mh 800 e used for sale

6-piece sedimentation oscillator with with stopwatches and accessories New condition, never used

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

Shock freezing evaporator EKO with 3 fans, type ESL 63.33.12Y, lamellar distance 12mm, defrost heater, fan diameter 630mm,

Blast Freezer, shock freezer EKO with 4 fans, type ESL 63.42.12D, lamellar distance 12mm, defrost heater, fan diameter 630mm

Explosion protection valve VENTEX-ESI-E single-acting, DN200, Type5-A/N/P3 vertical or horizontal installation Passive without control and external energy Approved and certified safety technology from Switzerland

Features • Condition: as good as new • Colour: galvanised • Dimensions: 875 x 1115 x 45 mm • Mesh size: 50 x 112 mm • Load: 500 kg per grid • For beam length 1800 mm: 2 pieces required • For beam length 2700 mm: 3 pieces required • For beam length 3600 mm: 4 pieces required Price € 16,- net excl. VAT From 1,000 pcs. € 12,- net per pc. • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Euro supports eco 350 - new Steel prop, galvanized • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight, 17.60kg • Reliable to use due to consistently high load capacity of at least 20kN according to EN 1065 • Easy height adjustment through hole numbering Europrop eco 350, new construction prop made of steel, galvanized - effortless loosening of the adjusting nut due to special thread geometry - less effort required due to low weight, 17.60kg - safe to use thanks to consistently high load-bearing capacity of at least 20kNto EN 1065 - - easy height adjustment thanks to hole numbering

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

BUTTER CHURN EGLI CAPACITY TANK : 1700 L CREAM CAPACITY : 850 L BUTTER OUTPUT : 425KG

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Output: P624236 60 hl/h

Electrode welding Manufacturer ESAB Type LHK350 Power 350 amps at 35% ED, 200 amps at 100% ED Power connection 400 Volt 20 Ampere Weight approx. 150kg Machine ready for demonstration under power. Shipping on Euro pallet possible.

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: 2700 mm high: 2256 mm weight of the machine ca.: 0,625 t dimensions: 1,71 x 0,8 x 1,96 m The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast that ensure high operational stability. Offering comfortable maneuverability and efficient and effective vertical stacking, this model is ideal for operations in tight spaces. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ex-proof submersible pump, Rexa PRO V05DA-224/EAD3X2-T0039-540-0, Wilo, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Due to unpackaged storage, there are storage marks (only on the paint surface – see photos). - Includes 10 m connection cable - Includes documentation Technical data: - Qmax 50m³/h, Hmax. 18.6m, - 400V 4.6 KW - approx. 55kg - We are not a specialist company for explosion-proof products and cannot take on the choice and testing process. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the p ...

Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.

Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers different "Rod Heads" for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 mL to 10 mL. 24-Rod Head: For sample volumes from 200 μL to 4 mL. 96-Rod Head: For sample volumes from 10 μL to 400  ...

Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. With dimensions as small as 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost any of your nucleic acid purification needs. Utilizing the proven M-PVA Magnetic Bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance • Optimized design to avoid cross-contamination • Sample volume from 10 μl - 10 ml • Throughput from 96 to 4000 samples per  ...

Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

weight max. in kg: 2000 kg tool adaptor: Kugelkopf stroke height: 200 mm battery: 24 V / 240 Ah weight: Batterie: 204 kg weight of the machine ca.: 320 + 204 Kg dimensions of the machine ca.: 1,1 x 1,2 x 1,4 m • Electric lift truck for roller carrier, • Battery, • Manufacturer HAWKER, type Perfect Plus, no. 5225080001, • Year of construction 2009, • Charger, • last UVV -check 01/2009 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Used Case Erector Ape Form 1.200 Hm B: Year: 2002 Condition: As Is Used Case Erector Ape Year: 2002 Speed Model: FORM 1200 HM B Type: Cold glue Nordson Gluer Safety protections Code: G 82 More details: https://bottlingscout.com

Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!

Gear motor, electric motor, electric gear motor -Speed: 1400 rpm -Power: 1.5 kW -Brake: 20.0 Nm -Shaft on both sides: Ø 14 x 20/19 x 40 mm -Protection class: IP54 -Dimensions: 430/200/H260 mm -Weight: 27 kg

Three-phase motor, electric motor -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B14 -Protection class: IP54 -Dimensions: 355/115/H150 mm -Weight: 15 kg

Three-phase motor, electric motor -Power: 2.7 kW -Speed: 1450 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Dimensions: 410/310/H240 mm -Weight: 36 kg

Absolute rotary encoders, encoders, rotary encoders, encoders -Manufacturer: TR Electronic, rotary encoder -Type: HE-65-M -Shaft: Ø 10 x 20 mm -Dimension: Ø 65 x 150 mm -Weight: 0.7 kg

Optical fiber, connection technology, EFO units, illuminator -Manufacturer: Fiberstars, EFO-1 1 Illuminator -Power: 68 W -Price: per piece -Number: 4 Stück -Dimensions: 340/510/H165 mm -Weight: 4.7 kg/piece

Lean emission controller for gas engines with cogeneration units, Motortech EMCon5 for sale, with original packaging

Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Three-phase motor, electric motor -Transfer: in the current condition as seen -Slight damage: on the fan housing -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B5 -Protection class: IP54 -Dimensions: 360/140/H150 mm -Weight: 16.7 kg

Three-phase motor with 2 speeds, electric motor -Power: 2.7/3.3 kW -Speed: 1420/2850 rpm -Design: B5 -pole-reversible -Protection class: IP 54 -Dimensions: 355/250/H200 mm -Weight: 27 kg

Industrial Ethernet switch, network switch, LAN switch, rail switch -Manufacturer: Avantech, EKI Switch -Type: EKI-2525-AE -Outputs: 5 -Voltage: 12-48 VDC -Dimensions: 100/35/H150 mm -Weight: 0.6 kg

Suction Nederman Jumbo Smoke Eater 501653 16 A 380 V Portable Suction 145 mm D Exhaust air 125 mm D

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type EAK 80.1/2-FK14 -Power: 0.4 kW -Speed: 2910 rpm -Shaft: Ø 19 mm -Construction: B3 -Number: 3x motor available -Price: per piece -Dimensions: 300/180/H210 mm -Weight: 9.5 kg/pc.

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

Electric motor, three-phase motor -Manufacturer: ATB, electric motor 132 M type ERY 7.5/4-75 S -Power: 6.8 kW -Speed: 1455 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Protection class: IP54 -Dimensions: 480/320/H265 mm -Weight: 72 kg

Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes -Emergency lighting with: charger and controller and batteries -Dimensions: 630/390/H260 mm -Weight: 25 kg

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

Side channel blowers See nameplate, All 8 are the same!

Edur multi-stage centrifugal pump, 15 cbm p.h., 7.5 bar, LBU404C120L Flow rate: 15 cbm/h Head/pressure: 75 m / 7.5 bar RPM: 2,900 KW / voltage: 4.4 / 400 V, motor 7.5 KW Suction side / discharge side: DN 65 flange 180 mm (flange with milk thread connection DN 65) / DN 40 flange 150 mm Type: Stationary, pump head in stainless steel, for liquids, Bauj. 2006 L 780 mm, W 290 mm, H 350 mm Type: LBU404C120L Manuf.: Edur-Pumpenfabrik Product number: 2023002

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)

3 x Mak 9M25 engines Available from stock 2850 Kw at 720 Rpm in good condition From our stock in Turkey

EMDE BFR 1500 Big-Bag Filling System with bag inflation system for the dust-free precise and reliable filling of big bags, max. load 1000 kg, electrics 400V/50Hz, power consumption 0.5 kW, capacity up to 40 big-bags per hour

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg