mh 800 e used for sale

Electroplating test system for high flow / separation It does not have a control/transport cart and has not yet been used. That was our model system. It is a separator bath with 3 positions The positions are designed for vertical and horizontal arrival including a 25mm movement of goods. The buyer can view the system, and also dismantle it. High-performance test containers for ViaFill and AR 1:40 Features: - Aspect ratio up to 1:40 - Multifunctional system for panel & pattern plating, blind micro via plating, via filling plating, button and bridge plating - Suitable for flex circuit substrates up to 6.2 mm thick - Segmented anodes with 3 inert anodes per PCB - 372 slots for eductors with horizontal flow per PCB - Two-dimensional fabric movement in the copper cell The copper cell: Our copper cell is designed for PCBs from 18" x 25" to 21" x 24". Hydrodynamic conditions are gu ...

Calender consisting of: (Version: 2024-02) Manufacturer: Eduard Küsters Maschinenfabrik_Krefeld Thermobonding calender, type 413.50 YOC: 1985 Nominal width: 3700 mm Fabric width: 3500 mm / conversion to 3200 mm Total force: 555 kN Line force: 150 N/mm Production speed: 10-150 m/min Roller Equipment: 1 Küsters floating roller (S-roller) 1 Raculan 1 steel roller Non-binding information from the manufacturer. Technical documentation and electrical documents available Special feature: Heat exchanger included in scope of delivery. Electric heater no longer active, therefore conversion to heating via external thermal oil system (not included). Sale: as seen, without further warranty Condition: ready for use Find more here - / Contact us at -

Essemtec FLX2010 MKL Used assembly machine from Essemtec type: FLX2010 MKL with a vacuum table for assembly of "printed electronic" components. With vacuum pump and feeders. Voltage: 230V Current: 3A Find more here - / Contact us at -

2003 Reichenbacher Eco 1419 B CNC portal milling machine Year of construction 2003 Number of spindles: 8 drilling spindles Tool places: 12 Speed range: 1500-24000 rpm Find more here - / Contact us at -

2000 Sato Elektronik SATRONIK Flame cutting machine Find more here - / Contact us at -

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - / Contact us at -

Essemtec SP600 SMT stencil printer Find more here - / Contact us at -

Göpel Electronics Opticon Smartline The software dongle would have to be renewed at Göpel, which we can arrange Find more here - / Contact us at -

2014 EUROMAC MTX Punching machine Type: MTX Manufacturer: Euromac Year: 2014 Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60of which rotary ones - continuously 360° 30 Maximum punch diameter (size D) – separate 81 mm The maximum diameter of the punch in the magazine XMTE4M 4 x 31.7 mm The maximum diameter of the punch in the magazine XMTE6M 6 x 24.0 mm The maximum diameter of the punch in the magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in the Y axis (with Multitool) 1300 mm Working range in the Y axis (single tool) 1250 mm Working range in the X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic repositioning of clamps in the X axis up to 10,000 mm Max. positioning speed in the Y+X axis 80 m/min. Axis acceleration 10 m/sec² N ...

2019 Soft Energy Controls CES0007 Ranking machine End of line testing machine which sorts and grades cylindrical and prismatic battery cells. It is quite a specific piece of equipment, but it has some components that have value and could be repurposed in other machines. Originally from Japan. Main functions: DCIR testing and grading of cells Sorting of prismatic and cylindrical cells based on the cell grade into trays Find more here - / Contact us at -

2008 Shikoku Kakoki ELOPAK S-PS80HA & 2011 OYSTAR A+F Traypacker Elopak US80 filling line - filler - to packer Model: ELOPAK S-PS80HA Manufarcturer: Shikoku Kakoki Year: 2008 Applicator: 3x PLA-S30 Einpacker: OYSTAR A+F Traypacker Year of construction 2011 The machine has a capacity of 8,000 pkg/h Fruit juice and iced teas were bottled on this line in Diamond Curve 0.5 l, 0.75 l and 1 l gable-top packs Find more here - / Contact us at -

LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - / Contact us at -

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

Machine type : Flame cutting system Manufacturer: ESAB Model : SXE-P1 4500 RH Year of manufacture : 1999 Dimensions, Weights, and Power Supply: - Track Height: 500 mm - Track Length: 14,000 mm - Cutting Length: 12,000 mm - Cutting Thickness: 150 mm - Machine Height: 1,900 mm - Machine Length: 2,250 mm - Height of Cutting Table: 700 mm - Machine Width: 5,270 mm - Cutting Width: 3,000 mm - Maximum Machine Speed: 12,000 mm/min - Machine Weight: 2,500 kg - Maximum Number of Single Torches: 2 x 381 + 1 - Fuel Gas: Acetylene - Voltage: 230 V / 50 Hz - Power Consumption: 2 KVA Find more here - / Contact us at -

Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Find more here - / Contact us at -

Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -

CNC vertical lathe Type: VL 5i F Manufacturer: Emag Year: 2016 number of axes : 2 max clearance diameter : 250 mm max part diameter : 220 mm machining height : 175 mm strokes (X/Z) : 660 / 300 mm quick feed (X/Z) : 60 / 30 m/min turret number of positions : 12 tool-holder : VDI40 spindle power : 28 /18 kW speed : 0 to 4.500 rpm index precision C axis : 0,001° part magazine capacity diameter 30 to 85 mm : 37 pos.,max 4.5 kg part magazine capacity diameter 30 to 160 mm : 22 pos.,max 8 kg part magazine capacity diameter 80 to 220 mm : 16 pos.,max 10 kg part height max : 175 mm voltage : 400 V installed power : 36 kW dimensions floor space: 2266 x 4184 mm height : 3200 mm weight : 7.500 kg Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

Manufacturer: Elumatec Type: SLK118/00 Year of Manufacture: September 2008 Type of Machine: CNC Profile Milling Machine (Template-Free Copy Milling Machine) Find more here - / Contact us at -

IWKA/Netzsch/Laetus/Mettler Toledo Garvens/Skinetta complete tube filling & packing line for conical aluminium tubes comprising: IWKA TZK 200 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 16 to 45 mm and a maximum tube length of 235 mm, rod length up to 750 mm, compressed air 6 bar, capacity up to 200 tubes per minute IWKA TFS 30 tube filling & closing machine for double & three fold, tube diameter from 10 to 40 mm, tube length from 50 to 250 mm, filling volume from 1.5 to 350 ml. (with suitable dosing pumps), capacity up to 200 tubes per minute, includes Netzsch BEF200 barrel/drum emptying system, automatic transfer of the filled tubes into IWKA CPS-R horicontal cartoning machine, continuous motion, carton size range A (width): 16 – 80 mm, B (height): 25 – 125 mm, C (depth): 55 – 180 mm, GUK flat sheet leaflet folder, Laet ...

AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price!  ...

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

Full Gang Esterer Hdn 600 Passed 710 Stroke 600 Hydraulic Saw Spander Fully Hydraulic Chip Wagon Auxiliary Wagon Splitting Wedge Cape Saw

Hackeranlage hacker Rudnick Enners 500 200 motor 45kw 500mm 200mm vibrorynne detecktor metau scratch conveyor technology

engine: 2,8 KW weight of the machine ca.: 320 kg dimensions of the machine ca.: 86 x 90 x 85 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) EER: 3.02 Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Bitzer SQDS4010214-CE Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new

For sale is a Krones Ergomatic labeller in mint condition. The system can be used for large, small and small glass, as well as bottles. Top condition. Is given away inexpensively.

brinell hardness: . rockwell hardness: . throat: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017

Van Rietschoten & Houwens 430-301E Exhaust Gas Averager

Working hours ca 1000 !

FOAMplus EZ100 foam packaging system was built in 2014 in Germany by Storopack Deutschland GmbH + Co.KG. The machine is designed for the production of lightweight and durable protective packaging that effectively protect products during transport. These elements are produced directly at the packaging station by using polyurethane foam. STOROPACK FOAMplus produces the foam by mixing two chemical components. The chemical components A” and B” are taken from the barrels by means of two electric pumps and further transported by flexible hoses to the dispenser. After application, the material increases in volume by up to 250 times, precisely adapting to the shape of the product to be protected. The operation of the machine is managed by a microprocessor control system with an easy-to-read LCD display, which is responsible for controlling the most important parameters and ensuring safe oper ...

press capacity: 2250 kN quantity of oil: 400 l : DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Max. print width 745mm (750mm with register marks) - Material width: 760 mm - Non-Stop Martin Automation unwinder and rewinder - Fully servo driven - Speed 400 m/min - Water cooled - Chilled rollers - 6 x offset printing units - 2 x Flexo printing units - UV drying - Cold foil embossing - Inline laminating unit - Reverse printing (mirror-inverted printing) - Backside printing with 1-2 Colors - Minimum material thickness: 12my - Maximum material thickness: 600g/m2 - Materials that can be printed: paper, BOPP, PET and ALU - Min. actual thickness for foils and aluminum: 12my - Current production: Flexpack, aluminum composite (paper + aluminum) laminated; 12my PET films; Reverse printing (mirror-inverted printing)

FANUC O1 Machine length : 1350 mm Machine width : 2760 mm Machine height : 2615 mm Machine weight : 3500 kg Control unit: Enac-I Spindle speed range : 10000 1/min Spindle motor power : 7.5 kW X-axis travel : 500 mm Y-axis travel : 400 + 210 mm Travel of the Z-axis : 300 + 80 mm Maximum table load: 500 kg Table dimensions: 700 mm x 400 mm

: . : . : . Electric air purifier The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg