mh 800 e used for sale

Bread slicer MHS Ideal SB Bread slicer - used - in working order - Type MHS Ideal SB - Year of manufacture 2011 - 3 adjustable cutting widths (10, 12 and 14 mm) - Exterior dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve manifold -Solenoid valves: Type 525179 MHP4-MS1H-3/2G-1/4 RR-FTO-KC-2018-1055 -Battery block: MHA4-PR4-3-1/4 525235 -Individual components: see photos -Number: 7x valve manifolds available -Price/Fee: per unit -Dimensions: 260/155/H100 mm -Weight: 2 kg/pc.

Key data: 600 mm, 400 mm, 400 mm

MAHO MH 600 E CNC milling machine – used, functional (only for commercial use) For sale is a MAHO MH 600 E CNC milling machine from 1989 in used condition. The machine shows signs of wear and tear according to its age, but is basically in functional condition and is currently under power, so that an inspection and demonstration during operation is possible at any time by arrangement. Technical data: Travels: X 600 mm / Y 450 mm / Z 450 mm Spindle speed: max. 4,000 rpm Tool holder: SK40 Condition / Notes: Machine running and ready for use All axes can be moved Control system functional Z-axis clearly audible during the process (according to the fitter's statement, not unusual for this type) Slipper clutch of the Z-axis is oily and should be replaced when the opportunity arises Note: Sale only to tradespeople Under exclusion of any warranty and guarantee N ...

Robot Yaskawa Motoman MH50 DX100 complete Control: DX100 Max. load capacity: 50 kg Max. working range: approx. 2061 mm Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Sandblasting machine MHG SMG 45K -Working space 1000x600x750mm -Work gloves -Two side doors, dustproof closing -Double-walled, noise-absorbing foamed -On/Off Suction & Lighting -Pressure regulators, pressure gauges and foot switches -Viewing panel Dimensions: LxWxH 1.5x1.5x1.8 / Weight 380Kg

Fully automatic bread slicer MHS Type: MHS IDEAL SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm automatic bread grippersuitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process. Clean without having to move the machine 230 Volt / 1.0 kW / 4.8 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2011 Function checked, machine ready for immediate use!

Two old compressors are available. 1) Oil-lubricated screw compressor Ingersoll Rand SSR MH 22, year of manufacture: 2001, max. operating pressure: 10bar, power: 25.5kW, weight: approx. 500kg. 2) Oil-lubricated piston compressor Blitz D2N 1500 A/U, year of manufacture: 1979, max. operating pressure: 15bar, air flow rate: 1400l/min, power: 15HP. An on-site inspection is possible.

sheet width: 1530 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.0 mm no. of strokes: max. 34 Hub/min cutting angle: 2.70 Grad distance between columns: 1540 mm work height max.: 920 mm voltage: 400 V Control: konv. engine output: 3.2 kW weight of the machine ca.: 1115 kg. range L-W-H: 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions Optional accessories included: - Sheet metal holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26209 Technical data: - Max. working width 1020 mm - Max. material thickness 2.5 mm - Cutting angle 2.4 ° - Stroke rate up to 34 1/min - Manual backgauge with digital position indicator 500 mm - Table height 850 mm - Front angle stop - Front pull-out material support - Pneumatically supported sheet metal hold-up with sheet metal removal to the front - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Mounted on steel plate - Pneumatic connection 6 bar - Drive 400 V / 3 kW - Space requirement approx. W 2100 x H 1150 x D 2200 mm - Weight approx. 1400 kg

General SKU291Y520 LocationBarneveld MakeBrogli TypeMulti-homo 10-C No.1721 Main Features MaterialStainless steel Volume10 Ltr. Motor0.4 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity10 l. Vessel sizesDia. 265x230 mm Dished bottomcheck Hollow bottomcheck Flat top sidecheck With covercheck Top connectionscheck OutletDN25 With jacketcheck Max. temperature0°C-140°C With propellor stirrercheck With anchor stirrerwith scrapers Motor0,2 kW, 380 V., 1400 rpm With homogenisercheck Motor0,20 kW, 380 V. MaterialStainless steel 1.4552 With jacketcheck General Year of constructionunknown Mounted on legson wheels With switchcheck Floorspace1,10x0,70 m Total height1,25 m Weight300 kgGeneric medicinesOintmentsBiotechnologyPlastic & polymersDetergent & surf.CosmeticsProcessing vesselsFood additivesLubricants & oleoConfectioneryBiophar ...

x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min spindle taper ISO: 40 quill stroke: 50 mm range L-W-H: 1600x2000x1850 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 210 mm z-travel: 340 mm table-size: 600 x 400 mm spindle turning speed range: 40-2000 U/min spindle taper ISO: 40 quill stroke: 60 mm range L-W-H: 1200x2000x1700 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRIPET MHPE 500 ist eine Flachschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 600x200 mm, Schleiflänge 500 mm, Schleifbreite 200 mm, Schleifhöhe 300 mm; Längsweg 530 mm, Querweg 220 mm. Technische Daten: automatischer Quervorschub stufenlos bis 9 m/min, Tischgeschwindigkeit stufenlos bis 21 m/min, Kriechgang 0,5–8000 mm/min; Schleifscheibe Ø225x25 mm, Drehzahlen 1000–2700 t/min; Schleifspindelmotor 1,8 kW; Anschluss 3x 380 V 50 Hz; Gewicht ~800 kg; Abmessungen Maschine 1000x700x1500 mm; Elektroschrank 800x600x1500 mm. Zubehör: Kühlmitteleinrichtung, Magnetplatte 500x200 mm, Abrichtvorrichtung, Schleifscheibe mit Flansch, Spritzschutz. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizin und Uhrenbau. Technische Daten ohne Gewähr

TRIPET MHPE 500 ist eine Flachschleifmaschine hoher Präzision, mit großer Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 600×200 mm; Schleiflänge 500×200 mm; Schleifhöhe 300 mm; Wege X 530 mm, Y 220 mm; Schleifscheibe Ø225×25 mm. Daten: Scheibendrehzahl 1.000–2.700 1/min; Spindelmotor 1,8 kW; stufenlose Vorschübe (Quer bis 9 m/min, Tisch bis 21 m/min); Kriechgang 0,5–8.000 mm/min; Anschluss 3×380 V 50 Hz; Gewicht ~800 kg; Abmessungen 1000×700×1500 mm. Zubehör: Hydro-Elektroschrank, Kühlmitteleinrichtung, Lampe, Zentralschmierung, Spritzschutz. Geeignet für enge Toleranzen; Branchen: Automotive, Uhrenbau, Werkzeugmaschinen, Luftfahrt. Technische Daten ohne Gewähr

TRIPET MHPE 500 ist eine Flachschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsvermögen: Tisch 600×200 mm, Schleiflänge 500 mm, Schleifbreite 200 mm, Schleifhöhe 300 mm; Achsen: X 530 mm, Y 220 mm. Technische Daten: Tischgeschwindigkeit stufenlos bis 21 m/min, Quervorschub stufenlos bis 9 m/min, Kriechgang 0,5–8000 mm/min; Schleifscheibe Ø225×25 mm, 1.000–2.700 min-¹; Schleifspindel 1,8 kW; Anschluss 3×380 V 50 Hz; Gewicht ~800 kg; Abmessungen Maschine 1000×700×1500 mm, Steuerung 800×600×1500 mm. Zubehör: Hydro-Elektroschrank, Papierfilteranlage, Magnetplatte 500×200 mm, Zentralschmierung. Erreicht enge Toleranzen; Anwendungsbereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Seriennummer: 4598/09/05, Spannung: 230 V, Frequenz: 50 Hz, Innenabmessungen: ca. 1100 x 600 x 550 mm

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

Transnorm Rising falling Incline with arch belt conveyor GF 6200-800-900-800 RA2180 Technical data: Conveyor length (NL): 7000 mm (6200 mm incline + 800 mm arch) frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7000 ( 6200 + 800 ) Nominal / outside width ...

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

Linear slide, toothed belt axis, stroke 800, EGC-185-800-TB-KF-0H-CK, 556817, Festo, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. Festo linear slide, toothed belt axis, EGC-185-800-TB-KF-0H-CK, 556817, Festo, second-hand Overall dimensions: 1143x190x170mm, approx. 65kg Table 280x110mm, stroke 800mm, bore for drive shaft 32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of t ...

Key data: 1000 kg, 6800

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800 x 800 Plate size: 800 x 800 mm Chamber number: 100 pieces Filter pressure: 15 bar

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800x800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: min. 380 bar / max. 440 bar

ZKG tanks / storage tanks / tank / pressure tanks in V2A with cooling jacket and insulation Operating pressure: 3.0 bar test pressure: 4.0 bar Capacity: 2,800 litres NEW! Surface: inside and outside 2B = IIIC material: V2A (AISI 304) 1.4301 Top shelf: â?¢ with 2 loops â?¢ with threaded weld NW 25 â?¢ with CIP cleaning NW 40 â?¢ with below drawn pipe DN 32 with fermentation sheet pile valve (with pressure relief valve, with pressure gauge)(gegen Aufpreis) Tank cylinder: â?¢ with wire hook up â?¢ with manhole oval 430 x 330 mm, with handle â?¢ with cooling jacket H = 750 mm and with insulation â?¢ with test valve DN 15 with spiral in V2A (extra charge) â?¢ with Tauchschafthülse with temperature display (extra charge) â?¢ on the back of the tank 2 x connecti ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on ext ...

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t

C - bow, Ziehm Exposkop 8000, monitor cart with dual monitor. digital image storage, good condition, also as a possible loaner

cutting effort 800t the number of strokes (no load) 20 /min single strokes 16 /min course a support of the blades 125mm Main drive motor 55 kw in 1475 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800 900 N/mm2 square mm 160 150 132 118 106 100 round mm 170 160 140 125 112 106 strip steel 425x 67 60 53 47 42 38 320 x 80

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010

Key data: 1620 mm, 1915 , 1215

Machine type: EVP-A 800 Manufacturer: ERBA Power kW: 5.5 Total volume: 1.000 lt. Description: The EVP-A 800 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional cost ...

Key data: 1620 mm, 1915 , 1215

Machine type: EVP-RA 800 Manufacturer: ERBA Power kW: 5 Total volume: 835 lt. The EVP-RA 800 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 800 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories,  ...

Key data: 1050 mm, 1958 , 1200

Machine type: EVK 800 Manufacturer: ERBA Heating element kW: 5.5 Total volume: 800 lt. Description: With the ERBA EVK 800 granulate dryer, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 800 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor -Manufacturer: BR Elektronik / Grenzebach, Computer -Type: Mini PC 8000 -Number: 1 computer available -Dimensions: 385/210/H95 mm -Weight: 4.4 kg

Stainless steel storage box, transport box, pallet box, crate, box -Material: Stainless steel 4301 Quantity: 1 piece available -Dimensions: 1150/800/H920 mm -Weight: 98 kg

Ekomex Vacuum Tumbler is a professional vacuum tumbler designed for marinating, curing, and massaging meat products. The vacuum process ensures even marinade absorption, improves product texture, and enhances the overall quality of the finished product. The 800-liter drum capacity makes it suitable for medium and large-scale production facilities. Adjustable drum speed allows the process to be adapted to different raw materials and production requirements. Manufactured from stainless steel, the machine is designed for reliable operation in meat and food processing environments. Technical Specifications Manufacturer: Ekomex Model: MV 800 Machine Type: Vacuum Tumbler Drum Capacity: 800 L Recommended Load Capacity: Up to 50% of volume Drum Speed: 1–8 RPM Dimensions: 2200 × 1500 × 1600 mm Weight: 700 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Electronicon, Capacitor MKP 18 µF -Type: E12.D78-401 800 -Number: 2x capacitors present -Price: per piece -Dimensions: Ø 35 x 105 mm -Weight: 0.1 kg/pc.

C - bow is in good technical and optical condition

Stock number: 3912 PROCESSING Manufacturer: EXCELL, Type: 810 Machine NO.: ES 8031, Year of manufacture: 0 Specifications: Table size 900 x 480 mm Large table load 400 kg Longitudinal movement (X) 810 mm Transverse movement (Y) 510 mm Vertical movement (Z) 560 mm Size distance spindle/table 700 mm Spindle Taper 40 Iso Spindle motor 9 Kw Tool changer 25 places Control Fanuc OM Fabr. Accessories: Cooling water system. Operating instructions Length: 2200 mm, Height: 2600 mm, Width: 3500 mm, Weight: 5400 kg

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Oil-Insulated Power Transformers for Sale - Manufacturer: ELIN - Model: JDR 8000/110 - Power Rating: 8 MVA - High Voltage: - 124.85 kV (Position 9) - 110 kV (Position 0) - 95.15 kV (Position -9) - Low Voltage: 25 kV - Current Rating: - High Voltage: 37.5 A (Position 9), 42.0 A (Position 0), 47.7 A (Position -9) - Low Voltage: 185 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1960 - Status: Out of service since early 2024 - Notable Condition: Low oil inhibitor content and specific resistance; otherwise, oil is in good condition. Oil treatment with inhibitor replenishment recommended. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.