mh 800 e used for sale

turning diameter: 250 mm turning length: mm control: Siemens 840D 0 total power requirement: 25 KVA kW weight of the machine ca.: 4 t required space: 5.5 x 2.5 x 2.5 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Plessey, hydraulic pump type A096X -Electric motor: EMI Type D 112/2R-6/8 24 Volt / 2 kW -Dimensions: 290/115/H130 mm -Weight: 10 kg

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA37 DR63M4/TF/IS -Speed: 13 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Protection class: IP55 -Dimensions: 340/180/H140 mm -Weight: 11 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type WA 30 DT71D4/IS -Speed: 29 rpm -Power: 0.37kw -Hollow shaft: Ø 20 x 100 mm -Protection class: IP54 -Number: 1x motor available -Dimensions: 340/145/H230 mm -Weight: 10.7 kg

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tray Sealer/Skin Packer Model: Erme TSK 410 incl. compressor + MAP-GasValve MAP-Traytool 2 x 225x175mmm incl. machines can be equipped with tools for skin-packs

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type W20 DR63M4/TF/IS -Speed: 28 rpm -Power: 0.18kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 300/180/H120 mm -Weight: 7.6 kg

Joint bearing -Inner diameter: 140 mm -Outer diameter: 230 mm -Brite outer ring: 80 mm -Width of inner ring: 130 mm -Grease groove -Weight: 18 kg -Number: several available

Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: efector, Inductive sensor proximity switch, unused, original packaging -Product Type: IIAE 2010 SFROG -Quantity: 1 sensor available -Cardboard dimensions: 135/65/H45 mm -Weight: 0.1 kg/carton

Tool holder, milling holder, milling tool, clip-on holder -Manufacturer: Loewe, milling chucks, MK5 mount -Type: 1/T ECMO -Size: 5 x 32 x 75 -Dimensions: Ø 60 x 276 mm -Weight: 3 kg

Applications: Testing of skin elasticity Endodermic massage Electroporation Ultraporation Ultrasound Micro-cleaning

Paper cutting machine Polar D 56 ECO Year of construction 2019 Kind. Model No. PS6297 (L920) Price: 15500 FCA

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Hoza EMU Punch This machine is ideal for punching out small moulded parts made of paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged knives or strip steel cuts can be inserted into the machine. Knife stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Colour: hammered blue Dimensions: 450 x 360 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Safety switch, safety switch, TZ -Manufacturer: Euchner, safety switch Safety Switch CES -Type: CES-A-AEA-04B -ID.Nr.: 072000 -Technical data: see photo type plate -Number: 1x available -Price per piece -Dimensions: 100/45/115 mm -Weight: 0.3 kg/pc.

Safety switch, safety switch, TZ -Manufacturer: Euchner, safety switch Safety Switch CES -Type: CES-A-AEA-02B -ID.Nr.: 072000 -Technical data: see photo type plate -Number: 2x available -Price per piece -Dimensions: 100/45/115 mm -Weight: 0.3 kg/pc.

Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW100-005 -Item no.: 826 269 1. -Power: R=100ohm P=500W -Dimensions: 255/160/H60 mm -Weight: 1.1 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, Tall: 1.900 mm, Weight: 6.420 kg

turning diameter over bed: ? mm turning diameter over slide rest: ? mm turning length: ? mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, Safety Switch (Original Packaging) -Type: TZ2LEO24M ID No.: 090559 Technical data: see photo of the nameplate -Cardboard dimensions: 190/120/70 mm Quantity: 1 piece available -Weight: 1.2 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg

Bottling line for breweries – capacity: 15,000 bottles per hour This bottling line was installed in 2015 by the German manufacturer Hormes as part of a complete brewery. The entire bottling line has been dismantled and is available. The production capacity is 15,000 bottles per hour, ideal for 0.33-liter non-returnable glass bottles. Components of the filling line: New glass lifters | Hormes • Pallet size: Suitable for new glass pallets measuring 1000 mm x 1200 mm • Drive: Electrically operated chain hoist for efficient lifting operations • Truss length: approx. 4,500 mm Fully Automatic Rinser | Hormes • Capacity: Up to 15,000 bottles per hour • Nozzles: At least 36 spray nozzles, matched to a specific bottle size • Cleaning: Cleaning the inside of the bottles with fresh water, spraying time approx. 1.5 sec., draining time approx. 5 sec. Automatic Bottle Fi ...

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 6x opto 22 480D45-12 / 1x electromatic RA4425-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 3950 -Voltage: 230V 11W -Quantity: 2x fans available -Price per piece -Dimensions: 90/90/H30 mm -Weight: 0.3 kg/pc.

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4650 N -Voltage: 230 V 8 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4656 N -Voltage: 230 V 19 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Container, granule container, storage tank, powder container, storage tank, color powder container -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg

Sensor-actuator distributor, distribution strip, distribution box, HV distributor, HV distributor -Manufacturer: Escherich, High Voltage Distributor -Type: 100082 (ES108) HVD-05 -Quantity: 2x distribution block available -Price per piece -Dimension: 130/120/H50 mm -Weight: 0.5 kg

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebm, axial fan type W2G144-AA21-01 -Voltage: 24 V 15W 3000RPM -Quantity: 1x fan available -Dimensions: 180/170/H50 mm -Weight: 0.8 kg

Line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Murr Elektronik, mains filter mains suppression filter 3-phase -Type: 10375 -Quantity: 1x filter available -Dimensions: 250/150/H65 mm -Weight: 3.4 kg

Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, Timetronic ECO JH charger -Type: D400 G 24/70 B-ETIS -Input voltage: 400V 50-60Hz -Power: 24V/70A -Dimensions: 500/500/H730 mm -Weight: 55 kg

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A  ...

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

Wire electrode, welding wire, welding wire -Manufacturer: Elga, protective gas wire electrode cored wire Elgacore DWA 50 Ø1.2 mm -Type: Elgacore DWA 50 Ø1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 5.1 kg

Linear drive, linear gearbox, lifting gear, spindle drive, linear unit, linear guide, linear axis, linear actuator -Manufacturer: Thomson, linear actuator Electrak E150 -Type: DF36-10W51-03L02MM -Dimension: 300/200/H110 mm -Weight: 2.2 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: Festo, input module -Type: CP-E16-M12X2 -Item no.: 18206 -Quantity: 1x modules available -Dimension: 145/80/H55 mm -Weight: 0.5 kg

- RC200 integrated - drive package multidynamic - 1 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg

- RC300 integrated - drive package multidynamic - 2 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

5-Farben Etikettendruck- und Endlosdruckmaschine - 5-Color Label- and Business Form Printing Machine Edelmann Junior Print DR2450 Baujahr / Year 1995 - Serial-No. 1.228/8 Size 8 1/3" Druckformat / Printing Size max. 207.5 x 360mm Geschwindigkeit / Speed max. 40.000rev/h Papierbreite / Paper width 150-370mm Rollendiameter / Reel diameter 1000mm Diameter Kern / Core 70mm Papiergrammatur / Paper weight 30-160gr7sqm Schnittlänge / Cutting length 423.3 or 211.6mm Rolle zu Bogen / Roll to Sheet Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test