mi used for sale

Miwe SK-II Econo steam condenser power: 0.2 kW; dimensions 90x125x19 cm; 2 pcs in stock; new

Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: Microdrive-3 UDZ-70 -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -A: 70 A -Dimensions: 440/145/H685 mm -Weight: 35 kg

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor -Motor power: 5.5 kW -Speed: 1435 rpm -Hydraulic pump -Max. Pressure: 60 bar -Liter output: 50 l/min -Dimensions: 720/640/H700 mm -Weight: 145 kg

In-store oven Quail Mini Thermic Plus 10 - Quail Mini Thermic Plus 10 hot air oven - Ovens 5+5 controllable - for 5 + 5 baking trays 60x40cm - Door stop on the right - elek. Power supply: 18.2 kW - with proofing cabinet - Control: Shopmatic 5 Plus Timer - 400 Volt AC /3Ph/N/PE/ 50Hz - Year of construction 10 / 2008

Fully automatic proofing machine Miwe GVA 22LDS -Fully automatic proofing machine in black by Miwe -Model GVA 22LDS -for 4 rack trolleys -Year of construction 2015 -400/230V 3/N//PE -without cooling compressor / compressor -Outer dimensions approx.: Width: 180cm Depth: 200cm Height: 265cm

-fully hermethic engine compressor -digital thermostat Cooling capacity: 1,0kW Voltage: 230V/50Hz Pump power: 0.15kW Water tank: 6l

Miller TR 104 2 colors with perfector. color Control panel(Pult), 75 mil, roller and cylinder are without damage

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph

Gear motor, electric motor -Speed: 23 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 500/150/H280 mm -Weight: 20 kg

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Make : Benhil Model : Microfix 8471 Capacity: 1400 kg/hr Block Loader : Pressure inserter Condition : Very Good Electricals : New Rewiring

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

Containers mit Zubehör für MWM Typ TCG 2020 V12 (bis 1,2Mwe) Es gibt eine vollständige Dokumentation. 2012 Jahr. Nach dem Entfernen des 2020V12-Motors. Es gibt einen Schornstein für das Set. Es gibt keinen Abwärmetauscher, externen Kühler, zwei Module in der Steuerung.

Centrifugal pump, water pump -Motor power: 1.5 kW -Speed: 2850 rpm -Conveying capacity: not visible -Pipe connection inlet: 90 mm -Pipe connection output: 79 mm -Dimensions: 360/240/H370 mm -Weight: 31 kg

feed pressure: 7 - 9 bar Effective free air delivery: 230/130 l/min L/min Receiver capacity: 10 l / bar weight of the machine ca.: 25 kg. Number of cylinders: 2 Stk. motor: 230V / 1,4KW V / KW range L-W-H: 600 x 310 x 510 mm Low-noise construction compressor 53 - 60dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used head machine KÖNIG, Type: Mini Rex Futura -Overhauled- - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - 2 rows - new tapes - new Teflon - Wear parts renewed (completion 15 January 2023) - 6 months warranty - Condition: Very good, ready for immediate use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Compulsory mixer, agitator, mixer, mixing tool -wherever electrical mixers are not permitted -Nominal consumption: watts -Speed: rpm -with: stirring stick -Number: 2x agitators available -Price: per piece -Dimensions: 470/330/H900 mm -Weight: 14 kg

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

Miwe proofing room GR -Miwe proofing room -Year of construction 2013 -15.58 kW -400/230V 3/N/PE 50Hz

In-store oven Miwe Aero 8.0604 with proofer - digital Miwe FP control - for 8 sheets 60x40cm - with proofer - for 16 sheets 40x60cm - Swath destroyer - 400/230V 3 / N / PE / 50 Hz - 15.4 kW - Year of construction 2005 -Electric Metrics: 90cm wide 100cm deep 215cm high

We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.

Gear motor, electric motor, electric gear motor -Speed: 22 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 35 mm -Protection class: -Quantity: 1x engine available -Dimensions: 620/212/H270mm -Weight: 44 kg

RECON Part Number: 37705-10300 & Part Number: 37705-10400 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package

Deck oven Miwe Condo CO 5.1208 Bakery oven Electric -5 floors each 120x80cm -each floor with Miwe FP control -each floor separately controllable -Top and bottom heat can be controlled separately -each floor with separate steam function -with proofing cabinet -with steam capacitor -with exhaust hood -Floor entrance height 17cm Internal height 16cm -Power: 49,1 kW -Year of construction 2010 -External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 25 l/min -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm -Weight: 248 kg

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

GM 1207 thermal oil plant consisting of: 4 wagon ovens 1 central heating system with gas burner Total baking area: 48 sqm Manufacturer: MIwe Year of construction: 2002 Condition: very good dismantled in stock Pratteln Specifications: 4 trolley ovens for 2 baking trolleys each with 10 supports Baking area per oven: 12 sqm Central heating system: Gas, 350 Kw 18 baking trolleys with 10 pads for: Baking trays: 600 mm x 1000 mm Footprint per furnace: W 1600 mm x D 3100 mm x H > 3000 mm Side by side: W 8000 mm x D 3100 mm x H 3000 mm

Tire with rim -Tire size: 16.00 R20 -Dimension: Ø 1320 mm -Weight: 246 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 60 bar -Liter output: 5.5 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 0.75 kW 1400 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Dimensions: 520/330/H600 mm -Weight: 100 kg

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Humidification and sprinkling • Brand: Minipan • Lattice inlet and outlet belt • Humidification: in the spray system • Sprinkling: with various grit • Band width: 650mm • Machine length: approx. 2500mm • Speed: adjustable • Condition: technically tested

Gebrauchter Ofen Miwe Aeromat von 1995 doppelt mit Gärschrank - effizient. H: 192 cm T: 95 cm B: 90 cm

Winyard Minifill MKIII depositor Serial: MNS1509146 Stainless depositor, Rotary cut off depositing head, adjustable fill size, low level on wheels, with foot pedal

Winyard Midifill MKII depositor Serial: MDS040740 Stainless depositor, Rotary cut off depositing head, adjustable fill size, with foot pedal low level on wheels