mi used for sale

Make:MITSUBISHI Type:TD13M-430RC Serial Number:A25665 Part Number:7689069 MFG Number:49182-05300

Reference number 20149 Brand MITSUBISHI Model S6A 2 MPTK Power 470 HP RPM 1940 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Panel Yes including 2 extra panels and 1 alarm panel Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 24 V Remarks Runnig video available on request DIMENSIONS LxWxH (cm) 178 x 80 x 1,70 Weight (kg) 2100 KG

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

20150 MITSUBISHI S6R2 - PTA 575 kW - 770 HP 1500 RPM Serial Number 82000 General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Flywheel housing Governor Exhaust system Turbo / Aspiration Cooling system Starter Remarks SAE 0 Eelectronic DRY Turbocharged WATER COOLED 24 V BRAND NEW FEATURES Raw water pump DIMENSIONS LxWxH (cm) Weight (kg) 1690 mm x 1077mm x 1578 mm APPROX 2800 KG

The Screen Drum ASCO SD MINI is a foldable, semi-mobile unit designed for efficient screening in recycling, construction, agriculture, and gardening. As the MINI version of the SD COMPACT, it delivers flexibility and performance for handling various materials, including moist and sticky ones. Thanks to its vibration motor and robust design, it ensures smooth material processing whether fed manually, by excavator, or with a conveyor belt. Screened material is evenly discharged along the drum’s length, and larger pieces exit through a rear chute. The SD MINI offers stepless drum speed, reversible drum rotation, quick drum changes, multiple drum configurations, specific perforation solutions, a round drum with a cleaning brush, and an adjustable screen angle. Its variable height adjustment makes transport and operation easy, providing a powerful, user-friendly solution for diverse scr ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...

MITSUBISHIS12A2 MPTK940 HP1940 RPM RUNNER ENGINE EXCELLENT CONDITION AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Cooling system KEEL COOLING Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2,291 x 1,418 x 1,596 Weight (kg) 3,800 KG

The mobile spiral mixer: optimal mixing results even with very small quantities; max. 80 kg dough / 50 kg. flour; bowl, spiral and guard from stainless steel ; two speeds; wheat, mixed wheat, mixed rye, rye doughs; power: 2.6 / 3.2 kW / 380V

Martin FFG 924 Midline – Flexo Folder Gluer Line Reference ID: PP-53017 Category: Flexo Printer Manufacturer: Martin Model: FFG 924 Midline Year Built: 1989 Colors: 4 Condition: Good Location: Europe Availability: Immediately Technical Specifications Maximum size: 920 × 2400 mm Minimum size: 255 × 480 mm Speed: up to 18,000 sheets/hour Configuration Prefeeder: Martin (Year 2000) 4 Flexo printing units (Rapiset system) Slotter unit Rotary die-cutter Folder-gluer section Glue monitoring system: Valco GlueChek (Year 2016) Machine control upgrade: 2018 Strapping machine: Cyklop Inline 1200 (Year 1998) Palletizing system: MuK robotic palletizing system (Year 1998)

STATIONary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Flow rate: 56 l/min. Drive speed: 1,475 RPM Drive power: 44 kW with SIEMENS 45 kW 3 motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm Weight: approx. 1.115kg Built: 1995 Condition: in good used condition.

- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°

Accessories: • Machine is already dismantled and stored • Duplex unit • Discharge unit • 13 GB RAM/HDD • Paper cassette (1 x 1,000 sheets) • Starter and drum • MB-511 Manual Banner Feeder • MK-760 Banner Feeder Kit for MB-511 • PF-812 Large Capacity Magazine for Long Formats • FS-532m Staple Finisher with Autom. Staple trimming • MK-761 Banner Output Tray for FS-541/OT-512 • MK-732 Mounting Kit for PI-502 • PI-502 (2 compartment attachment unit) for FS-541/532 • RU-518m cooling/smoothing unit with output function • IC-609 Konica Minolta Embedded Controller C4070/C4080 • UK-220 APPE Kit for IC-609 • IQ-501 Integrated Color Care Unit • Patlite/External light for system status 4-colour • VI-514 interface for IQ-501 • AccurioPro Flux Essentail • Flux Preflight Pro • AccurioPro Flux Multi Seat Year of construction: 2024 A ...

Engine Brand: MITSUBISHI, Conditie: NEW, Engine Color: Grey , Engine Condition: New , Starter Voltage: 24 Volt , Rated Power: 473 Kw, Rated Speed: 1500 Rpm, , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s6a3-ptaa-new/6 15, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.250 kg, Type number: S6A3-PTAA

Engine Brand: MITSUBISHI, Conditie: CORE, Engine Color: Black , Engine Condition: Core , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s3-l2-core-engi ne-for-parts/17907, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: S3 L2

Engine Brand: MITSUBISHI, Conditie: CORE, Engine Condition: Core , Turbo Type: None Mounted , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-6db10-core-engi ne-for-parts/17886, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 6DB10

For sale: Micro Motion Mass Flow Sensor CMF010P323NB Order number: 8000.2 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

Miwe Terminal Portrait Control Type: HF-CI metrics: 24.5cm Wide 195cm high

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

MiniFeed Grid is a standardized automation solution for small and medium-sized series. The cell is equipped with various grid systems, so it can handle both blanks and wave material. The system is extremely compact, flexible and designed to operate a wide variety of machine types. The system is based on a transportable, stable steel frame in which everything is integrated and assembled. Since we deliver the robot cell to you completely finished, installation and commissioning is quick and smooth. Once commissioned, the system requires minimal maintenance. At a glance: - Small series - Medium series - Component weight up to 30 kg - Easy to use - Handles various objects -Compact -Turn -Mill - Gripping pressure -Remote maintenance The advantages: - Standard equipment = short delivery times - Fully tested module = Quick installation - Robot 12 kg, 25 kg or 20 kg ...

MiniFeeder Belt is a standardized automation solution for small and medium-sized series. Using lanes for handling without a device, the operator places blanks on the upper infeed conveyor, finished parts are discharged on the lower outfeed conveyor. The entire system is based on a transportable, stable steel frame in which everything is integrated and assembled. Since we deliver the robot cell to you completely finished, installation and commissioning is quick and smooth. Once commissioned, the system requires minimal maintenance. At a glance: - Small series - Medium series - Component weight up to 30 kg - Easy to use - Handles various objects -Compact -Turn -Mill - Gripping pressure -Remote maintenance The advantages: - Standard equipment = short delivery times - Fully tested module = Quick installation - Robot 12 kg, 25 kg or 20 kg (cobot) integrated in th ...

Mixer Bär AR 40 MK1 40 l bowl– 1 pcs; beater 1 - pcs bowl ang spiral stainless steel; power: 1,1 kW

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.