134,065 used machines on RESALE, but how to find them? Machine Search
Geared motor, electric motor, three-phase motor -Speed: 87/106 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 6x motors available -Price: per piece -Dimensions: 370/188/H155 mm -Weight: 9.5 kg
Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 270 x 105 x H 65 mm -Connection: 24 V DC 2x6 W -Number: 1x lights available -Price: per piece -Weight: 8 kg/piece
centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg
used
Extrusion recycling line made by EREMA type that has only been in use for a few years VACUREMA ADVANCED 1310T for the processing of rPET, Year of construction 2017, commissioning 2019, Capacity 600 kg/h, Approval in accordance with the standards of the F.D.A. (USA) and ESFA (EU) for the approval of the rPET granules produced with it is available. You can find more details at EREMA "Vacurema Advanced". Delivery Time: Short Term. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use
General Electric Äkta Valves and Pumps PV 908 INV 907 IV 908 P 960
tool clamping area: 1 - 32 mm weight: 8 - 12 kg Driven toolholders 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Can filler Eurostar type 9 TWIN with 9 filling valves and 2 x 1head seamer capacity: approx. 2.500 - 3.00 cph year of manufacturing: 2016 can format: 211/202 standard cans
4 x valve block with interface module EX250-SDN1 and with 20 x solenoid valve SV2100R-5FU
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg
Banderolier BandAll BA BA 32-20/77 ERH; serviced and inspected by customer service; Belt width 75mm; Frame size 320x200mm; Print mark control; suitable for paper and foil; Stainless steel; Automatic operation or by foot switch; Meter reading 102900. Banding machine BandAll BA 32-20/77 ERH; checked and tested by the support of BandAll; band width 75mm; frame size 320x200mm; Print Mark Control; used for paper or foil; stainless steel cover; automatic banding or using by foot switch; counter 102900.
WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/mi ...
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device
Traglsat: 7000kg Load center of gravity: 600mm Battery: 80V SN: T322080279
Air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg
Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg
Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Air blower, in box, 30Kw, 3Ph
Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg
Gear motor, electric motor -Speed: 33 rpm -Power: 0.75 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 540/200/H225 mm -Weight: 30 kg
Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg
Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph
geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg
Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg
pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor -Speed: 59 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 475/190/H170 mm -Weight: 18.90 kg
Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg
Gear motor, electric motor -Speed: 0.49 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 60 mm -Protection class: IP 54 -Dimensions: 740/380/H410 mm -Weight: 133 kg
Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector
ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg
Eillert G1500 belt slicer stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
Gear motor, electric motor -Speed: 2.5 rpm -Power: 0.25 kW -Design: B3/B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1x piece available -Dimensions: 630/260/H230 mm -Weight: 27 kg
Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg
feed pressure: 10 bar Effective free air delivery: 252 L/min Receiver capacity: 90 l / bar Number of cylinders: 1 Stk. motor: 400Volt / 1,5KW V / KW turning speeds: 777 U/min weight of the machine ca.: 70 kg. range L-W-H: 0,97 x 0,5 x 0,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Geared motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.25/0.3 kW -Design: B3 -Shaft diameter: Ø 30 mm -Length: 180 mm -Protection class: IP 44 -Dimensions: -Weight: 25 kg
Punching tool for EUROLINE 700 Used, Great condition Punching tool for bolt holder Table width 700mmm Ghost 4-r approx. 16 x 18 Easter chicks 4-r approx. 15 x 16 Heart 5-r approx. 11 x 11cm Boots 4-r approx. 14 x 18cm Moose 4-r approx. 17 x 15cm
Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece
Gear motor, electric motor -Speed: 45 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 440/215/H180 mm -Weight: 21 kg
Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Quantity: 1 piece available -Weight: 26 kg
Gear motor, electric motor -Speed: 113 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: -Weight: 16 kg
Gear motor, electric motor, three-phase motor -Speed: 84/128 rpm -Power: 0.48/0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Weight: 25 kg
Gear motor, electric motor -Speed: 80 rpm -Power: 0.14 kW -Construction: B3 -Diameter shaft: Ø 7 mm -Protection: IP -Number: 1x engine available -Price: per piece -Weight: 4.5 kg
Centrifugal water pump -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg
maximum number of results exceeded
please refine your search
