mh 800 e used for sale

Hot melt adhesive binder Fastbind Elite XT; good condition; cleaned and tested; Format A3+; hot melt; Binding length max.455mm; Binder thickness 140-320mm; Book thickness max.40mm; Tool for soft- and hardcover. Hot melt perfect binder Fastbind Elite XT; good condition; cleaned and checked; size A3+; hot glue; Max.Book Lenght 455mm; book lenght 140-320mm; Book Thikness Max.40mm; Tool for soft and hard cover.

GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Chain-type tool magazine 60 pocketsTool magazine with 60 positions, chain type with double gripper (differently from standard)Pneumatic set up station for tool loadingPneumatic set up station  ...

2 head Flat &, Saddle stitcher

Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) Machine data Parameter Value Unit / Notes Max. press force 4500 kN Stroke rate (continuous) min. 15 strokes/min Max. stroke rate (tool designed for) 75 strokes/min Ram stroke 3 – 200 mm Ram adjustment 120 mm Installation height (min.) 600 mm Max. installation height 670 mm Dimensions of press table Press table length 2000 mm Press table width 1250 mm T-slots (press table) DIN 650 – 28 H12 Number of T-slots (table) 11 pcs Distance between T-slots 150 mm Dimensions of press ram Slide length 2000 mm Slide width 1200 mm T-slots (slide) DIN 650 – 22 H12 Number of T-slots (slide) 13 pcs Distance between T-slots 150 mm Press frame opening Side opening 900 mm Front opening 2200 mm Tool clamping Tool clamping height (upper tool) 80 mm Tool clamping h ...

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

SPECIFICATIONS: Sliding table saw with 45° swiveling saw blade Diameter saw blade mm: 400 Diameter of the scorer mm: 120 Length of carriage mm: 3800 cutting width mm: 1600 Motor power KW: 5,5 Motor with brake Complete with: - 01 pneumatic presser - Digital control panel - Duplex continuous inclined cutter 0°-90°

Mains filter for frequency converters, PLC control, mains filter, mains filter -Lenze: Mains filter E94AZMS0094 -Dimensions: 530/100/H70 mm -Weight: 6.1 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Lenze: Brake resistor ERBS047R400W -Resistance: 47 Ohm/400W/800V -Dimensions: 480/110/H125 mm -Weight: 2.6 kg

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor, compact smart relay -Manufacturer: Schneider Electric -Type: SR1 A201BD -Dimensions: 125/90/H55 mm -Weight: 0.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA52 DT71D-4BMG -Speed: 9.3 rpm -Power: 0.37 kW -Hollow shaft: Ø 40 x 120 mm -Protection class: IP54 -Brake: 5 Nm -Bearing block: THK HSP 30 -Dimensions: 520/260 / H285 mm -Weight: 36 kg

Line filters, power line filters, three-phase filters, three-phase line filters -Manufacturer: EPCOS -Type: FS.06.3.50 -Voltage: 440/250 V/3 x 16 A/50-60 Hz -Dimensions: 200/155/H80 mm -Weight: 3.6 kg

Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheel: Ø 170 mm, speed 3000 rpm -Max. steel cross-section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm -Weight: 500 kg

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Column Drilling Machine ALZMETALL AB3 ESV Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 320 mm -Bore center: Ø 25/40 mm -Height: 110 mm -Groove width: 14 mm -without transport hook -Dimensions: 540/470/H200 mm -Weight: 64 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg

Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

Gear motor, electric motor -SEW-Eurodrive: gear motor type RF60DT90S4B -Speed: 72 rpm -Power: 1.1 kW -Construction: B5 -Brake: 10 Nm -Diameter shaft: Ø 30 x 60 mm -Protection class: IP 44 -Dimensions: 620/280 / H215 mm -Weight: 41 kg

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t

air flow quantity: . m³/h suction power: . kPa power capacity: 16 kW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: . kVA capacity in kVA: . kVA Heating capacity: . kW power fuel: . 0 weight of the machine ca.: . t dimensions of the machine ca.: . m Construction site electricity distributor 550 x 400 x 1350 The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3200 , 1300 , 200

Processing field 1300 x 3200 mm Z axis 200 mm 2 Fields of work Automatic lubrication Rotary tool changer 8 slots removable with tool changer on the machine stand or change on 12 seat changers Net weight approx. 4 ton

Packaging Automation Eclipse SL6 Tray Sealer High speed machine 6-tray tooling Tray size (mm): approx internal: 155 x 110; external: 170 x 123

Gear motor, electric motor, three-phase motor -Gearbox: SEW type R17/A/112GD -Motor: SEW type R17/112GD DR63L4/TF/II3GD -Power: 0.25 kW -Speed: 36 rpm -Shaft: Ø 20 x 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 355/180/H140 mm -Weight: 8.5 kg

Relay, contactor, semiconductor contactor, contactor -Elero: Uni-Tec 868 wireless wall transmitter -Application: roller shutters, awnings blinds, special applications -Price: per piece -Number: 1 pieces -Dimensions: 81x81x22 mm (LxWxD) -Weight 0.1 kg/piece

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Batch intensive mixer with a maximum batch capacity of 1,250 l. / 3,600 kg, equipped with: Drum drive 22.0 kW (drum speed: 8.4 rpm), mixing star drives 2 x 22.0 kW (mixing star speed: 39 rpm), hydraulics power pack for discharge gate 3.0 kW, lubrication pumps 2 x 0.18 kW. Previous use: Production of ready-mixed concrete.

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: TM, contactor -Type: EV3-1 -Voltage: 220 V 50-60 Hz -Dimensions: 110/75/H70 mm -Weight: 0.4 kg

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: TM, contactor -Type: EV3-2 -Voltage: 220 V 50-60 Hz -Dimensions: 110/75/H70 mm -Weight: 0.4 kg

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm -Weight: 0.4 kg

Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

Conveyor Belt, Belt Conveyor Belt, Conveyor Belt, Belt Conveyor, Chain Conveyor, Pallet Conveyor Belt, Pallet Conveyor -Drive: geared motor SEW-Eurodrive with brake 0.55 kW/15 m/min -Weigh cell: Bizerba HLC-C3 -Chain track width: 750 mm -Dimensions: 1995/990/H480 mm -Weight: 334 kg

Manufacturer: Elumatec Type: MGS 72/30 Swivel range 0° - 45° infinitely adjustable to the left and right Resting points 15° - 30° - 45° Saw blade:: ø380mm Motor: 3 kW Speed: 2800 tpm Weight 120 kG Condition functionally tested

Dissolver Agitator Ekato EM 040 EX protected version Power 1,3 kW Speed range 80-400 1/min Mixing tank stainless steel 350l mobile on wheels brand-new condition

Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

Power supply, power supply, DIN rail power supply, switching power supply -Manufacturer: EMS, Power Supply -Type: D602 -Input: 115/230 V 50/60 Hz -Output: 5 V 500 mA -Dimensions: 115/100/H50 mm -Weight: 0.7 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4G -Voltage: 110 V -4 sockets: remote controllable -Incl. Accessories: see photo -Dimensions: 220/260/H55 mm -Weight: 1.6 kg

4 Axes CNC Machining Center for working of bars of aluminium, PVC, light alloys in general and steel pieces up to 2 mm X AXIS (longitudinal) (mm) 4.000 Y AXIS (transversal) (mm) 270 Z AXIS (vertical) (mm) 420 A AXIS (electrospindle rotation) 0° ÷ 180°

We offer For Tetra Pak TBA 8 Calibration gauge for TBA 8 aseptic filling machines for the volumes: 1000 ml slim, 1000 ml base, 1500 ml slim LSC Prior sales reserved