mh 800 e used for sale

welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg

Three-phase motor, electric motor -Manufacturer: Elektrim, Electric motor type SKG90L4PC T -Power: 2.2 kW -Speed: 1380 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Quantity: 1x motor available -Price: per piece -Dimensions: 350/200/H225 mm -Weight: 21 kg/pc.

three-phase motor, electric motor -Manufacturer: Elektrim, electric motor type SKG90L4PC T -Power: 1.1 kW -Speed: 1415 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Dimensions: 310/175/H230 mm -Weight: 15 kg

electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg

Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

electric motor, three-phase motor -Manufacturer: Elektrim, electric motor type Sg 63-2B -Power: 0.25 kW -Speed: 2760 rpm -Shaft: Ø 11 x 25 mm -Design: B3 -Protection class: IP 55 -Dimensions: 215/124/H165 mm -Weight: 4.3 kg

Electric motor, three-phase motor -Manufacturer: Elektrim, electric motor type Sh 80X-2C -Power: 1.5 kW -Speed: 2800 rpm -Shaft: Ø 19 x 40 mm -Height of shaft axis: 80 mm -Design: B3 -Protection class: IP 55 -Dimensions: 310/160/H200 mm -Weight: 11.5 kg

electric motor, three-phase motor -Manufacturer: Elektromotorenerk Grünhain, electric motor type DOMA 80K2-BW33 -Power: 1.5 kW -Speed: 2860 rpm -Shaft: Ø 19 x 35 mm -Design: B5 -Protection class: IP 54 -Dimensions: 270/200/H230 mm -Weight: 11.4 kg

Key data: 5 mm, 6 mm, 4425 mm

Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132S/2 -Power: 5.5 kW -Speed: 2870 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Dimensions: 450/256/H310 mm -Weight: 43 kg

Combex 90 Strainer Extruder Manuf.: AZ / VMI Screw diam. 90mm LD ratio 10-1 AC motor 37kW 1475rpm Year 2010 Complete with Temperature Control Unit and Controls Full manual / documentation available

Corner milling machine, radius milling machine for machining the corner edges. Banding thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. pull-out workpiece support Dimensions: approx. 700 x 600 x 1300 mm Weight: Approx. 140 kg Suction nozzle: 70mm

electric motor, three-phase motor -Manufacturer: Euromotori, electric motor type ASA 200LB-2 -Power: 37 kW -Speed: 2960 rpm -Shaft: Ø 55 x 110 mm -Design: B3 Protection class: Ex -Dimensions: 825/396/H570 mm -Weight: 335 kg

electric motor, drive motor, engine -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

Levelling Elements - Machine Stand EFFBE - LevelMount - EFFBE LM 6 - 60 Maximum static load 3,200 kg Diameter 185 mm Height 45 mm Thread M 20 x 1.5 Leveling height 20 mm Weight 3.4 kg - 1 piece(s) in stock - new - Unit price

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet, EtherCAT Box Manufacturer: Beckhoff, EtherCAT Box -Type: EP2028-0001 -Voltage: 24 V -Number: 2 modules available Price: per piece -Dimensions: 130/30/H35 mm -Weight: 0.2 kg/pc.

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-400 -Stroke_ 400 mm -Shaft: Ø 20 mm -Dimensions: 630/60/120 mm -Weight: 6.6 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-300 -Stroke: 300 mm -Shaft: Ø 20 mm -Dimensions: 525/60/120 mm -Weight: 5.8 kg

Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...

pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

Sensor Module, Incremental Encoder, Encoder Relay Unit, Encoder Unit -Manufacturer: Keyence, Encoder Unit -Type: CA-EN100U -Dimensions: 130/55/H30 mm -Weight: 0.1 kg

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch -Manufacturer: Hirschmann, Ethernet Switch Rail Switch -Type: SPIDER 4TX/1FX EEC -Dimensions: 115/80/H25 mm -Weight: 0.1 kg

pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alloy powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packaging unit: 3.0 kg New ! Dimension ( packaging ): 85 x 85 x 230 mm

Gear Motor SEW-EURODRIVE RF40eDT71C 0.25 kW 85 rpm 220/380 V Explosion Proof New !' IP 54 shaft diameter: Ø14 mm Dimension: 440 x 220 x 160 mm

Sensor module, incremental encoder, encoder relay unit, encoder unit, signal converter -Manufacturer: Heidenhain, Encoder Unit -Type: EXE 605S/005-F -ID No.: 2 322-08 -Dimensions: 300/120/H55 mm -Weight: 0.8 kg

Extruder, co-rotating twin screw extruder, twin screw extruders, plastic injection molding machine -Engine power: 55 kW - Output: approx. 200 to 300 kg/h -Screw diameter: 51.7 mm -Speed: 60-400 rpm -Dimensions: 1250/4530/H1080 mm -Weight: 3000 kg

Fine filter, filter element, air filter -Manufacturer: Ultrafilter Ecoair OVP -Type: SMF 30/30 -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 86 x 775 mm -Weight: 1.4 kg

electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft diameter: 19 mm -Design: B14 Protection class: IP EX -Weight: 20 kg

electric motor, three-phase motor -Power: 0.75 kW -Speed: 1380 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 54 -Number: 2x motors available Price: per piece -Dimensions: 270/215/H160 mm -Weight: 12 kg

Heating elements control unit -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 95 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 1390 rpm -Shaft diameter: 24 mm -Design: B3 -Protection class: IP 54 -Weight: 13 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 890 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 54 -Weight: 11 kg

electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm -Shaft diameter: 14 mm -Design: B5 -Weight: 6 kg

three-phase motor, electric motor -Engine: unused -Power: 75 kW -Speed: 2955 rpm -Protection class: IP 23 -Type: B3-B5 -Shaft: Ø 60 mm -Number: 3x engines available -Price: per piece -Dimensions 900/560/H500 mm -Weight: 396 kg

electric motor, three-phase motor -Engine: unused -Power: 18.5 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 55 -Quantity: 6 pieces available -Price: per piece -Weight: 110 kg/piece

three-phase motor, electric motor -Condition: unused -Engine data: -Power: 75 kW -Speed: 2970 rpm -Voltage: 380-420 V (delta-star) -Protection class: IP54 -Type: B3-B5 -Shaft: Ø 65 mm -further data see photo type plate -Dimensions: 1030/770/H600 mm -Weight: 610 kg

electric motor, three-phase motor -Input: 415 volts -Power: 55 kW -Speed: 2950 rpm -Shaft diameter: 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 930/600/H610 mm -Weight: 380 kg

Electric motor VEM, ELMO type 1179.4 0.016 k W 2350 rpm 220 V AC IP20 Shaft diameter: Ø 6 mm New ! Dimensions 120 x 110 x 95 mm

Electric motor VEM, ELMO type 1179.4/2 0.025 k W 2800 rpm 220 / 380 V AC IP20 Shaft diameter: Ø 6 mm New ! Dimensions 120 x 110 x 97 mm

Electric motor VEM, ELMO type 1059.1/2 0.04 k W 2800 rpm 220 V AC IP00 Shaft diameter: Ø 9 mm Flange diameter: Ø 50 / 75 mm New !' Dimensions 143 x 90 x 75 mm

Three-phase electric motor SEW type. RX61DT71K-4 0.15 kW 1400 rpm 220 / 380 V shaft diameter: Ø 14 mm flange: Ø 160 mm used, tested ! Dimensions: 240 x 200 x 160 mm

Three-phase electric motor with brake and speedometer generator SEW KF67/R CV100L4/BMG/HR/TF/AV1H/IS ( KF67/RCV100L4/BMG/HR/TF/AV1H/IS ) 3000 rpm 103," 3 Hz 310 V IP 54 shaft diameter: Ø 22 mm flange: Ø 160 mm used, tested ! Dimensions: 600 x 300 x 210 mm

Three-phase electric motor with brake and speedometer generator SEW KAZ97/R CV100L4/BMG/HR/TF/AV1H/IS ( KAZ97/RCV100L4/BMG/HR/TF/AV1H/IS ) 3000 rpm 103,3 Hz 310 V IP 54 shaft diameter: Ø 24 mm flange: Ø 300 mm used, tested ! Dimensions: 600 x 300 x 210 mm

Three-phase electric motor with brake SEW type: KAZ87 DT90L4/BMG/HR/MM15 0.3 / 1.5 kW 280 / 1400 rpm 380 / 500 V speed adjustable with internal drive inverter ! MM15C-503-00 IP 54 shaft diameter: Ø 14 mm flange: Ø 250 mm Dimensions: 440 x 290 x 290 mm

Three-phase electric motor SEW DFR63M4 0.18 kW 1320 rpm 230 / 400 V IP 54 shaft diameter: 10 mm Flange diameter: 120 mm New ! Dimensions: 270 x 230 x 120 mm

Electric motor with brake SEW DV112M8/4/BMG/HR/TF/IS 1,000 2 / 2.2 kW 700 / 1440 rpm 400 V IP 55 Shaft diameter: Ø 28 mm Flange diameter: Ø 250 mm Bolt circle: mid-center 155mm Two speeds, new ! Dimensions: 490 x 320 x 250 mm

Electric motor with external fan SEW MFT71D8VS 0.4 kW 750 rpm 220 / 380 V IP54 Shaft diameter: 14 mm Flange diameter: 160 mm with external fan A2E170-AA11-65 46 W New !' Dimensions: 350 x 230 x 160 mm

Electric motor VEM, ELMO Type 1279.2/3 0.025 k W 2800 rpm 220 / 380 V AC IP20 shaft diameter: Ø 6 mm Flange diameter: Ø 32 / 62 mm New ! Dimensions 123 x 80 x 80 mm