135,500 used machines on RESALE, but how to find them? Machine Search
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 200 mm centre distance: 1.000 mm spindle turning speed range: 1600 U/min spindle bore: 42 mm turning length: 1600 mm turning diameter over bed: 410 mm : 230 mm machine weight ab.: 1.700 kg dimensions: 2000 × 1000 × 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: - : - power capacity: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric motor durchfl. Water-cooled Three-phase asynchronous motor Manufacturer : ELIN Model : MKH-435 K04 Z9Z Power: 315kw Connection: 400 V RPM: 1336 rpm Weight: approx. 1700kg NEW, orig. packaging, unused from old stock see pictures for more details.
ESSA RE 8 ist eine Exzenterpresse für präzise Arbeiten mit hoher Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Druck 4 to; 2 Ständer; fester Tisch 210x210 mm; Tischdurchbruch Ø80 mm; Durchgang längs 230 mm; Werkzeughöhe 148 mm; Hub 27 mm; Verstellstoss 40 mm; 50–150 Hübe/min. Technische Daten: festes Maschinenbett; Anschluss 50 Hz 3x 380 Volt; Leistung 0.75 CV; Gewicht ~500 kg; Abmessungen 700x600x1400 mm. Erreicht enge Toleranzen; Einsatz in Automotive, Luftfahrt, Werkzeugmaschinen, Medizin, Uhrenindustrie. Technische Daten ohne Gewähr
KELLER ENA 1.0-V ist ein Staubsauger mit hoher Präzision, ausgelegt für hohe Genauigkeit und zuverlässigen Betrieb. Wichtige Leistungsdaten: angesaugte Luft 1000 m3/h; Drehzahlen 2850 t/min. Haupttechnische Daten: Anschluss 50 Hz 3x: 400 V; Antriebsleistung des Hauptmotors 2 kW; Abmessungen Länge 1200 mm x Breite 800 mm x Höhe 2300 mm. Konzipiert zur Integration in industrielle Fertigungsprozesse. Ermöglicht enge Toleranzen und ist geeignet für Bereiche wie Holzverarbeitung, Metallbearbeitung, Automobilindustrie und Präzisionsfertigung. Technische Daten ohne Gewähr
ESSA RE 8 ist eine Exzenterpresse, präzise, hochgenau und zuverlässig. Kapazitäten: Druck 4 to; TischØ 220 mm, LochØ 80 mm; 50-150 c/min; Durchgang längs 230 mm; Fester Hub 27 mm; Verstellbarkeit Stößel 40 mm; Werkzeughöhe max. 148 mm. Technische Daten: Anschluss 50 Hz 3x 400 Volt; Leistung 0.75 CV; Gewicht ca. 700 kg; Abmessungen L1100 x B900 x H1600 mm. Zubehör: Sicherheitsvorrichtung, Lampe, Schallschutzkabine. Erzielt enge Toleranzen; typisch für Automotive, Feinmechanik/Uhren, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
ESSA ist eine Exzenterpresse, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten: Druck 1.5 to; bis 180 c/min; fester Hub 27 mm. Technische Daten: Anschluss 50 Hz 3x: 380 Volt; Maschinengewicht ca. 150 kg; Abmessungen L 700 mm x B 650 mm x H 1700 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrmacherei, Werkzeugmaschinen, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr
ESSA EC 1.5 ist eine Exzenterpresse, ausgelegt für präzise, hochgenaue und zuverlässige Bearbeitung. Arbeitskapazitäten: Druck 1.5 to; bis 180 c/min; fester Hub 27 mm. Hauptspezifikationen: Anschluss 50 Hz 3x 380 Volt; Maschinengewicht ca. 150 kg; Abmessungen L700 x B650 x H1700 mm. Zubehör: Fußpedal, Werkstückzähler und diverses Zubehör. Erzielt enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr
ESSA ist eine Exzenterpresse für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Druck 1.5 to; bis 180 c/min; fester Hub 27 mm. Technische Daten: 50 Hz 3x 380 Volt; Maschinengewicht ca. 150 kg; L700×B650×H1700 mm. Zubehör: Fußpedal, Werkstückzähler. Eignet sich für enge Toleranzen; Branchen: Automotive, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr
KELLER ENA 1.0-V ist ein Staubsauger mit hoher Leistung, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Hauptleistungen: angesaugte Luft 1000 m3/h; Drehzahlen 2850 t/min. Technische Daten: Anschluss 50 Hz 3x 400 V; Antriebsleistung 1 kW; Abmessungen L 1200 mm × B 800 mm × H 2300 mm. Ermöglicht enge Toleranzen und eignet sich für Automotive, Luftfahrt, Maschinenbau und Medizintechnik. Technische Daten ohne Gewähr
MAKINO EDNC 30F ist eine Senkerodiermaschine, ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Tisch 500 x 350 mm mit 4 T-Nuten (10 mm, Abstand 80 mm), max. Tischbelastung 500 kg; Verfahrwege X 300 mm, Y 250 mm, Z 250 mm; größtes Elektrodengewicht 50 kg; Dielektrikum 60 l (650 x 450 x 300 mm). Technische Hauptdaten: Eilgang 20 m/min; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 4100 kg; Abmessungen 2800 x 2200 x 2300 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft-/Raumfahrt, Medizintechnik, Uhrenindustrie, Werkzeugbau. Technische Daten ohne Gewähr
ELBARON TEB/BV2 ist eine Luftreinigungsanlage mit hoher Präzision, entwickelt für Genauigkeit und Zuverlässigkeit. Angesaugte Luft: 620 m3/h. Anschluss: 50 Hz 3x 400 V; installierte Leistung: 0,55 kW; Eigengewicht: 50 kg; Abmessungen (LxBxH): 1100x500x500 mm. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizinbereich und Werkzeugmaschinenbau. Technische Daten ohne Gewähr
ELBARON TEB/BV2 ist eine Luftreinigungsanlage, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Angesaugte Luft 620 m3/h. Abmessungen 1100×500×500 mm; Eigengewicht 50 kg. Anschluss 3x 400 V, 50 Hz; installierte Leistung 0.55 kW. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhrenbranche und Werkzeugmaschinen. Technische Daten ohne Gewähr
SCHMIDT EP345 ist eine Elektropresse, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Hub maximal 150 mm, Geschwindigkeit 200 mm/s, Presskraft 10 kN; Eigengewicht 59 kg. Technische Eckdaten: Geschwindigkeit 200 mm/s, Hub 150 mm, Presskraft 10 kN, Gewicht 59 kg. Ermöglicht das Erreichen enger Toleranzen und eignet sich für Automobilindustrie, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt sowie Medizintechnik. Technische Daten ohne Gewähr
BURKARDT HK 160I / So is a Exzenterpresse, ausgelegt für Präzision, hohe Genauigkeit und zuverlässigen Dauerbetrieb. Leistungsdaten: Druckleistung 1600 kN; fester Tisch Länge 1200 mm × Breite 970 mm; Verstellbarkeit des Stössels 120 mm; bis zu 90 Hübe/min. Technische Daten: Anschluss 50 Hz, 3×400 V; Maschinengewicht ca. 32’000 kg; Abmessungen Maschine L 3200 × B 1600 × H 4400 mm; Abmessungen Elektroschrank L 1600 × B 500 × H 2450 mm. Ausstattung: Zweihandauslösung. Ermöglicht enge Toleranzen; typische Einsatzbranchen: Automobil, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik, Feinmechanik/Uhrmacherei Technische Daten ohne Gewähr
EBOSA D 38 ist eine Kantenbearbeitungsmaschine, konstruiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Wesentliche Arbeitsbereiche: Längsweg (X-Achse) 6,5 mm, Querweg (Y-Achse) 7 mm, Durchmesser 40 mm, Drehzahlen von 5800 t/min. Technische Daten: Anschluss 50 Hz 3×380 V, Antriebsleistung Hauptmotor 0,73 kW, Maschinengewicht ca. 290 kg; Abmessungen L1000 × B800 × H1270 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenbranche, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
grinding diameter: 715 mm grinding length: 2000 mm centre height: 360 mm control: Siemens 840 D centre distance: 2000 mm max. workpiece weight between centers: 650 kg Grinding spindle:: Spindlespeed: 450 min/-1 driving power - grinding spindle: 7,5 kW taper: 1:5 tool taper: mm feed speeds: 0,01 - 15.000 mm/min travel -x axis: 500 mm travel -z axis: 2700 mm : 280 ° grinding speed: 15 m/min total power requirement: 75 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 5 x 2,4 m External cylindrical grinding machine modernised in 2022 -- Siemens 840D / electrical system -- Ball screws on the X and Z axes replaced -- B axis repaired and encoder replaced. -- Hydrostatic system replaced. Equipped with: - Siemens 840D PowerLine CNC control (X, Z, C, B axes) - Marposs measuring system - BalaDyne system - Tailstock - Band filter system The data for this ad was created with Mo ...
reifenhause, enka technica spunbond nonwoven spinerettes. hollow fiber spinerette , standard fiber spinerrete, fine fiber spinerettes. from 5.000 - 45.000 eur
Key data: 710 KW, 2 1/min
Biogas CHP 710 kWel., MAN E 3872 LE 201, with generator Leroy Somer including mains start device, control cabinet with touch display, gas control system, complete heating system including emergency and mixing table cooler and transfer plate exchanger, exhaust gas silencer as chimney height 10.0m, SCR control incl. Oxi/ SCR honeycombs, exhaust gas heat exchanger with bypass, gas blower, in a 10m sound insulation container. Short-term delivery possible
Process water evaporation system (vacuum evaporator) for water treatment. Technical data of the nameplate Manufacturer: KMU Umweltschutz GmbH (Steinen-Höllstein, Germany) Description: Process Water - Evaporation Plant Model / Type: PROWADEST 40 Year of Make: 1995 Distillation capacity: 42 l/h (litres per hour) Voltage: 230/400 V, 50 Hz Total connected load: 6.7 kW
Key data: 470 A, 550 , 60
Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition. ...
Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg
We sell a winding and pulling machine for electric motors. The system has three winding stations, a pulling station and an intermediate molding machine. Since an electronic card is defective, the machine is only partially functional at the moment. The facility is in good condition.
Strokes: X:300 mm - Y: 250 mm - Z:250 mm Maximum speed (manual mode): 15 mm/s Table dimensions L x W: 397 x 300 mm Maximum weight of the part: 200 kg Work tray size LxWxH 180 x 620 x 420 mm Capacity :55l Watering: injection Maximum weight of the electrodes: 25kg
turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TECHNICAL SPECIFICATIONS – BASIC UNITSystem footprint: 12.3 sq m Length: 3.5 m Width: 3.5 m Height: 3.0 m Total weight including dielectric fluid: 6,500 kg Connected load (45/90 A generator): approx. 6 / 9 kVA Supply voltage: 380 V Connection: RST/MP/S Fuse rating (45/90 A generator): 25 / 35 A Operating current corresponding to the generator: 45 / 90 AWORKPIECE AND ELECTRODEPermissible workpiece dimensions: 900 × 900 mm Workpiece clamping surface: 900 × 900 mm Max. table load: 1,000 kg Max. electrode weight with pneumatic clamp: 100 kg Max. electrode weight directly on the quill: 250 kg Min. distance table – electrode holder: 220 mm Max. distance table – electrode holder: 620 mmWORKING TANKMirror height from table: 450 mm Internal width: 900 mm Internal length: 900 mm Max. capacity: 415 lCLAMPING PLATELength: 900 mm Width: 900 mm Threaded hole size: M10 Threaded hole spacing: 1 ...
ALKO ECO-JET 35/3N onderdruk afzuiging, met perslucht reiniging Manufacturer: ALKO Type: ECO-JET 35/3N Year: 2004 M-Nr.: 33184130 Vacuum filtering plant: Diameter dust extraction pipe: ø250 mm Length: 2.925 mm Width: 1.230 mm Height: 3.440 mm Weight: 816 kg Capacity: 3.000 m3 /uur Pressure: 3,050 Pa Power: 4.kW, 380V, 9 Amp Filter surface: ca.23 m2 Cleaning: Inclusive Average noise level: 77 dB(A) Fire safety precaution: Sprinklers – pipe with connected to automatic fire fighting system Scope of supply: Filtering installation, machine control,
Key data: 5 mm, 10 mm, 3160 mm
EBM edge banding machine KDP 111 SLK - built in 1991 -11.5 kW motor, banding from 0.8-5 mm, verst. Cross-cut knife (roll separation up to 3 mm) Rapid heating basin, HF cross-cut sawing unit, HF flush milling unit, HF chamfer or Radius milling unit, pull-out workpiece support, heated inlet ruler complete with 2-part sound insulation hood and central extraction - Good condition - Length approx. 3,160 mm Depth with roller plate approx. 1,230 mm Workpiece width, min. 90 mm Workpiece thickness, min. 10 mm Workpiece thickness, max. 50 mm Workpiece length, min. 260 mm -Operating instructions available
Electric forklift with rotator, 3 tonnes, EFG 430k 330ZT, Jungheinrich, used - refurbished Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The forklift truck comes from a certified manufacturing company. According to the advertisement, it has been in use for 15,000 hours. All servicing and inspections have been carried out by the manufacturer. Technical specifications: - Year of manufacture 2015, load capacity 3,000 kg, model EFG 430k 330ZT, - Lift height 3,300 mm, overall height 2,325 mm, - The 80 V battery is sufficient for light-duty use. - Battery with automatic water-filling system - Standard mast, cab without doors, - Includes a professional Kaupp S 8-DE 28-S-G rotator - Side shift on the fork tines - Includes battery charger, We would be delighted to invite you to our premises for a detailed inspe ...
EWM MIRA 301 MIG KGE Welding machine Manufacturer EWM Model MIRA 301 MIG KGE Condition untested Location 35614 Aßlar DE Lot 53
Additional technical specifications: • max. negative pressure: 2400 Pa • max. volume flow: 1000 cbm/h
incl. matching hand-held unit
pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
EDI system mounted on steel frame for the fully automatic production of ultrapure water. Normally, the system is operated following a UO system. The plant consists essentially of: 1.The EDI system consists of 3 parallel stacks of the type MK2E (total of 6 stacks and 2 centrifugal pumps). Both roads are mounted on a common frame. one below, the other above in the frame. 2. Piping and EDI cells 3. Fittings, flow meters and centrifugal pumps
Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. 2x compressed air diaphragm pumps Almatec Futur 50T / 1x Almatec E10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.
The system consists of a stainless steel vessel with a boiling and condensation chamber. It is equipped with defoaming, sight glass with lighting and cleaning. Furthermore, a concentrate pump, distillate pump and a vacuum pump as well as a piston compressor are available.
Dustomat P-20 Mobile Dust Extractor with Flexible Extraction Arm The ESTA Mobile Dust Extractor - DUSTOMAT P-20 is a device specially designed for professional dust extraction, which meets the highest requirements for air purity in industrial and commercial areas. With its robust design, compact design and uncomplicated handling, this model offers a reliable and efficient solution for the removal of fine dust and coarse particles. Compared to similar dedusting systems, the device impresses with a high air volume flow, a generously sized dust collection container and a long service life of the filter elements. Application: Single and multi-station extraction in industry and trade Free-flowing dusts Dry Chips especially for wood dusts Welding fumes and metal dust Metal shavings and grinding dust Special feature: Automatic Jet-Pulse filter cleaning Integrated impact ...
3-stage evaporator made by Manzini. Juice flow rate: 5000 L/h Ira 7 aroma catcher, juice flow rate: 7000 L/h Manufacturer: Manzini New: 1979 Type: 3-stage falling film Aroma recovery: none Evaporation capacity: approx. 6 t H₂O/h Steam consumption: approx. 2.8 t/h Specific steam loss: approx. 0.43 kg/kg of evaporated water Electrical power consumption: approx. 80 kW Operating power: approx. 120 kW
Ballfood Extru25 screw extruder Screw extruder designed for high capacity dough production, variable speed, with ball rolling machine, 1Ph
Surplus/Never Used/Never Installed Enerflex Built Electric Driven Natural Gas Compressors with a 400 H.P. Motor & Ariel JG2/1 Compressor Four (4) Surplus, Never Used, Never Installed, Enerflex built, Natural gas compressors, with a US Electric Motor, 400 H.P. 1800 RPM Motor, an Ariel compressor JG2/1 Single Piston Compressor, Air Gas Cooler, Assembly, Logix PLC on each unit, Automatic Recycle Valve for Capacity Control, Dual Coalescent Filters and Scrubbers.
maximum number of results exceeded
please refine your search
100 € 
