mh 800 e used for sale

feed pressure: 10.0 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15.0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 bar Effective free air delivery: 1.000 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 410 kg. total power requirement: 7.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 3.0 mm ST pre-bending capacity: 3.0 mm ST upper roll diameter: 170 mm lower roll diameter: 170 mm side roll diameter: 180 mm Control: konv. 0: 380 V total power requirement: 3.0 KW weight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Including digital position display - Manual bottom roll adjustment Via hand crank - Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch 2 butt ...

plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA The data for this ad was created with ModulMWS -  ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 13800 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...

sheet width: 3100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm distance between columns: 3100 mm no. of strokes: 18 Hub/min down holder: 14 Stück oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC CybTouch total power requirement: 11,0 kW weight: 6300 kg range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Ca ...

table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,5 U/min bore: 90,0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90,0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4,1 x 2,2 x 2,19 m -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including s ...

pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10.5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30.0 kW weight: 22064 kg Dimensions (HxWxD): 5350 x 2450 x 3150 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot ...

Height=0.85 m, Overall length= 0.7 m, Overall width= 0.7 m,

Thread rolling machine, ESCOFIER H20Z, 2-roll, 2 moving heads (in sync), 2 - 20 Ton rolling pressure, workpiece diameter: 75mm max., tool diameter: 140-200 mm, Max plunge width 160 mm, Shafts dia: 69.95, Swivelling: +/-6°,, New: 2003, under power in our warehouse, M i M u machine tools

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

bore capacity in steel (diameter): 60 mm arm length: 1600 mm workpiece height max.: ca. 1300 mm borehole diameter: in Stahl 80 mm borehole diameter: in Guss 100 mm threading in St 60: M55 mm spindle turning speed range: 29-1.450 U/min Spindle Speed: 12 Stück boring spindle: 100 mm morse taper: MK5 spindle stroke: 350 mm total power requirement: 7,5 kW weight of the machine ca.: 4.600 kg dimensions of the machine ca.: 2600x1100x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm bore capacity in cast iron GG 20: 70 mm arm length: 2000 mm morse taper: MK 5 Spindle Speed: 28-1.250 U/min. spindle stroke: 330 mm total power requirement: 8 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The 15 kW heating element in Tetra Pak systems is commonly used for heating liquids in processes such as pasteurization and sterilization. Here are some key details regarding this component:, Key Features of the 15 kW Heating Element:, - Power Rating: With a rating of 15 kW, this heating element is capable of providing significant thermal energy, making it suitable for processing large volumes of liquid quickly and efficiently., - Application: Primarily used in food and beverage processing, including pasteurizers, UHT (Ultra-High Temperature) systems, and other equipment where precise temperature control is crucial., - Material: Typically constructed from materials that are resistant to corrosion and can withstand high temperatures, ensuring durability and longevity in harsh processing conditions., - Heating Method: The heating element may employ methods such as conduction or convection  ...

Net weight= 313 kg,

Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 505 kg,

Machine name: Polymer dosing system Manufacturer: PRO-ENTEC Type: RM2 Year of Make: 1998 Conveying / Dosing of: Liquid Polymer Capacity: 2 - 30 L/h Control: Yes Dimensions: L 1,150 x W 600 x H 1,600 mm Curb weight: 100 kg Technical documentation: No Condition: Used Price: On request

Manufacturer: Ficep Model: 601 DE Excalibur Year of Manufacture: 2010 Condition: Used Technical Description - Horizontal drilling head with one spindle - Spindle motor power: 7.5 kW - Clamping device included - Number of spindles: 1 - Drilling diameter: 5 - 40 mm - Air pressure: 0.60 MPa - Power consumption: 13 kW/h - Workpiece length: 12,000 mm - Minimum workpiece size: 100 x 50 x 50 mm - Maximum workpiece size: 12,000 x 610 x 610 mm - Bed travel speed: 35 m/min - Spindle speed: 180 – 1500 rpm - Machine weight: 2000 t Find more here - / Contact us at -

A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible.

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 50 kg,

Manufacturer: Ficep Model: 601 DEE Excalibur Year of Manufacture: 2015 Air Pressure: 0.60 MPa Power Consumption: 13 kWh Length of Workpiece: 12,000 mm Minimum Workpiece Size: 100 × 50 × 50 mm Maximum Workpiece Size: 12,000 × 610 × 610 mm Maximum Punching Hole: 40.00 mm Bed Travel Speed: 35 m/min Spindle Speed: 1500 rpm (180–1500) Machine Weight: 2000 t Find more here - / Contact us at -

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra ch ...

length: 500 mm width: 500 mm height: 110 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable and 1 box of magnetic prisms The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of ...

length: 500 mm width: 500 mm height: 110 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 500 mm width: 500 mm height: 110 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 500 mm width: 500 mm height: 110 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1215 mm width: 500 mm height: 110 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

Inv. Num. : 8658 Type: AF 221 Producer: Elumatec Created: 1997 Parameters: Max Speed: 2800 1/min

Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ Advanta ...

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material color: RAL1007 yellow Box profile: 100 x 50 mm Truss Type: N100x50|SEG5 Agraffe: 5 hooks Clear width: 1,810 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Type: ES5000 Serial number: 176 Year of construction: 2008 Labels: 60.3 x 19.8 mm Printing range: 38 x 18 mm Printer: Kortho hotprinter Compressed air: 6 Bar, 0.2Nl/cycle Power: 230VAC, 50Hz, 2.2kW Dimensions: 550 x 600 x 1400 mm Weight: 80 kg In combination with FCA or ICA type clipper

Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife

length: 975 mm width: 410 mm height: 100 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable and 1 box of magnetic prisms The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of ...

length: 795 mm width: 500 mm height: 75 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 795 mm width: 500 mm height: 75 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 805 mm width: 510 mm height: 100 mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 500 mm width: 490 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable and 1 box of magnetic prisms The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 790 mm width: 500 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable and 1 box of magnetic prisms The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 975 mm width: 410 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 975 mm width: 410 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mm width: 500 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mm width: 500 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 975 mm width: 405 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 980 mm width: 330 mm height: 100 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 975 mm width: 405 mm height: 75 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Magnetic clamping plate electric with cable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Lathe CNC turning center with 2 spindles Emco Hyperturn 45 Year of manufacture 2018 Switch-on hours: 25,386 h Ready for operation (automatic mode): 17,035 h Production operation: 8,619 h Original price: 270.000,- € net Current leasing rate: 2,629 € Chip conveyor Bürener SPE 63/12-225 Year of construction 2018 Bar loading magazine TOP Automazioni ETL8-50 12-speed tool turret Powered tools on both turrets Y-axis Automation with EMCO bar feeders, swivel loaders or gantry loaders EMCONNECT - Digital Process Assistant (Sinumerik ONE) WORKSPACE Travel in X/Y/Z 160 (150)/70/510 mm Max. bar passage 45 (51) mm Max. turning diameter 300 mm Circumferential diameter over bed 430 mm Rapid traverse speed X/Y/Z 30/15/45 m/min MAIN SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. torque 100 Nm SUB-SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. t ...

Siemens SIMATIC ET200S decentralized peripherals with Profibus-DP Manufacturer: Siemens Type: ET200S (IM151-1 High Feature + Power Module + I/O Modules) Input: DC 24V Output: Digital inputs/outputs 24 V DC Weight: approx. 1.8–2.0 kg Price without VAT per piece: Country of origin: Germany Pieces: 1 Included Assemblies: 1× Interface Module IM151-1 High Feature (6ES7 151-1BA02-0AB0) 1× Power Module PM-E DC24V (6ES7 138-4CA01-0AA0) 2× Digital Input Modules DI 24V, 4 Inputs (6ES7 131-4BD01-0AA0) 2× Digital Output Modules DO 24V, 4 Outputs (6ES7 132-4BD32-0AA0) Multiple terminal modules for connection