mh 800 e used for sale

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 940 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 280/230/H200 mm -Weight: 14 kg

Selling Proposal  DESIGNATION REFERENCE QUANTITIES SIEMENS SIMATIC S7-300 PLC 1 SIEMENS SM321 4 I/O BOARD SIEMENS SM322 I/O BOARD 4 FUSE DISCONNECT SWITCH WOHNER LTS-2 3 FUSE DISCONNECT SWITCH WOHNER LTS-000 3 VOLTAGE REGULATOR ROWAN ELETTRONICA 310 S.C/6M 3 EMERSON SP 1406 25 DRIVE EMERSON SP 2401 2 DRIVE

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 365/280/H250 mm -Weight: 27 kg

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1500 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Flange: Ø 105 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 245/187/H140 mm -Weight: 6.5 kg

Electric motor, three-phase motor -Electric motor: for gear motor -Type gear motor: FA60MT80N80N1/HF -Speed: 750 rpm -Shaft: Ø 12x20 mm -Design: B5 -Protection class: IP 55 -Dimensions: 355/213/H160mm -Weight: 15kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: 22 mm -Design: B5 -Protection class: - -Price: per piece -Quantity: 1 available -Dimensions: 320/200/H225 mm -Weight: 17 kg

Three-phase motor, electric motor -Power: 1.35 kW -Speed: 1410 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP54 -Number: 3x available -Price: per piece -Dimensions: 385/205/H260 mm -Weight: 22 kg

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Electric surface press REITZ EHSP522 Pressing surface 200200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press

three-phase motor, electric motor -Power: 0.22/0.4 kW -Speed: 670/1400 rpm -Shaft: Ø 12 mm -Design: B5 -Protection class: IP 54 -Quantity: 1 piece available -Dimensions: 290/250/H255 mm -Weight: 15 kg

Plunge EDM CDM ROVELLA mod. Eldis 3.40 Features: X-axis: 400 mm. Y-axis: 300 mm. Z-axis: 200 mm. Table length: 650 mm. Table width: 400 mm. Weight: 1,400 kg.

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft diameter: 14 mm -Construction: B14G -Protection class: IP 54 -Number: 11x motors available -Price: per piece -Dimensions: 240/160/H185 mm -Weight: 6.2 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Brake: 220 V / 4 Nm -Construction: B3 -Protection class: IP 54 -Dimensions: 235/125/H170 mm -Weight: 4.9 kg

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable

From operating resolution: Pulse welding system Cebora EVO Speed Star 380 TC Specifications: Control Sound Digibox MIG P4 Welding range 10-380 amps 310Amps at 100% ED 4 Roller feed Water cooling TIG welding possible in the DC range Feed rollers 1.2mm Burner 4meter with 1.0mm wire, ground cable and pressure reducers-- Dimensions in mm approx. 950x850x1020 Operating instructions

Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer

Inv. Num. : 5805 Type:- Producer: EKOL Created: 2004 Parameters: Suitable for surface treatment of aluminium profiles with maximum dimensions of 3500 x 1350 x 600 mm Annual capacity: 20-25000 m2 Heating medium: Natural gas Equipment: KOS 2 x 6 x 20 Chamber Degreasing Machine Continuous dryer Transient 2 pieces Application cabin (suction capacity 10000 m3/h) Hardening furnace (4400 x 4400 x 3700 mm) Transport Demi-Water Production Wastewater Treatment Plant

Three-phase motor, electric motor -Power: 16 kW -Speed: 980 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/480/H400 mm -Weight: 223kg

Three-phase motor, electric motor -Power: 13 kW -Speed: 2930 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 570/410/H370 mm -Weight: 122 kg

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2870 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 8x engines available from Ecoair -Number: 24x motors available from AEG -Price: per piece -Dimensions: 370/277/H250 mm -Weight: 28 kg

Electric motor, three-phase motor -Motors: are unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 3x engines available -Price: per piece -Dimensions: 450/340/H300 -Weight: 50 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 9 mm -Construction: B34 -Protection class: IP 44 -Dimensions: 185/112/H145 mm -Weight: 3.5 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 3000 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 590/380/H380 mm -Weight: 116 kg

Electric motor, three-phase motor with 2 speeds -Power: 0.48/1.6 kW -Speed: 720/2880 rpm -Shaft: Ø 16 mm -Construction: B5 -Protection class: IP 44 -pole changing -Dimensions: 440/200/H260 mm -Weight: 36 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 600/360/H370 mm -Weight: 116 kg

Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg

Three-phase motor, electric motor -Engine: unused -Power: 30kW -Speed: 2940 rpm -Protection class: IP 23 - Type: B35 -Shaft: Ø 55 mm - Bolt circle: 350 mm -Number: 2x available -Price per piece -Dimensions: 720/500/H400 mm -Weight: 210kg

Three-phase motor with 2 speeds, electric motor -Motor: is unused -Power: 12.5/18.5 kW -Speed: 970/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -pole changing -Dimensions: 740/390/H450 mm -Weight: 148 kg

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2900 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 590/420/H380 mm -Weight: 88 kg

Three-phase motor, electric motor -Engine: is unused -Power: 45 kW -Speed: 2945 rpm -Shaft: Ø 60 mm -Height of shaft axis: 200 mm -Design: B35 -Protection class: IP 23 -Dimensions: 780/550/H460 mm -Weight: 250 kg

KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3

Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg

Automatic scale with ejector and roller transport max 40 kg for various max 300mm wide containers

Three-phase motor, electric motor -Power: 0.8 kW -Speed: 940 rpm -Shaft: Ø 22 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 400/195/H240 mm -Weight: 22 kg

Electric motor, three-phase motor -Power: 5.5kW -Speed: 1730 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 1 piece available -Dimensions: 420/340/H265 mm -Weight: 64kg

Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Power: 5.0 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 445/330/H250 mm -Weight: 60 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 945 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 415/283/H230 mm -Weight: 44 kg

Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg

electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 385/320/H265 mm -Weight: 41 kg

electric motor, three-phase motor -Power: 5 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Design: B5 -Protection rating: - Price: per piece -Quantity: 1 available -Dimensions: 440/360/H305 mm -Weight: 69 kg

electric motor, three-phase motor -Power: 6.8 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: EX -Dimensions: 490/340/H260 mm -Weight: 73 kg

Dear Ladies and Gentlemen, We hereby offer the following exhaust gas heat exchanger from Enkotherm. Year of construction 2020 New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de

Dear Ladies and Gentlemen, We hereby offer the following exhaust gas heat exchanger from Enkotherm. Year of construction 2012 Used, but with new tube bundles. So completely overhauled! Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de