0,22kW - 1300 1/min, hinged for quick cleaning, with outlet tank Very solid, older model, can be used immediately

MIG/MAG hose package -Length: 3 m -Euro plug -Water cooled -with integrated suction hose -Number: 2x hose packages available -Price: per piece -Weight: 3 kg

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Outside micrometers, micrometer screws, outside micrometers -Manufacturer: Mitutoyo, outside micrometer -Measuring range: 50-75 mm mm -Reading: 0.01 mm -Locking device -Other sizes: also available -Dimension box: 250/145/H35 mm -Weight: 0,7 kg

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Gear milling machine Micron 106 16 A 380 V

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Meat grinder with mixer Manufacturer: Sind Model: S32A Dimensions: 800x700x1200 mm Electrical power: 3kW + 1.1kW Capacity: 800 - 1.000kg/h

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Used stainless steel ribbon mixer, volume 180 liters. Ready for operation.

x-travel: 900 mm y-travel: 630 mm z-travel: 500 mm table-size: 1200 x 600 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 2 - 4000 mm/min rapid motion -longitudinal/cross/vertical: 10/10/8 m/min numbers of positions in the tool changer: 22 quill stroke: 100 mm total power requirement: 20 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: 4 x 3 x 2,4 m electronic hand wheel: cooling equipment: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

WE OFFER AN BRAND NEW MACHINE, MACHINE WAS NEWR USED FOR WORK ATTACHED PHOTOS MACHINE IS AWAILIBLE IMEDIATELY

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Pharma Mixer Granulator Manufacturer: Diosna Machine Type: P 100 Bj. 1994 Gross capacity 122 l, net capacity approx. 37 - 100 l Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-bladed, one-piece, drive with air gap seal Double-jacketed container for heating/cooling (without own heating/cooling unit) Probe Product Temperature Blind flange for retrofitting a DIOSNA mixing probe Sealable opening in the container lid for adding mixing components Nozzles for fluid addition Screw cap with degassing/vent filter Pneumatic spout, swivel for cleaning HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurized enclosure Protection class E Ex p (T4), Fabr. Gönnheimer, type F 800, control unit FS 821, control panel BT 81 4.1 Separate control cabinet (no Ex) with PLC Siemens S5-115U Drive 400/230/ ...

Mixer for granules and powdered products Mixomat. Completely in stainless steel. Mixing tanks on load cells. Tegiloxane pump. Vacuum pump AZO 5.5 kW. Granulate gate valve NW 100.

Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.

All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm