mf used for sale

This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information.

Number of sanding units: 4 st. sanding width: 1.300 mm Sanding height max.: ca. 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300x500x450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range of 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for more information about this machine.

turning diameter: 550 - 1100 mm clamping length: 1650 - 2400 mm guage width: 1435 mm motor power: 60 (each Chuck) kw spindle turning speed range: 9 - 180 U/min workpiece weight: 3500 kg total power requirement: 228 kVA weight of the machine ca.: 54 t dimensions of the machine ca.: 7,9 x 3,55 x 3,4 m The Hegenscheidt-MFD portal wheel lathe is a wheel lathe that is easy to operate and maintain. Its portal design allows for wheel sets to roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² per tool post. This allows for a short floor-to-floor time for re-profiling, even for extreme wheel wear conditions. Mounted to each side of the portal type bed are the headstocks, with integrated drivers, centers and a main drive system fitted to each headstock. Both headstocks are movable for ease of the load and unload functio ...

This 4-axis Exeron EDM 310 MF20 was manufactured in 2006. Ideal for precision die-sinking applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 310 MF20 machine we have for sale. Contact us for more information.

used Lifting Kneader HabämfaManufacturer: HabämfaWith stainless steel kettleFor max. 30 kg dough 20 kg flourKettle dimensions: 55x32cmWith 2 speedsWith protective lidCondition: Baker's conditionDetails see pictures

This 3s HP 580 MFG COLOR was manufactured in 2019. It features a build volume of approximately 332 × 190 × 248 mm and a printhead resolution of 1200 dpi. With a build speed of up to 1,817 cm³/hour, it utilizes PA12 nylon for full-color capabilities. If you are looking to get high-quality 3D printing capabilities, consider the HP 580 MFG COLOR machine we have for sale. Contact us for further details.

Used Lifting Kneader HabämfaProduct descriptionManufacturer: Habämfa Hallesche Maschinenfabrik GmbHMit 2 ALU Boiler Dimensions: Q 100cm Depth: 53cmDetails see pictures

Used Used Rinser Perrier MFL 28/7: Year: 1996 Condition: Good Used Rinser Perrier MFL 28/7: Model: MFL 28/7 Year: 1996 Speed: 8.500 BPH Direction: Clockwise Number of clamps: 28 Electric carousel height adjustment Suitable for glass bottle Fixed nozzle 1 treatment Recirculation tank included Measurements of the diameters of the bottles processed: ? 61 mm; ? 66 mm; ? 76.1 mm; ? 77.6 mm; ? 80.3 mm; ? 82.4 mm; ? 88 mm; ? 88.4 mm; ? 106.5 mm Safety protections Code: UW 212 More details: https://bottlingscout.com

Bread press VEB Habämfa â Product description âœ" Manufacturer: VEB “Habämfa âœ" Condition: used, bakery condition, not checked For details see pictures.  

Spiral mixer Habämfa Extendable boiler 2 pieces we have in stock extendable with 2 boiler ( we have several boilers in stock ) Boiler• Inner dimensions of the boiler: W: 113cm, H: 60cm Kettle• Total dimensions: approx. W: 113cm H: 93cm Kettle made of ALU Kneading arm ALU for approx. 300kg dough 380 Volt 50 Hz Baker's condition Details see picture

Kneading machines Habämfa Boiler 113 cm Made of ALU We have several boilers in stock Boiler Inner dimensions B: 113cm H: 60cm Dimensions approx. W: 113cm H: 93cm Baker's condition Details see picture

Working width: 1.350 mm Number of sanding units: 2 st. Workpiece thickness max.: 150 mm Multi-purpose surface sanding machine Heesemann type MFA 6 Impression Q2 - LF for precise surface, veneer, lacquer and intermediate sanding in woodworking. The machine is suitable for solid wood, coated workpieces and sensitive surfaces in furniture and interior finishing. The infinitely variable feed rate and vacuum clamping ensure a clean and even sanding pattern. Available from week 33/2026 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper blade, condition as shown in photos (one is missing) -Sign height: approx. 1100 mm -Conversion to three-point linkage for tractors or forklift pockets for forklifts and wheel loaders is possible for an additional charge. -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -A conversion to a three-point attachment for tractors or drive-in pockets for forklifts and wheel loaders is possible for an additional charge -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg

Valve islands, multi-pin connection, directional valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island MFH -Solenoid valve: Type 10389 MFHE-3-1/4 1 piece -Solenoid valves: Type: 6211 MFH-5-1/4 6 pieces -Individual components: see photos -Quantity: 2x valve island available -Price/Levy: per unit -Dimensions: 320/260/H230 mm -Weight: 5.3 kg

Vibration conveyor, vibratory conveyor, vibration feeder, feeding device, storage container with automatic feeding, spiral conveyor -Manufacturer: Oku Automatik, spiral conveyor vibration feeder with frequency control -Type: VZ 1000 SR -Frequency converter: Müller Kurtz MFS 168 -Work basin: Ø 670 mm -Outlet width: 300 mm -Work basin height: 245 mm -Screw conveyor: elastically mounted -Connection: 230 volts -Transport dimensions: 1070/810/H730 mm -Total weight: 293 kg

Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump -Manufacturer: Vogel, oil central lubrication pump from milling machine Deckel FP4L -Type: MFE 5/S3 -Motor: Type DM 6 60 W -Dimensions: 185/130/H250mm -Total weight: 5 kg

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump -Manufacturer: Vogel, OIL central lubrication pump oil inlet pump -Type: MFE 5/BW 7 -Container capacity: 6 l -Flow rate: 0.5 l/min / 20 bar -Dimensions: 360/145/H370 mm -Weight: 9.5 kg

Manufacturer: Heesemann, Type: MFA 6 Impression, Year: 2008, Control: Längs/Stahlwalze/ Bürste, Monting of the machine: 1300, Double sided sanding line: 3 - 140, Sanding width mm: 1, Sanding hight mm: 2620 x 1350, Number of sanding belts: 0,5 - 12, Konstantentisch: Konstatntentisch, Bürstenaggregate: CSD , Rubber roller: 16, Band 1 Leistung kW : 15, Konstantentisch: Konstatntentisch, Band 2 Leistung kW : 5 - 25, Belt 2 shoe unit: 3, Band 2 Queraggregat: yes, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Kombiaggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 1,5 kW, Year :2008

Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996

Manufacturer: Heesemann, Type: MFA 6, Year: 2011, Control: PC, Monting of the machine: Quer/Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 2150 X 1350, Steel roller: kombi, Belt 1Transverse sanding unit: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: yes, Brushing unit: yes, FREE TEXT: vakuumteppich/Zustand sehr gut, Year :2011

Fine sanding machine Working width: 1300 mm. Workpiece thickness: 3-140 mm N? of units: 2 Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 18,5 kW motor,0,5-12 m/s belt speed with freq. Controlls, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 15 kW motor, 0,5-12 m/s belt speed with freq. Controlls, belt cleaning Brush cleaning unit scotch bride 250 mm diameter, 4 kW Brush cleaning unit 150 mm diameter, 1,5 kW Feedbelt speed 5 - 25 m/min, 1,5 kW motor, frequency control Working height 930 mm +/- 20 mm Carpet cleaning brush EA dedusting machine high-pressure blow-off system with rotating nozzles and ionization for statically charged dust

This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator.

- incl. Chip conveyor - incl. Chip crusher - Under power with  - incl. spare rollers - Power on hours  23.000 H - Working hours ca 8.000 H

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) Information Floor space1,7x0,7 m Total height1,2 m Weight800 KgDiscountHammer MillsEngelsmannDiscountMills > Hammer MillsBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Model: MFK 16045 Type: Edge milling machine Year of Manufacture: 2017 Find more here - / Contact us at -

Holder Metabo for Flex 230 mm Length 0.5m Width 0.5 m Height 1.30 m

Max. machining length: 2,600 mm Y-axis travel: 315 mm Travel Z-axis: 230 mm Speed of milling spindle infinitely adjustable between 2,800 and 12,000 rpm Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping X and Y-axis CNC controlled, Z-axis infinitely adjustable motorized 4 pneumatic material tensioners Manual tool change Minimum quantity spraying device USB port Instruction manual

Press force: 1800kN, stroke: 300mm, strip width: 80-400mm, max. coil weight: 3t, system operating pressure: 250bar, pump drive power: 15kW. An inspection on site is possible.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55300 € : 1045.17 € : 2550 mm : 2.5 mm : 1.5 mm : 3.5 mm : Motorisch : 3830 mm : 2200 mm : 1900 mm : 4050 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball roller ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36800 € : 702.88 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : Motorisch : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bo ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53600 € : 1013.04 € : 2050 mm : 3 mm : 2 mm : 4 mm : Motorisch : 3350 mm : 2200 mm : 1900 mm : 3800 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in t ...

: gebraucht : 2012 : 9690F : prompt, Zwischenverkauf v : China : 690 € : 1 : 100 mm : 3 mm : 90 ° : 90 kg Adjustable stops on both sides Finger guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 668.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 155 ° : 110 mm : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the b ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57100 € : 1079.19 € : 3200 mm : 2 mm : 1.2 mm : 3 mm : Motorisch : 4450 mm : 2200 mm : 1900 mm : 4500 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

Connected load: 0.77 kW

Machine Control AGIE, GHIELMETTI MFL-RACK CU ( MFL-RACKCU ) 637.804.6 GDS 100.10002.00/07 110 / 220 V AC spare part for AGIE CUT 300 ! used, tested !' Dimensions: 560 x 210 x 230 mm

Valve terminal FESTO 2x MFH-5/3-G-1/8-B 1x PRS-1/8-2-BB 30484 30542 3 - 10 bar Dimensions: 230 x 150 x 115 mm

DC motor VEM MFC 10041-902 ( MFC10041-902 ) TGL 29993 100 / 2730 rpm 17 / 160 V IP44 shaft: Ø 24 mm flange: Ø 200 mm Flange for tachogenerator: Ø 160 mm New ! Dimensions: 630 x 230 x 270 mm

Automatic lubrication, lubrication pump VOGEL MFE 5 / BW3 tank capacity 2.7 l motor: 70 W 220 / 380 V used ! Dimensions: 230 x 130 x 320 mm

Automatic lubrication, lubrication pump VOGEL MFE 5 / BW3 tank capacity 2.7 l motor: 70 W 220 / 380 V used ! Dimensions: 230 x 130 x 320 mm

SLA5800 Biotech - MFC - Digitally Controlled Mass Flow Controller for Gas, Mass Flow Controller Elastomer Sealed Mass Flow Controller, Flow Control, Flow Meter, Flow Controller, Thermal Mass FlowBROOKS INSTRUMENT Type SLA585081BAB1A2S1Ser. No. 01C00500222Year of construction 2020 (New / unused in original box)Series SLA5800 BiotechOption package Biotech Premium Packet Code TNetz connection 13.5 - 27 VDC (connector M8, 5 pin, male)Power consumption max. 10 wattsInterface PROFINET (2x RJ-45) Optical display 2

Unaudited Auction-ID: A7-46661-27

Error message Auction-ID: A1-46873-122

Auction-ID: A1-41277-63

Auction-ID: A1-47154-46