mh 800 e used for sale

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: approx. 7 m -Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 3 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE140UK-2RS -Number: 3x spherical bearings available -Price: per piece -Weight: 13 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE160UK-2RS -Quantity: 1x spherical bearing available -Price: per piece -Weight: 19 kg

Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3-310 mm Motor output: 7,5 kW Number of knives: 4-TERSA St. Feed speed: 6-20 m/min. Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A ----------------------------------------------------- NEW MACHINE Partnership Edition Technical data / basic equipment: ----------------------------------------------------- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with  ...

Winch rope, crane rope, hoist rope, wire rope -Wire rope Ø 14 mm -Length: approx. 45 m -Material: Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 37 kg

Air filter -Type: SMF 30/50 -Diameter: Ø 81 mm -Dimensions: 780/140/140 mm -Weight: 2.3 kg

Pressure transducer -Type: PMP131-A3101A1X -U: 12...30 VDC -Weight 0.5 kg

Disc valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN50 -Material: Stainless steel -Weight 2 kg

ECONO PAK FA-KT and WVE-DR-R + 1-head folding carton display hotmelt (2 adhesive spots) + Angle Sealer + SIMATIC OP7 HMI + Nordson hotmelt 3400V-2GAV4D/R hot melt machine incl. hand glue gun + Handheld control unit + Videojet 2-line for coding + 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm + Built in 2003 + Good used condition WITHOUT checkweigher Folding carton conveyors

Toggle bolt, anchor hook -Type: EKD-HM4 -Quantity per package: 50 pieces -M4 threaded rod Price: per package -Number of packages: 12 -Weight: 1.2 kg/package

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

Hydraulic pressure switch -Type: EAXT518A-3 -Connection: 21-26 VDC -Price: per piece -Number: 8 available -Weight: 0.1 kg

MIG/MAG hose package -Length: 4 m -Tuchel connector: 3-pin -Gas: cooled -Weight: 4 kg

Frami Eco panel formwork 155m² The crane-independent and handy steel frame formwork for foundations, walls and columns. The lightweight Frami Eco formwork with a robust steel frame is ideal for fast and economical formwork with and without a crane. Frami Eco Framed formwork 155m² The crane-independent manhandled steel-framed formwork for foundations, walls and columns. The lightweight Frami eco formwork, with its sturdy steel frame, is ideal for fast and economical forming, with or without a crane.

Toggle bolt, anchor hook -Type: EKD-HM5 -Quantity per package: 25 pieces -M4 threaded rod Price: per package -Number of packages: 21 -Weight: 1 kg/package

Pressure reducer, pressure regulator -Type: 444.223 -Connection: 1/4 -Price per piece -Number: 8 available -Weight: 0.4 kg/piece

turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), driven tools 4000 rpm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Braking resistor, charging resistor, damping resistor, filter resistor, brake chopper -Manufacturer: SEW Eurodrive, braking resistor type BW068-004 -Item no .: 8216932 -Power: R = 68 Ohm P = 400 W -Number: 1x resistors available -Dimensions: 385/85 / H120 mm -Weight: 1.9 kg

Key data: 714 KW, 400 V

CHP natural gas, 2 units Onsite Energy ME3042L3 YOM 2009, Engine: MTU E3042L9, YOM 2016, 23,000h operating hours, Alternator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorption Chiller: Carrier 16LJ-A24E 689KW Cooling Capacity, YOM 2016, Emergency Cooler : Güntner GFH 090.2B/2x2-M 12m chimney, silencers, pumps, actuators, dampers, valves, gas control unite Superior control: synchronization, load management, island operation, grid support; ec Power cabinets, gas control valves, 714KWe, termal 1058KW, 698KW cooling capacity

Forklift battery charger, industrial charger, forklift battery charger -24 volts -Power: 63 A -Connection: 220 volts

coolant capacity: 50-250 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380 V / 50 Hz motor speed: 950 U/min Motor Capacity: 4 kW weight: 420 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

Key data: 90 mm

A first-class extrusion recycling brand EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg

Various work tables in different designs made of stainless steel

Key data: 90 mm

EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 460 volts, 60 hertz (US standard), available immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 2,4 x 2,8 m Brand DMG Mori Seiki Machine no F666 Type DMC 635 V Ecoline Control Siemens 840D Year of make 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle taper SK40 Speed maximum 12.000 RPM Chip transport Machine size 3.400 x 2.400 x 2.800 mm Machine weight 3.950 kg Tool magazine positions: 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, geared motor -Type: R40 DT71D4 -Speed: 32 rpm -Power: 0.37 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Dimensions: 405/146/H213 mm -Weight: 15.6 kg

amount: 2 STK weight - pallet system: 11 kg dimensions: 540 x 2000 x 100 mm Hobbing cutter possibly Pfauter P 400 - 2 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER

Control Fanuc 18iTB Main spindle passage 42 mm 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: 6-fold turret, IKZ, turret can be swivelled on both sides Rear horizontal slide x2 Two vertical slides X3 and X4 10 tool positions available Conveyor Bar Feeder SAMECA

1.Powder curing furnace 2,000 x 1,900 x 2,000mm, manufacturer Kigo O.E.! 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Inner dimension height 2,000 mm 4 Outer dimensions incl. thermoblock length 2,300 mm 5 Outer dimensions incl. thermoblock width 2,300 mm 6 Outer dimensions incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5005 9 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 10 floor stove gets 2 entry rails for tray wagons 11 Temperature 220°C 12 fans 1 pc. 6,000 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 wing doors on one side 2 pcs insulated with rock wool 150mm 70Kg/m² Heating Indirectly via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 heat-resistant fa ...

workpiece length: 400 mm work piece width: 400 mm workpiece height: 100 mm total power requirement: ? kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,70,71,6 m No. 5006 Filing machine ERHARDT + SPIESS / H&K Working area: Table 400 x 400 Drive: ? 2 hold-down devices File guide Adjustable stroke rate 75-300 min-1 Space requirement approx. 650 x 650 x (+500) x 1600 mm Weight approx. 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 550 KW, 11000 V

MAN E3262 LE202 gas generators Year of make 2015 50 Hz 550 Kw at 1500 RPM 4 units available 2 units with 0 hours and 2 units with very low working hours Auxiliary equipment also available

S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

Easiweigh Ace 2V Linear weigher Serial: 991278 Stainless, single head linear weigher, with foot pedal, 1Ph

CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Eurotherm, servomotor type ACM2n 0220-4/1-3 -Speed: 4000 rpm -Torque: 2.2 Nm -Shaft: Ø 14 x 30 mm -Protection class: IP54 -Dimensions: 200/88/H120 mm -Weight: 4.2 kg

Circulation pump, centrifugal pump, water pump, pump, heater -Manufacturer: Speck, circulation pump type EWN8/2-4 -Engine: Type EWN8/2-4 -Dimensions: 180/130/H180 mm -Weight: 3.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: SBA, transformer type ETK 168-0110 -Power: 1840/4340VA -Technical data: see type plate -Dimensions: 175/165/H150 mm -Weight: 20.3 kg

Perkin Elmer Heater with Quartz Cuvette for Perkin Elmer AAS Systems

Edeleanu GmbH / Shell 3. Sulphur Recovery (Claus-1) Year: 1956 Make: Edeleanu GmbH / Shell Conversion of the hydrogen sulfide produced in the 3 DIPA regenerators into elemental sulfur. (H2S recovery efficiency = 95.4%) Year of manufacture 1956 (1996 new furnace) Process Design by Shell, Claus Process Process Engineering by Edeleanu GmbH Operational operating throughput = 6 to 36 t/d H2S Operational operating temperature = 250 to 340°C Operational operating pressure = 0,3 bar 2022 – Decommissioning

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.

Edeleanu GmbH / Shell Fuel Gas Treater (HG Treater) (1978) Year: 1978 Make: Edeleanu GmbH / Shell Treatment of process gases (removal of H2S) by Diisopropanolamine (DIPA) washing. Year of manufacture 1978 Process Design by Shell Process Engineering by Edeleanu GmbH Throughput max. 180 t/d (DIPA-circulation max. 260 t/d) Operational operating temperature = 30 to 50°C (max. = 120°C) Operational operating pressure = 4,0 to 5,0 bar (max. = 12,5 bar) 2022 – Decommissioning

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg

Level indicator, sight glass, steel reflector, sight glass fitting, sight glass device -Manufacturer: Eriks, Econ Level Indicator -Type: FIG. 1590 -Test pressure: 3 bar -Number: 2x level indicators available -Price: per piece -Dimensions: 100/60/H3050 mm -Weight: 25 kg/pc.

For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...