mf used for sale

Manufacturer: Friz, Year: 1997, Type: MFP 22/14/11, Press length mm: 1100, Pressing width mm: 800, Work piece thickness max mm: 95, Year :1997

Manufacturer: Indramat Motor Y-Achs Antrieb Weeke/Homag<CRLF>, Type: MDD071B-N-040-N2S-095GA0/7P010-MF1-10-040-000, Maschinennummer: MDD071-17390, Motor torque Nm: 4.40/6.60, IdN A: 11.00/16.60, pm: 4000/6000,

Manufacturer: Heesemann, Type: MFA 6, Year: 2011, Control: PC, Monting of the machine: Quer/Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 2150 X 1350, Steel roller: kombi, Belt 1Transverse sanding unit: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: yes, Brushing unit: yes, FREE TEXT: vakuumteppich/Zustand sehr gut, Year :2011

Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Manufacturer: Heesemann, Type: MFA 6 Impression, Year: 2008, Control: Längs/Stahlwalze/ Bürste, Monting of the machine: 1300, Double sided sanding line: 3 - 140, Sanding width mm: 1, Sanding hight mm: 2620 x 1350, Number of sanding belts: 0,5 - 12, Konstantentisch: Konstatntentisch, Bürstenaggregate: CSD , Rubber roller: 16, Band 1 Leistung kW : 15, Konstantentisch: Konstatntentisch, Band 2 Leistung kW : 5 - 25, Belt 2 shoe unit: 3, Band 2 Queraggregat: yes, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Kombiaggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 1,5 kW, Year :2008

x-travel: 10000 mm y-travel: 1100 mm z-travel: 1700 mm Control: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mm chip conveyor: universal head: table height over floor: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Magnetic valve -PN: 3-10 bar -Price: per piece -Number: 10x available -Weight: 0.3 kg

Hydraulic motor, oil motor, hydraulic pump -Model type: MF100 -Toothed shaft holder: Ø 40 mm -Number: 2x available -Price: per piece -Dimensions: 430/240/200 mm -Weight: 50 kg/piece

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump -Manufacturer: Vogel, OIL- central lubrication pump Oil discharge pump -Type: MFE 5 Content: 2.7 l -Flow rate: 0.5 l/min / 20 bar -Dimensions: 360/145/H370 mm -Weight: 7.4 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, directional valve -Magnetic valve -Type: 10897 MFH-5/3E-1/4-D-1 -Working pressure: 3.5-10 bar -Number: 8x valves available -Price: per piece -Dimensions: 165/90/H40 mm -Weight: 0.6 kg/piece

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos (one is missing) -Sign height: approx. 1100 mm -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Festo -Type: MFH-5/2-D-2-FR C -Magnetic valve -PN: 3-10 bar -Number: 1x valve available -Price: per piece -Weight: 0.62 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -Transport dimensions: 3200/1900/H1690 mm -Weight: 924 kg

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

Alfa Laval Plate Heat Exchanger M15-MFM heat exchanger from 2007, complete (closed model), 1 available. 94 L, 10 bar Manufacturer: Alfa Laval Model No.: M15-MFM Type: Plate Heat Exchanger Serial Number: 30106-27946 Capacity [L]: 94 Pressure [bar]: 10

Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type

mobile welding smoke filter, welding smoke extraction -portable -Extraction connection: 1 -Drive: 1 kW -Volume flow: max. 170 m³/h -Number: 1x available -Weight: 20 kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 36800 € : 747.04 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, b ...

: neu : 2023 : 8298 : prompt, Zwischenverkauf v : Türkei : 42730 € : 867.42 € : 1 : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 3800 mm : 2350 mm : 1650 mm : 2500 kg : 1000 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s Grafic control 2D -15,6", touchscreen controller on swivel arm - LBL editor: tabular programming by entering the axes values - 2D part editor: programming by drawing in graphic mode and 2D visualisation - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - autorisiation with password - 128GB HDD allows almost unlimited data storage - detailled alarm, tool and paramter page back gauge 1000 mm with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters upper tool in one pice, 20° manual height ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 35000 € : 710.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 0,75+1,1 kW : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the ...

Valve islands, multi-pin connection, directional valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island MFH -Solenoid valve: Type 10389 MFHE-3-1/4 1 piece -Solenoid valves: Type: 6211 MFH-5-1/4 6 pieces -Individual components: see photos -Quantity: 2x valve island available -Price/Levy: per unit -Dimensions: 320/260/H230 mm -Weight: 5.3 kg

Automatic controller Controlled by PC Main drive Spindle speed range 18000 This RAPID MFC EVOLUTION II universal machining center was manufactured in 2009. It is equipped with a computer-controlled control unit. The spindle speed is 18,000 rpm.

Pallets Carousel for Double Wall (Twin Wall) and Filigree Floor Production, MFA M24514 Manufacturer: Vollert, Nuspl, Weckenmann, EBAWE, Filzmoser, RATEC, Unitechnik, SAA Year of construction: 2020, 2019, 2017, 2003, 1991 Control system : Siemens S7, Unitechnik Products: Twin Walls (max. height 3.0m), Filigree Floor Slabs PALLET CIRCULATION Pallets: 10.60m x 3.08m, 48 pieces STRIPPING AND LIFTING Hydraulic tilting station (EBAWE company, renewed in 2017) Lifting device for shell 1 + floor element (Weckenmann) CLEANING, PLOTTING, ROBOT-SHUTTERING AND OILING Automatic pallet cleaner, plotter, shuttering robot (Weckenmann, renewed in 2020 and 2003) STEEL REINFORCEMENT, ROBOT, WIRES, FILIGREE GIRDERS Automatic longitudinal and cross wire machine, diameter 6-14 mm, lattice girder preparation, Automatic insertion robot for laying all bars, as well as the lattice girders  ...

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

General SKU317T817 LocationBarneveld MakeHosokawa Micron Type45-MFR-44 No.6031401000 Year of construction1996 Main Features MaterialStainless steel Volume4500 Ltr. Motor10 KW Specified Features - Conical mixer Conical mixercheck Capacity4500 Ltr. (4000 Ltr.) Largest cone diameter2600 mm Cone height3500 mm Manholedia. 450 mm Top drivecheck Motor10 kW 380 Volt Bottom bearing pintle bearingcheck (missing) MaterialStainless steel Information Floor space2,6x2,6 m Total height3,5 mMinerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmaceuticsConfectioneryOther feedAnimal feedOther chemicalStarchFine chemicalsSugarCosmeticsOther pharmaceuticsGeneric medicinesPowdered foodsConical mixersPaints & coatingsFeed additivesHosokawa NautaIndustries > Chemical > Minerals & inorganicIndustries > Chemical > Plastic & polymersIndustries > Chemical > Dyes & pigmentsIndustri ...

General SKU403S960 LocationBarneveld MakeAlfa Laval TypeTS6-MFG No.30110-16425 Year of construction2017 Pressure Working pressure8 Bar Main Features MaterialStainless steel Surface0.9 m2 Size length328 mm Sizes width508 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Heating surface0,9 m2 Capacity2,5 ltr / 2,96 ltr Number of platens12 Plate sizes326x508 mm ConnectionsDN 65 (4x) Max. temperature140 degr. C Information Total height0,7 Weight200 Kg Floorspace0,7x0,4 M Extra Specificationsincluding 1 spare end plate and 3 spare intermediate plates. material sealing: EPDM checkUNUSED Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU403S961 LocationBarneveld MakeAlfa Laval (SE) TypeM6-MFG No.30110-16416 Year of construction2017 Pressure Working pressure7 Bar Main Features MaterialStainless steel Surface2.2 m2 Size length750 mm Sizes width250 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Heating surface2,2 m2 Capacity3,6 ltr / 4,03 ltr Number of platens18 Plate sizes250x750mm ConnectionsDN50 (4x) Max. temperature100 degr. C Information Total height0,95 M Weight170 Kg Floorspace0,75x0,35 M Extra Specificationsincluding 1 spare end plate and 3 spare intermediate plates. material sealing: EPDM checkUNUSED Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinat ...

General SKU043R200 LocationBarneveld MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88, Material hastelloy Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Miscellaneous Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Information Floorspace1,7x0,7 M Total height1,2 M Weight800 KgMiscellaneous MillsEngelsmannMills > Miscellaneous MillsBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Type: SMW MFG-250 FWB 250/424 -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 125/95/H85 mm -Total weight: 4.5 kg

The tractor has 16,133 engine hours. When the tractor had just over 10,000 engine hours, the engine was replaced and a new one was installed.

Two-way hydraulic bending machine, with CNC numerical control, with two bending jaws and deflection compensation (bombing). Upper instruments segmented. Year of manufacture 11/2008. These are two separate devices: a) material loading, b) double-sided bending machine with a table for feeding material incl. its rotation options. The machine was put into operation in 2009 and was only used for about half a year. It is possible to buy the bending machine itself, or just with the serving table. Bending capacities: material width: 2,500 mm thickness: max. 8 mm (material up to 400 N/mm2) edges with minimum height = up to 6 times the strength of the board minimum radius = up to 1.5 times the strength of the board.

- 49 Positions - Simple spray treatment - With water filtration unit - Machine in perfect condition

For sale twist-off production line with knurling/lining machine CEPEDA MF 8 E. Perfect working condition. Speed 200-250 cpm.

Vibratory feeder, vibratory feeder, vibratory feeder, feeder, automatic feeder hopper, spiral feeder -Handover: in current condition as seen -Condition/add-on parts: see photos -Manufacturer: Oku automatic, spiral conveyor vibration feeder with frequency control -Type: VZ 1000 SR -Frequency converter: Müller Kurtz MFS 168 -Work basin: Ø 670 mm -Outlet width: 300 mm -Work basin height: 245 mm -Shelve conveyor: elastically mounted -Connection: 230 volts -Transport dimensions: 1070/810/H730 mm -Total weight: 293 kg

Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

used blower, Herbold MFT 8/280 Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.

used blower, Herbold MFT 55/500 11kW Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.

: 0,4-5 mm Workingpiece thickness from to: 6-45 mm Total length: 2680 mm Feed speed: 5 m/min. total power requirement: kw Weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

This 3-Axis 3D printer was manufactured in 2022 and is available immediately. Featuring SLS printing technology, the XYZ MfgPro230 xS offers a generous print volume of 230 x 230 x 230 mm. With a 30W CO2 laser, it ensures precise layer thickness options of 0.08 mm, 0.1 mm, 0.15 mm, or 0.2 mm. Equipped with XYZprint AMSLS software and Windows 10 OS, it supports .stl and .3mf file formats. For those seeking reliable additive manufacturing, consider this XYZ MfgPro230 xS. For more details, contact us.

: gebraucht : 2011 : 9728 : prompt, Zwischenverkauf v : China : 450 € : 1 : 100 mm : 3 mm : 90 ° : 95 kg manual Notching machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Max. machining width 1350 mm Min. machining thickness 3 mm Tipologia Sanding and Finishing Working Table Fixed pass height Vacuum feed belt yes No. Operating units 3 Nr sectioned swab yes Max. machining width 1350 mm Min. machining thickness 3 mm Max. machining thickness 150 mm Work table yes height fixed for line operation Forward feed belt yes with speed adjustment by NC yes max. forward feed speed 15 m/min Fan for belt vacuum hold down yes no. fans 1 Operating units 3 OPERATING UNITS 1 Unit : pad Pad : vertical Segmented pad : yes Automatic timed intervention : yes with adjustable speed by NC : yes motor power : 15 KW sanding belt width : 1400 sanding belt extension : 2620 OPERATING UNITS 2 Unit : pad Pad : vertical Segmented pad : yes Automatic timed intervention : yes motor power : 15 KW sanding belt width : 1400 sanding belt extension : 2620 OPERATING UNITS 3 Unit : br ...

Description: well maintained and powerful wide-belt sander with technical specs as follows: sanding width 1350 mm workpiece thickness 3 - 160 mm feed speed 3 - 15 m/min (frequency controlled) vacuum feed-belt cross sanding unit 15 kW, belt speed 2,0 - 20 m/s (frequency controlled), dimensions of sanding belt 4800 x 150 mm length sanding unit 15 kW, belt speed 1,8 - 18 m/s (frequency controlled), ,dimensions of sanding belt 2620 x 1400 mm length sanding unit , with pressure lamella belt 15 kW, belt speed 1,8 - 18 m/s without pressure lamella belt and 1,8 - 9 m/s with pressure lamella belt, ,dimensions of sanding belt 2620 x 1400 mm pressure beam with computer controlled selctive pressure control system (CSD) with stepless pressure adjustment of the single pressing elements. Distance of the rolls 16 mm structure brush 11 kW, diameter 250 mm, oscillating cleaning brus ...

Description: • Edgebander • Serial number 14589/9-810 • Total installed power approx. 9 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0.75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0.22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0.60 KW-9000 rpm Approx. Onsite Dimension. (l x w x h): 4,000 x 1,450 x 1,250 mm, weight approx.: 1,000 kg

Description: • Lot of 3 motors for wide belt sander • It includes: • 1 x SIEMENS motor: power 2.20 KW-1420 rpm with gear motor and integrated frequency converter • 1 x UNIVERSAL MOTORS motor: power 1.50 KW-1425 rpm • 1 x SIEMENS motor: power 0.75 KW-1395 rpm with gear motor Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 450 mm, weight approx.: 200 kg

Description: • Lot of 3 motors for wide belt sander • It includes: • 1 x SIEMENS motor: power 3 KW-1420 rpm with gear motor and integrated frequency converter • 1 x ALREN motor: power 1.50 KW-1400 rpm • 1 x SIEMENS motor: power 0.75 KW-1395 rpm with gear motor Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 450 mm, weight approx.: 200 kg

Description: • Cleaning brush unit for wide belt sander • Brush length approx. 1400 mm • Roller diameter 240 mm • Motor power 4 KW-1440 rpm Approx. Onsite Dimension. (l x w x h): 1,900 x 420 x 950 mm, weight approx.: 200 kg