mi used for sale

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Wire EDM Machine Manufacturer: Mitsubishi Electric Type: MV1200S NewGen Year of Make: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric Control Hybrid construction Travel: X/Y/Z: 400 x 300 x 220 mm Travel paths U V: 120 x 120 mm Workpiece dimensions max.: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS-Optical Drive System Tubular Direct Drives in XY Axes Linear scales in XY axes Intelligent AT – Automatic Wire Threading For wire diameters 0.10 – 0.3 mm Automatic fine hole search function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS-Long Life System 10 kg wire station Wire alignment block Wire Chopper Compressor Cooler

Martin FFG 924 Midline – Flexo Folder Gluer Line Reference ID: PP-53017 Category: Flexo Printer Manufacturer: Martin Model: FFG 924 Midline Year Built: 1989 Colors: 4 Condition: Good Location: Europe Availability: Immediately Technical Specifications Maximum size: 920 × 2400 mm Minimum size: 255 × 480 mm Speed: up to 18,000 sheets/hour Configuration Prefeeder: Martin (Year 2000) 4 Flexo printing units (Rapiset system) Slotter unit Rotary die-cutter Folder-gluer section Glue monitoring system: Valco GlueChek (Year 2016) Machine control upgrade: 2018 Strapping machine: Cyklop Inline 1200 (Year 1998) Palletizing system: MuK robotic palletizing system (Year 1998)

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Dough kneading machine Model: SP 10 Protective cover with shutdown Table machine for max. 6 kg. flour Spiral kneader for max. 10 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 230V, 400 watts, 2 amp. Weight 35 Kg. Dimensions: 300 x 510 x 450 mm, WxDxH Dough machine NEW with 12 months warranty Come to our sales shop !

Dough kneading machine Model: SP 15 Protective cover with shutdown Table machine for max. 8 kg. flour Spiral kneader for max. 15 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 230V, 550 W, 2.5 Amp Weight 40 kg Dimensions: 340 x 550 x 450 mm, WxDxH Dough machine NEW with 12 months warranty Visit our great sales shop!

Dough kneading machine Model: SP 20 Protective cover with shutdown Table machine for max. 12 kg. flour Spiral kneader for max. 20 kg. dough Speed infinitely adjustable with timer DGUV V3 tested Connection 230V, 1100 W, 5 Amp Weight 50 kg Dimensions: 400 x 630 x 550 mm, WxDxH Dough machine NEW with 12 months warranty Come to our sales shop!

Accessories: • Machine is already dismantled and stored • Duplex unit • Discharge unit • 13 GB RAM/HDD • Paper cassette (1 x 1,000 sheets) • Starter and drum • MB-511 Manual Banner Feeder • MK-760 Banner Feeder Kit for MB-511 • PF-812 Large Capacity Magazine for Long Formats • FS-532m Staple Finisher with Autom. Staple trimming • MK-761 Banner Output Tray for FS-541/OT-512 • MK-732 Mounting Kit for PI-502 • PI-502 (2 compartment attachment unit) for FS-541/532 • RU-518m cooling/smoothing unit with output function • IC-609 Konica Minolta Embedded Controller C4070/C4080 • UK-220 APPE Kit for IC-609 • IQ-501 Integrated Color Care Unit • Patlite/External light for system status 4-colour • VI-514 interface for IQ-501 • AccurioPro Flux Essentail • Flux Preflight Pro • AccurioPro Flux Multi Seat Year of construction: 2024 A ...

Rated current (A): 1000, Poles: 3; Gross weight [kg]: 41; Accessories: Multiple breakers in stock!, NEW/UNUSED

Rated current (A): 3200, Poles: 4; Gross weight [kg]: 75; Accessories: Multiple breakers in stock!, NEW/UNUSED

Rated current (A): 4000, Poles: 4; Gross weight [kg]: 99; Accessories: Multiple breakers in stock!, NEW/UNUSED

Rated current (A): 1250, Poles: 3; Gross weight [kg]: 41; Accessories: Multiple breakers in stock!, NEW/UNUSED

Rated current (A): 2500, Poles: 3; Gross weight [kg]: 61; Accessories: Multiple breakers in stock!, NEW/UNUSED

Engine Brand: MITSUBISHI, Conditie: NEW, Engine Color: Grey , Engine Condition: New , Starter Voltage: 24 Volt , Rated Power: 473 Kw, Rated Speed: 1500 Rpm, , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s6a3-ptaa-new/6 15, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.250 kg, Type number: S6A3-PTAA

Engine Brand: MITSUBISHI, Conditie: CORE, Engine Color: Black , Engine Condition: Core , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s3-l2-core-engi ne-for-parts/17907, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: S3 L2

Engine Brand: MITSUBISHI, Conditie: CORE, Engine Color: Black , Engine Condition: Core , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s4l-d-f-core-en gine/17905, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: S4L D-F

Engine Brand: MITSUBISHI, Conditie: CORE, Engine Condition: Core , Turbo Type: None Mounted , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-6db10-core-engi ne-for-parts/17886, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 6DB10

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Used from plant disassembly. Siemens Simodrive Posmo-SI with Alpha gearbox Engine: 6SN2500-2BF00-0GG0 Transmission: TP 050-MF1-5 -071-000 Dimensions L x W): approx. 65 x 25 cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.

Shop oven Miwe Aero 4.0604 closet Miwe Aero AE 4.0604 shop oven with proofing cabinet, digital control Miwe Aero shop oven is characterized by outstanding baking result and high functionality.Sheet metal inserts are easily removable for cleaning even superficially, the Miwe Aero is very easy to maintain and clean. Easy operation by Miwe FP control with up to 30 baking programs.Integrated swath apparatus with clock and full swath program for fast and rich swaths.The viewing windows are with cool double glazing and bright lighting for the baking chamber. Miwe aero shop oven Type: AE 4 0604 digital Miwe FP control for 4 sheets 60x40cm with closet with swath destroyer Year of construction 2005 specifications: 400V / 230V / 50Hz 8.5 kW Dimensions with hood: Height: 178cm Width :90cm Depth: 100cm

Swimming / sinking system, swimming / sink container with discharge belt, washing bath, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: NUNBERGER conveyor systems Type KB 600 Filling height approx. 2 m Bathroom approx. 4 x 2.4 x 1.6 m Chain tape for discharge of sinking materials Bandwidth approx. 600 mm Belt drive with gear motor 1.5 kW (dismantled due to transport height) Total dimensions: approx. 5.5 x 2.4 x 3.1 m The plant was used in fruit and vegetable production. It is also possible to use plastic to clean. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

We offer you here a used pallet rack stand of the Manufacturer's Mic Spica for purchase. Technical data on the pallet rack: Shelving system: Mic Spica The scope of delivery includes: 01x pallet rack, used Material colour: cream white Frame profile: 80 x 70 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 2,780 mm high 1,000 mm deep

MiniFeed Grid is a standardized automation solution for small and medium-sized series. The cell is equipped with various grid systems, so it can handle both blanks and wave material. The system is extremely compact, flexible and designed to operate a wide variety of machine types. The system is based on a transportable, stable steel frame in which everything is integrated and assembled. Since we deliver the robot cell to you completely finished, installation and commissioning is quick and smooth. Once commissioned, the system requires minimal maintenance. At a glance: - Small series - Medium series - Component weight up to 30 kg - Easy to use - Handles various objects -Compact -Turn -Mill - Gripping pressure -Remote maintenance The advantages: - Standard equipment = short delivery times - Fully tested module = Quick installation - Robot 12 kg, 25 kg or 20 kg ...

MiniFeeder Belt is a standardized automation solution for small and medium-sized series. Using lanes for handling without a device, the operator places blanks on the upper infeed conveyor, finished parts are discharged on the lower outfeed conveyor. The entire system is based on a transportable, stable steel frame in which everything is integrated and assembled. Since we deliver the robot cell to you completely finished, installation and commissioning is quick and smooth. Once commissioned, the system requires minimal maintenance. At a glance: - Small series - Medium series - Component weight up to 30 kg - Easy to use - Handles various objects -Compact -Turn -Mill - Gripping pressure -Remote maintenance The advantages: - Standard equipment = short delivery times - Fully tested module = Quick installation - Robot 12 kg, 25 kg or 20 kg (cobot) integrated in th ...

Artech HD granulator SG 80 120 with 200 kW. Well suited for EBS, cables, used tires, plastics, AzV. Well maintained machine. Recently overhauled.

Walzenstuhl Kaffee Mühle Bühler-Miag MDWA-25/10A - used - For grinding cereals and similar raw materials. The Wahlzenstuhl was previously used for grinding coffee beans. Manufacturer: Bühler-Miag Type: MDWA-25/10A Masch-Nr.: 1291 Year: 1977 Opening top approx. 960 x 395 mm with perforated sheets Roll diameter 250 mm Roll length 1000 mm Manual indentation and disengagement Drive motor Bauknecht 7.5 kW Operating instructions/documentation for the machine available. Total approx. 2200 x 1600 x 1450 mm Weight according to instructions approx. 3100 kg Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Working widths: 2000 mm roll surface width: 2200 mm Fabric content: 48 Meter 0: 160 mm Roller covering: ALU Clouth speed: 20 - 200 m/min Cloth tension: 20 - 500 N voltage: 400 V / 50 Hz output: kw weight: t dimensions of the machine ca.: m cloth accumulator: 48 meters capacity Number of rolls: 15-axis guide rolls, Ø 160 mm made of aluminum type of material: double polyamide foil hose material thickness: 2 x 15 my to 2 x 50 my movable roller mill is moved up and down with 4 ball screws unit was disassembled after test run for transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mm round steel bars: 30 mm U-iron on the x-axis: 60 x 40 x 6 mm roll diameter - bore: 40 mm roll diameter -toolpieces: 118 - 148 mm turning speeds: 9,3 U/min voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,425 t dimensions of the machine ca.: 1,5 x 0,8 x 0,8 m • Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5. further roller sets optionally: for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4, Surcharge for each extra roller set: € 440,-/set Machine in unused condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 520 mm height: 700 mm depth: 350 mm thickness of clamping plate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mm About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshop You want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 4400 mm profile spindle: 1 Stück main drive: 19,2 kW CNC machining center MASTERWOOD 4 WIN with automatic loading and unloading -------------------------------------------- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Various tool magazines for optimal tooling - Simultaneous feeding with up to 6 workpieces - patented clamping system for optimum machining of workpieces - CNC controlled work table with automatic positioning of the beams and Stretcher - Automatic reclamping for changing between external and internal profiling - INTEGRATED windowing software, i. Machine does not have to (but can Of course) be controlled from the office with external industry software. - powerful engine with 19.2 kW HSK-63 E - Loading and unloading conveyor Ask for a quote and see for yourself unbeatable value for money! VIDEO from the m ...

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 500 mm z-travel: 460 mm table surface area: 1000 x 500 mm spindle taper: SK 40 control: HEIDENHAIN TNC 150 spindle turning speed range: 31,5 - 3150 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid traverse longitudinal and cross: 6 m/min rapid traverse vertical: 4 m/min quill stroke: 110 mm distance spindle nose and table: max. 559 mm table load capacity: max. 500 kg total power requirement: 14 kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Microbrewery – Brewiks 500 L, 760 L/brew, 5,000 L/month – 2017 This is a complete two-vessel microbrewery, installed in 2017, equipped with all essential components for brewing, fermenting, and packaging beer in glass bottles. It is ideal for small- to medium-scale production. The main unit is a Brewiks 500 L two-vessel system, comprising two multifunctional tuns: • Mash Tun / Boiler / Pasteurizer • Lauter Tun / Sparging / Whirlpool Both vessels have been modified by Mithreum, including the addition of a manhole for easier spent grain removal. The Mash Tun / Boiler has a maximum capacity of 760 liters and can produce two brews in 8–11 hours, depending on the beer type. The current monthly capacity is approximately 5,000 liters, limited by fermenter volume. If higher output is needed, the Brewiks 500 system can be upgraded with a Brewiks PLUS module (an additional bo ...

number of driven axis: 1 guage width: 1435 mm pulling force - max.: 300 t motor: Deutz power fuel: Diesel weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Braumeister Micro Brewery System – 500 L The Braumeister is a fully automated brewing system designed for simplicity of operation, ease of cleaning, and reliable performance. It features a five-step automated control process that streamlines the brewing cycle and ensures consistent results. The 500-liter system is well suited for small commercial applications such as bars, cafés, and pilot breweries, as well as for highly experienced home brewers. The unit is supplied with integrated wheels and a hoist for ease of handling. It has a compact footprint, fully automated operation, and a jacketed vessel for efficient cooling. The system also includes a whirlpool function, making it a comprehensive solution for small-scale commercial brewing. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2016 Capacity approx. 500 l fin ...

working length: 6000 mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0550 mm : 410 mm : 480 mm : 650x410 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 500 mm z-travel: mm Control: Heidenhain tool taper: SK 40 : 13,5 kw turning speeds: 3150 U/min total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Features Volume 40000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7500 mm Height 5800 mm Diameter width 2800 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 central to DN 40 Threaded Socket DN 50 Fermentation valve DN 50 Check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50 and outlet pipe DN 50 with flange 4 calotte feet, heigh ...

aschinella details Warehouse number 1105-03380 Machine Type Machining Center - Vertical Sigma brand Type MISSION 2 Year of construction 2002 Control type CNC Control FANUC 18 M Storage location FRANCE Country of origin Italy Delivery time by arrangement Freight base from location Technical details x-path 750 mm y-way 400 mm z-displacement 450 mm Table clamping surface 900 X 400 mm table load 600 kg Tool holder SK-40 ( DIN 69871-A) Speed range 6000 rpm Spindle pitch 15 kW torque 191 Nm Spindle cooling with cooling agregat Tool magazine with TELLER MAGAZINE Places in the tool magazine 16 pieces( RANDOM) Suit bolts DIN 69872-A Control FANUC 18 M Information Accessories: NC STEUREUNG FANUC 18 M