mh 800 e used for sale

Gear motor, electric motor -Speed: 128 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 370/200/H155 mm -Weight: 14.6 kg

Gear motor, electric motor, three-phase motor -Speed: 90 rpm -Power: 0.25 kW -Construction: B3 -Diameter hollow shaft: Ø 16 mm -Protection class: IP 55 -Dimensions: 315/195/H145 mm -Weight: 11.6 kg

geared motor, electric motor -Speed: 222 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Dimensions: 315/195/H140 mm -Weight: 11.5 kg

Gear motor, electric motor, electric gear motor -Speed: 0.37 rpm -Power: 42 kW -Brake: 220 V -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 44 -Dimensions: 500/230/H200 mm -Weight: 30 kg

Gear motor, electric motor -Speed: 100 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake: 220 V -Number: 1x available -Price: per piece -Dimensions: 520/150/H210 mm -Weight: 20 kg

Gear motor, electric motor -Speed: 41 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 405/200/H160 mm -Weight: 16 kg

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.12 kW -Construction: B5 -Diameter shaft: 16 mm -Protection class: IP 44 -Dimensions: 325/190/H140 mm -Weight: 12 kg

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Gear motor, electric motor, electric gear motor -Speed: 37 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Brake: 220 V -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H165 mm -Weight: 19 kg

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -Design: B5 -Protection class: IP 33 -Brake: 220 V -Quantity: 1x motor available -Dimensions: 510/210/H220 mm -Weight: 27 kg

Gear motor, electric motor, electric gear motor -Speed: 152 rpm -Power: 2.9 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Brake -Dimensions: 740/300/H280 mm -Weight: 65 kg

Gear motor, electric motor, electric gear motor -Speed: 23/100 rpm -Power: 0.15/0.6 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 560/230/H200 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, angular gear motor -Speed: 8.8 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 330/170/H140 mm -Weight per piece: 13 kg

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

Gear motor, electric motor -Speed: 8 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 470/200/H160 mm -Weight: 21 kg

Geared motor, electric motor, electric geared motor -Condition: unused -Speed: 28 rpm -Power: 0.37 kW -Design: B3 angle -Shaft diameter: 30 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 695/270/H185 mm -Weight: 32 kg

The ENR series are air-cooled chillers for industrial use for outdoor and indoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Cooling capacity 13.5 Kw We have a lot of chillers available directly from stock used and new. contact us for a non-binding offer.

Geared motor, electric motor, electric geared motor -Speed: 177 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Dimensions: 315/145/H190 mm -Weight: 11.7 kg

Gear motor, electric motor, three-phase motor -Speed: 69 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 55 -Dimensions: 455/200/H160 mm -Weight: 20 kg

Geared motor, electric motor, three-phase motor -Speed: 47 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 4x motors available -Price: per piece -Dimensions: 415/140/H170 mm -Weight: 10 kg

Dissolver Vollrath EWFX 60 Power 44 kW Speed range 200-1200 1/min Double-toothed pulley with wall scraper as good as new control cabinet with FU Very good condition, straight from production

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor -Body: made of stainless steel -Speed: 30 m/min -Motor power: 0.37 kW/59 rpm -Belt width: 390 mm -Length: 2050 mm -with driver: 325 x 150 mm -Transport dimensions: 2100/800/H570 mm -Weight: 160 kg

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 370/200/H150 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 66 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 310/200/H145 mm -Weight: 11 kg

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Jungheinrich EFG216 Forklift truck Serial: FN319410 2005, Electric forklift, max lift 1500Kgs, treble mast

geared motor, electric motor -Speed: 66 rpm -Power: 0.55 kW -Design: B5 angle -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Number: 1x motor available -Price: per piece -Dimensions: 420/250/H195 mm -Weight: 20 kg

Perfect binder Eurotecnica 425 Year of construction 2002 Art.Nr. PS6041

Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake: 24 volts -Dimensions: 380/200/H145 mm -Weight: 17 kg

Gear motor, electric motor -Speed: 22 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 18 mm -Protection class: IP 44 -Dimensions: 385/185/H190 mm -Weight: 14 kg

scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 34 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/260/H165 mm -Weight: 13 kg

Jungheinrich EJE116 Electric pallet truck Electric pallet truck, load capacity 1600Kgs, forks 1150mm, with spare battery

Jungheinrich EFG216K Forklift truck Serial: FN492262 Electric forklift, max lift 1500Kgs, treble mast, with charger

Gear motor, electric motor, electric gear motor -Speed: 51 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 410/170/H200 mm -Weight: 16 kg/piece

Inv. Num. : 7386 Type: Dimension Elite Producer: Eden Praine Created: 2015 Parameters: Weight: 128 kg Equipment: Cartridges with print cartridges

Gear motor, electric motor, electric gear motor -Speed: 54 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 380/240/H155 mm -Weight: 17 kg/piece

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 25 mm -Design: B5 angle -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 24.3 kg

Gear motor, electric motor, electric gear motor -Speed: 15 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 angle -Protection class: IP 54 -Brake -Number: 8x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 136 rpm -Power: 0.37 kW -Construction: B3 angle -Wave output: 2 -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 440/230/H220 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Brake: 24 volts -Number: 2x motors available -Price: per piece -Dimensions: 430/210/H220 mm -Weight: 16.8 kg

Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg

Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake -Dimensions: 465/185/H200 mm -Weight: 18.8 kg

Gear motor, electric motor, electric gear motor -Speed: 30 rpm -Power: 0.75 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 555/250/H250 mm -Weight: 40 kg

Perfect binder Heidelberg Eurobind 600, machine number FMDDA0 000027, year of manufacture 2007, 1 clamp, hot melt, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Staplers Hohner Economy 25/40 - 15/25 - 25 in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.