mh 800 e used for sale

Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: 445/230/H200 mm -Weight: 23 kg

wire electrode, welding wire, welding wire -Metal powder: - Cored wire -Net weight: 15 kg -Number: 28x packages available -Price: per package -Weight: 15.6kg/package

gear motor, electric motor -Speed: 4 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 55 -Number: 1x engine available -Dimensions: -Weight: 73 kg

Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 31 kg

Gear motor, electric motor -Speed: 67 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.9 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 27/117 rpm -Power: 0.12/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Weight: 19.5 kg

Gear motor, electric motor -Speed: 32 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 165 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 21 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 57 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Brake: 220 V -Number: 9x motor available -Price: per piece -Weight: 14 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Weight: 18.5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21/41 rpm -Power: 0.88/1.3 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 660/230/H300 mm -Weight: 59 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 35 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 19 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 12 rpm -Power: 0.25 kW -Hollow shaft diameter: Ø 25 mm -Design: Hollow shaft angle -Protection class: IP 44 -Brake -Dimensions: 450/195/H190 mm -Weight: 23.2 kg

Centrifugal pump, water pump -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 11/21 rpm -Power: 0.2/0.28 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Brake -Dimensions: 450/200/H220 mm -Weight: 24 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 550/290/H276 mm -Weight: 17 kg

wire electrode, welding wire, welding wire -Net weight: 9 kg -Number: 1x packages available -Price: per package -Weight complete: 9.5 kg/package

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 0.8/1.6 rpm -Power: 0.12/0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 45 mm -Protection class: IP 55 -Dimensions: 670/300/H320 mm -Weight: 69 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 605/345/H330 mm -Weight: 65 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 27 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Number: 4x engines available -Price: per piece -Dimensions: 350/190/H185 mm -Weight: 13.2 kg/piece

centrifugal pump, water pump -Flow rate: 5-42 m³/h -Motor power: 0.75 kW -Speed: 1410 rpm -Inlet pipe connection: DN50 -Pipe connection outlet: DN50 - Quantity: 1 pieces -Dimensions: 570/230/H310 mm -Weight: 40kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 13 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 440/175/H185 mm -Weight: 21 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 670 rpm -Power: 0.26 kW -Design: B3 -Diameter shaft: 25 mm -Protection rating: IP 54 -Quantity: 1 piece available -Dimensions: 215/170/H420 mm -Weight: 17.3kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 355/182/H175 mm -Weight: 13 kg

x-travel: 19000 mm y-travel: 7600 mm z-travel: 2000 mm w-axis: 5000 mm table surface area: 18500 x 5000 mm table load: max. 500 t distance between columns: 5500 mm power capacity - milling spindle: 110 kW tool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kW weight of the machine ca.: 650 t Overhauled & modernized in 2007 equipped with: - CNC control FANUC 15i MB - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: BuR -Type: ECP6D4-0 -Number: 2x control cards available -Price: per piece -Dimensions: 220/120/H20 mm -Weight: 0.2 kg

5 power dimmers 5 Regulator Photo on request Picture on request

T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...

Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: BuR -Type: E163 -Number: 1x control cards available -Price: per piece -Dimensions: 220/135/H20 mm -Weight: 0.2 kg

Stuffing machine Eberhardt 5 x 7 Kaiserstüpfler, star rolls with 5 stud boxes Machine mobile Connection 400V, 16A-CEE plug Machine Many more bakery machines in stock!

Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: BuR -Type: ECPP40-01 -Number: 1x control cards available -Price: per piece -Dimensions: 220/140/H20 mm -Weight: 0.39 kg

easy pocket table roller Stainless steel Easy manual roll-out Roller adjustment 0.5 to 25 mm Manual operation

Step regulator, electronic control -Manufacturer: ELREHA -Type: STG-1903 -Type: STG1903 -Number: 2x control cards available -Price: per piece -Dimensions: 70/195/H130 mm -Weight: 0.9 kg

MR Etikettiertechnik model MR 413 self-adhesive labelling machine for vials, bottles, etc., suitable for round containers with a diameter of up to 80 mm, label height up to 150 mm, reel core diameter 76 mm, maximum outer reel diameter 350 mm, label press-on belt with a height of 150 mm, Open Date 53S thermal transfer printer for printing the variable data (expiry date, batch no., etc.) on the label with PCE Mini Smart camera system for the print verification, PCE pharmacode control, label presence control, reject of faulty vials/bottles when code and/or print are not valid or label is missing, electrics 230V/50Hz/2500W, compressed air max. 6 bar, includes Blume bottle infeed & outfeed table with a diameter of 1500 mm, required floor space including rotary tables approx. 6000 x 2300 mm (LxW), max. height approx. 1800 mm

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -with brake -Shaft diameter: Ø 25 mm -Wave height: 90 mm -Protection class: IP 54 -Dimensions: 470/200/H160 mm -Weight: 20 kg

Dear Ladies and Gentlemen, We have the following machine to offer: OKUMA EUROCENTER V50 Year of Make: 2002 Control: OSP U10M Machine hours (spindle running time): 18,074 Without vises and chuck

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 300 x 300 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals) - Pump output: 7.5 kW, 14.9 A - Total output: 28 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Weight approx.: 2,250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sink, sink -Stainless steel sink -Basin size: 345/345/H270 mm -Dimensions: 600/600/H505 mm -Weight: 15 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 98 rpm -Power: 0.75 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 440/260/H160 mm -Weight: 18 kg/piece

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Input: 1/N/PE AC 230 V 9 A 50/60 Hz -Output: 3/AC 0-230 V 4 A 0.75 kW 0-480 Hz -Price: per piece -Number: 7x available -Weight: 1.7 kg/piece

with compressed air accumulator 120 ltr, few operating hours

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm -Power: 0.25 kW -Construction: B5/B14 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 440/140/H185 mm -Weight: 12.5 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 405/250/H170 mm -Weight: 14.5 kg/piece

FOOD-TECH/ E044/ 2016 Blanching machine for carrots etc. 20 tons/h used, sold as it is, where it is, price ex location used, sold as it is, where it is, price ex location

One used mesh turning and stacking unit from EVG T6 D

Key data: 800 mm, 650 mm, 550 mm

Machine Details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG LID MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 800 mm Y-Travel 650 mm Z-Travel 550 mm control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm Turning Speed Range - Main Spindle max. 18,000 min/-1 Power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip-to-chip approx. 5.9 sec F ...