mf used for sale

Bread press VEB Habämfa â Product description âœ" Manufacturer: VEB “Habämfa âœ" Condition: used, bakery condition, not checked For details see pictures.  

Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

turning diameter over bed: 2100 mm turning diameter over slide rest: 1300 mm turning length: 6800 mm workpiece weight: 25000 kg main drive motor: 140 kW Control: Siemens type: 840 C faceplate: 1100 mm bed width: 2500 mm steady: 800 mm steady: 800 mm steady: 800 mm steady: 600 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

swing diameter: 436 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m It is a unit price. There are 6 pieces available. For crankshaft work. The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Doubled support carriage - CNC controlled measuring and correction probe - Chip conveyor - internal and external clamping jaws (wheel clamp in and out) - overhauling cost 850k EUR - Under power free 02.2026

- Rebuild in 2010 with SIEMENS TOUCH - Rebuild cost EUR 200.000 - Distance measuring device with double taster - Big package with pressing tools in several diameters

turning diameter: 2000 mm turning length: 5000 mm turning diameter over slide rest: 1050 mm turning diameter over bed: 2000 mm faceplate diameter max.: 1200 mm spindle turning speed range: 1,6 - 250 U/min main drive motor: 110 kW max. workpiece weight between centres: 25 t workpiece weight max.: 40 t centre height: 700 mm swing diameter max. over bed cover: 1140 mm max.workpiece weight:each extra steadyrest: 3000 kg total power requirement: 120 kW weight of the machine ca.: 55 t dimensions of the machine ca.: - m - Face Plate Ø 1200 mm - Coolant - Rapid travel - Tail stock mit Face Plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper

Impact crusher 8/4/3 S3 Infeed width 480 mm Inlet height 400 mm Maximum feed up to 250 mm hard rock Capacity up to 60 t/h depending on gap setting Drive power 45 - 90 kW The machine has completely new wear parts The rotor is overhauled with new blow bars Includes hydraulic power unit for swingarms and housing Basic machine with infeed hopper

Plate boring mill X/Y/Z 13200/3200/1400, built approx. 2010, rebuilt 2016 Siemens Sinumeric 840D with Siemens drives + Heidenhain linear measuring systems. Linear motors in X with cooling unit Delta Therm, Y/Z ball screw Control cabinet air-conditioned with Pfannenberg cooling unit Hydr. Weight compensation, manually adjustable swivel head SK50 Panel field approx. 12000x3500 With UNION rotary table 2000x1800, adjustment range 1250mm + various clamping angle accessories.

turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used Lifting Kneader HabämfaManufacturer: HabämfaWith stainless steel kettleFor max. 30 kg dough 20 kg flourKettle dimensions: 55x32cmWith 2 speedsWith protective lidCondition: Baker's conditionDetails see pictures

Used Lifting Kneader HabämfaProduct descriptionManufacturer: Habämfa Hallesche Maschinenfabrik GmbHMit 2 ALU Boiler Dimensions: Q 100cm Depth: 53cmDetails see pictures

Kneading machines Habämfa Boiler 113 cm Made of ALU We have several boilers in stock Boiler Inner dimensions B: 113cm H: 60cm Dimensions approx. W: 113cm H: 93cm Baker's condition Details see picture

- Producer Heesemann - Type MFA 8, Quer/Längs/Längs/Bürste - Year of construction 1998 - 1. Unit - Cross belt - Electronic sanding beam CSD - Fins belt - Belt speed 1. Stufe 0,6-12 m/s - 2. Stufe 24 m/s - Measure sanding belt 4800 x 150 mm - Motor power 11/17 kW - 2. Unit - Length belt - Electronic sanding beam CSD - Fins belt - Belt speed 3,5/10 m/s und 20 m/s - Measure sanding belt 2620 x 1350 mm - Motor power 4,5/12/17 kW - 3. Unit - Length belt - Electronic sanding beam CSD - Distance follower roller 32 mm - Dedusting brush 1 Stk. - Touchscreen with graphic design - Table length extension - Aggregate height adjustment - Electric height adjustment - Feed speed infinitely adjustable 3 - 15 m/min - Vacuum transport belt - Connecting piece 4x180 + 1x146 mm - Air speed main collector 20 m/s - Consumption of compressed air ~ 134,5 + 72,0 m³/h - Length 2.385 mm - Width 2.300 mm  ...

Machine Control AGIE, GHIELMETTI MFL-RACK CU ( MFL-RACKCU ) 637.804.6 GDS 100.10002.00/07 110 / 220 V AC spare part for AGIE CUT 300 ! used, tested !' Dimensions: 560 x 210 x 230 mm

DC motor VEM MFC 10041-902 ( MFC10041-902 ) TGL 29993 100 / 2730 rpm 17 / 160 V IP44 shaft: Ø 24 mm flange: Ø 200 mm Flange for tachogenerator: Ø 160 mm New ! Dimensions: 630 x 230 x 270 mm

Valve terminal FESTO 2x MFH-5/3-G-1/8-B 1x PRS-1/8-2-BB 30484 30542 3 - 10 bar Dimensions: 230 x 150 x 115 mm

Automatic lubrication, lubrication pump VOGEL MFE 5 / BW3 tank capacity 2.7 l motor: 70 W 220 / 380 V used ! Dimensions: 230 x 130 x 320 mm

Automatic lubrication, lubrication pump VOGEL MFE 5 / BW3 tank capacity 2.7 l motor: 70 W 220 / 380 V used ! Dimensions: 230 x 130 x 320 mm

SLA5800 Biotech - MFC - Digitally Controlled Mass Flow Controller for Gas, Mass Flow Controller Elastomer Sealed Mass Flow Controller, Flow Control, Flow Meter, Flow Controller, Thermal Mass FlowBROOKS INSTRUMENT Type SLA585081BAB1A2S1Ser. No. 01C00500222Year of construction 2020 (New / unused in original box)Series SLA5800 BiotechOption package Biotech Premium Packet Code TNetz connection 13.5 - 27 VDC (connector M8, 5 pin, male)Power consumption max. 10 wattsInterface PROFINET (2x RJ-45) Optical display 2

All-in-One BROTHER MFC-L8690CDW, Network, WiFi, 2 Paper Trays

Desktop All-in-One BROTHER MFC-L3710CW, SN: E79022-G8N153665, Network, Wi-Fi, Toner level: BK= 90% / C= 90% / M= 80% / Y= 70%, Total prints 5133 pages, (as of 17/07/24)

All-in-One BROTHER MFC-L8690CDW, Network, WiFi, 2 Paper Trays

Desktop multifunction device BROTHER MFC-L9570CDW, SN: E77450-G2F863025, toner level: BK= 65% / C=80% / M= 100% / Y= 1005, total number of pages 10227 pages, (as of 17.07.24), with undersink

Tabletop all-in-one BROTHER MFC-9332CDW, out of service

All-in-one BROTHER MFC-L8690CDW, network, WiFi

Tabletop multifunction device BROTHER MFC-L9570CDW, nameplate not visible

All-in-one BROTHER MFC-J5345DW, Network, WiFi

Desktop multifunction device BROTHER MFC-L8690CDW, SN: E77437-H0F547606, network, WiFi, 2 paper trays, toner level: BK= approx. 60% / C= approx. 40% / M= approx. 10% / Y= approx. 80%, total prints 40204 pages (as of 17.07.24)

Massey Ferguson MF30 combine harvester from 1998, produced by Dronningborg Industries A/S, equipped with cab, GPS system, mechanical gearbox and walker threshing system. Motor power 114 kW, max. speed 15 km/h, reading hours 2359, tyres front 30.5 LR 32 and rear 400/60-26.5, own weight 1700 kg, dimensions 6000 × 2500 mm, serial number 55161, registration TFR-84-Z. Auction-ID: A1-40133-21

Connected load: 0.77 kW

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Auction-ID: A7-45252-15

Auction-ID: A1-45411-564

1.1 kW

Plymovent mobile extraction system for the extraction of welding fumes and fumes. Ideal for workshops, garages or industrial applications.

• Edgebander • Serial number 14589/9-810 • Total installed power approx, 9 KW • Edge thickness from 0,40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0,75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0,22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0,60 KW-9000 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-23

• Lot of 2 electronic sectioned sanding pads with 56 sectors for wide belt sander • Dimensions of each unit: approx, 1600 x 150 x 260 mm • Sanding pad length  approx, 1500 mm • They include the control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-199

• Electronic sectioned sanding pad with 56 sectors for wide belt sander • Dimensions of the unit: approx, 1600 x 150 x 260 mm • Sanding pad length approx, 1500 mm • It includes 2 control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-204

Dim. approx. hxbxd 123x60x65 cm. Auction-ID: A1-44654-260