metal sheet used for sale

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm -Weight: 35 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IP 10 with swiveling support ring -Clamping range: 0 - 50 mm -Load capacity: 6 t -Number: 8 terminals available -Price: per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUNZ with swiveling support ring -Clamping range: 0-32 mm -Load capacity: 6 t -Number: 23 terminals available -Price: per piece -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUN with swiveling support ring -Clamping range: 0-40 mm -Load capacity: 9 t -Number: 7 terminals available -Price: per piece -Dimensions: 300/110/H470 mm -Weight: 28 kg/pc.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IP N with swiveling support ring -Clamp range: 0-40 mm -Load capacity: 6 t -Number: 6x clamps available -Price per piece -Dimensions: 280/100/H460 mm -Weight: 26 kg/pc.

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 20-40 mm -Load capacity: 12 t -Quantity: 2x clamps available -Dimensions: 330/90/H365 mm -Weight: 48 kg/pc.

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available -Dimensions: 275/80/H300 mm -Weight: 30 kg

beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SGK -Grip width: 1-75 mm -Load capacity: 2500 kg -Dimensions: 300/150/H390 mm -Weight: 17 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal clamp: Safety lifting clamp with swiveling support ring -Type: 3TSEVLA x 06T 1 28A -Clamping range: 0-35 mm -Load capacity: 3 t -Dimensions: 200/80/H320 mm -Weight: 7.6 kg

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Sheet metal cleaning machine KD Putz Tubur 600 for 2 edge trays - Sheet metal cleaning machine with brushes - Manufacturer: KD Bakery Equipment - Type: Tubur 600 - 1.1 kW

Guillotine Shears - Safan Darley M-Shear 310-6 TS200 – BJ 2020

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Spout-hand wash combination, stainless steel

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

material width: 0300 mm material thickness: 2,50 mm no. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mm straightening speed: 5 - 30 mm/min sheet thickness - min.: 0,40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Features: • All upper rollers manually adjustable • All lower rollers interconnected via gears • Speed manually adjustable via handwheel • Strip guide at the infeed • Roller basket at the outfeed • Sensor arm for loop control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet metal cleaning machine AWS Reini R60L Automatic Feed For sheet metal dimensions 98 x 58 cm For 2, 3 and 4 edge trays Dry cleaning Dimensions LxWxH: approx. 80 x 60 x 105 cm High output with up to 200 sheets/hour Easy operation, care and maintenance Movable on castors (with hold-up)

material width: 1650 mm material thickness: 3,00 mm no. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm between stands ca.: 1720 mm run-in height: 1250 mm total power requirement: 45 kW weight of the machine ca.: 24,50 t dimensions of the machine ca.: m 6-HIGH LEVELER / Strip Leveler / with Quick-Change System - 18 Back-up Supports - Digital Roll Adjustment (0.01 mm resolution) - Gearbox renewed in 2021 - Quick-Change System The quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position. The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic. - Intermediate Rolls The intermed ...

Key data: 6000 mm, 6 mm

Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of construction 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 atü - Column passage: 4100 mm - Max. bending length: 6000 mm - Projection: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance of the tool holding surface: 300 - 800 mm Hydraulic pumps: - Main pumps: 2x 22 kW - Idle flow rate: 2x 153 l/min - Full load flow rate: 2x 33 l/min - Control pump: 0.75 kW Installation: - Footprint WxD: 6960 x 3250 mm - Height above ground: 4100 mm - Underfloor front: 2200 mm - Underfloor rear: 600 mm - Operating voltage: 3x 400 V / 50 Hz - Machine weight: 51000 kg

sheet width: 2050 mm plate thickness: 4 mm total power requirement: 3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: / mm plate thickness: / mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details.

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Manufacturer: Prinzing Model / Type: FME 4-600 Type of machine: Flanging machine Year of manufacture: 2012 Thickness: 4.0 mm Length: 65 mm Weight: 3650 kg Voltage: 400 V Power: 12 kW Current: 8.5 A Certification: CE Condition: Only has training hours on it Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Amada Year of manufacture: 1999 Model: GS 630 Type of machine: Hydraulic Shear Cutting force: 197 KN Power: 5.5/7.5 KW/HP Stroke: 160 mm Voltage: 400/415 Volts Amperage: 16 A Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

with CNC-path-control: FANUC type: 0i - MC for axes: 3 x-travel: 1020 mm y-travel: 530 mm z-travel: 560 mm table surface area: 1200 x 500 mm tool magazin:: numbers of tools: 32 max. tool-dia with free toolbox: 75 mm max. tool length: 280 mm max. tool weight: 7 kg milling head: spindle taper:: BT40 spindle turning speed - stepless: -12000 U/min Power: 15 KW rapid motion -longitudinal/cross/vertical: 32 m/min dimensions of the machine ca.: 2470 x 2540 x 2750 mm weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: - mm workpiece length: - mm work piece width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1500 mm workpiece width - max.: 0,5 - 50 mm dimensions: 3300 x 1500 x 1800 mm feed stepless: 0-4 m/min total power requirement: 20,4 kW weight of the machine ca.: 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a p ...

diameter: -- mm workpiece length: -- mm work piece width: 0 - 3 mm speeds: 3600 U/min range of angles: 30 - 60 (stufenlos) ° weight of the machine ca.: 31 kg dimensions of the machine ca.: 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mm workpiece length: -- mm work piece width: 0 - 20 mm speeds: 2850 U/min range of angles: 0 - 60 (stufenlos) ° weight of the machine ca.: 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting The unique mechanical scale to adjust the bevel width for higher precision A very compact and ergonomic design for high work productivity Circum ...

diameter: -- mm workpiece length: -- mm work piece width: 15 mm range of angles: 15-50 ° plate thickness: 6-40 mm total power requirement: 1,5 kW Feed speed: 3,5 m/min. dimensions: 530 x 395 x 860 mm weight of the machine ca.: 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - D ...

working width: 950 mm workpiece width - max.: 1,0 - 50 mm sandingbelt width: 970 mm sandingbelt length: 1900 mm weight of the machine ca.: 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. The intuitive operation via touch panel allows every employee get to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consi ...

: Hebefix A10 weight max.: 10 t machine weight ab.: 49 kg (2 Stück) kg : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 170 mm plate thickness: 0 mm number of rolls: 0 weight of the machine ca.: 0,1 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mm y-travel: 510 mm z-travel: 560 mm control: Matzatrol type: M Plus table surface area: 1300x550 mm : 1,5 t workpiece weight: max. 1500 kg Tool changer: . spindle taper ISO: Spindle capacity: KW turning speeds: . U/min total power requirement: kW weight of the machine ca.: 8,9 t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website.  ...

x-travel: . mm y-travel: . mm z-travel: . mm control: SIemens type: 840 D ECOLINE Shopmill table surface area: mm workpiece weight: kg Tool changer: 30 Fach spindle taper ISO: Spindle capacity: KW turning speeds: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible b ...

x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm feed: 36 m/min control: Siemens type: Shopmill 840 D table surface area: 800x500 mm workpiece weight: 600 kg Tool changer: 30 spindle taper ISO: SK40 Spindle capacity: KW turning speeds: 12000 U/min weight of the machine ca.: 5 t dimensions of the machine ca.: 4000x5000x3000 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team  ...

x-travel: 650 mm y-travel: 500 mm z-travel: 530 mm control: Siemens type: 840D Shopmil table surface area: . mm size of pallet: 800x500 mm workpiece weight: . kg Tool changer: 24 Fach spindle taper ISO: SK 40 Spindle capacity: KW turning speeds: 60-8000 U/min feed: 30 m/min total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4000x5000x3000 mm Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please conta ...

x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm feed: 30 m/min control: Siemens type: 840 D table surface area: 1250x600 mm table load: 800 kg Tool changer: 30 Fach spindle taper ISO: SK 40 Spindle capacity: KW turning speeds: 12000 U/min total power requirement: 24 kvA weight of the machine ca.: 8,8 t dimensions of the machine ca.: . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...

x-travel: . mm y-travel: . mm z-travel: . mm control: SIemens type: Shopmill 840 D table surface area: mm workpiece weight: kg Tool changer: 30 Fach spindle taper ISO: Spindle capacity: KW turning speeds: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appoin ...

for 60 x 80cm trays, smooth or 2-edge on the short side with automatic lubrication Stainless steel cladding with emergency stop switch mobile Return Output - without sheet metal wagon Outside Dimensions approx. width 115 cm, depth 110 cm, height 105cm

Cidan CNC guillotine shears in top condition (please note, the matching shears are also available) with rotatable upper beam 3m x2.5mm – with CNC control and depth stop, The scissors are in very good technical and optical condition, all bearings are perfect. The machine comes from a small business/first owner and is accordingly well maintained and maintained. Ideal for tinsmiths, roofers, carpenters, metalworkers or workshops looking for a precise and reliable bending machine.

material width: 100 mm material thickness: 1 mm cross cut: ? total power requirement: 0,75 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Sheet Cutting Machine Workspace: 100 x 1 Drive: 0,75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke: 15 mm pressure: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 1650 mm plate thickness: 4 mm straightening roll diameter: 45 mm support rollers: 140 Stk : 17 Stk : Sheet width: 1,650 mm Sheet thickness: 4 mm Leveling roller diameter: 45 mm Number of backup rollers: 140 Number of leveling rollers: 17 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm sheet thickness - max.: 10 mm sheet thickness - min.: 3 mm number of straightening: 13 Rollers straightening roll diameter: 145 mm straightening feed: 16 m/min bale length: 2330 mm distance b/n rollers centers: 150 mm diameter of bottom rollers: 290 mm main drive motor: 30 kW weight: 32 t Sheet width: 2,000 mm Max. sheet thickness: 10 mm Min. sheet thickness: 3 mm Number of leveling rollers: 13 Leveling roller diameter: 145 mm Leveling speed: 16 m/min Roller face length: 2,330 mm Center distance between leveling rollers: 150 mm Backup roller diameter: 290 mm Main drive motor: 30 kW Machine weight: 32 t Additional Information Number of backup rollers: 21 / 24 Number of support rows (upper / lower): 3 / 3 Traverse lifting speed: 0.71 mm/s Traverse adjustment range: –18 mm to +42 mm Max. lower traverse tilt: 8 mm The data for this ad was created with ModulMWS - the  ...

plate width: 2500 mm sheet thickness - max.: 32 mm sheet thickness - max.: 39 mm sheet thickness - min.: 8 mm bale length: 2700 mm number of straightening: 7 Rollers number driven straightening rollers: 5 Stk straightening roll diameter: 290 mm diameter of input / output straightening rollers: 345 mm number of support rollers: 13 Stk diameter of support rollers: 288 mm stroke of upper beam: 120 mm straightening feed: 16 m/min rated power of main drive: 90 kW : 138 kw weight: 79 t Sheet width: 2,500 mm Max. sheet thickness (St 50): 32 mm Max. sheet thickness (St 34): 39 mm Min. sheet thickness (St 50): 8 mm Roller face length: 2,700 mm Number of leveling rollers: 7 Number of driven leveling rollers: 5 Leveling roller diameter: 290 mm Outlet leveling roller diameter: 345 mm Number of backup rollers: 13 Backup roller diameter: 288 mm Upper beam stroke: 120 mm Leveling speed: 16 m/min Main d ...

x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm Control: Siemens 840 D feeds - fine adjustment: 1-8000 mm/min table-size: 2120 x 500 mm table load capacity: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle turning speed - stepless: 0-15000 U/min spindle motor: 20 kW spindle bearing diameter: 70 mm tool diameter: 63 /126 mm tool magazin:: 40 Stk weight: 12 t total power requirement: 65 kVA weight of the machine ca.: t dimensions of the machine ca.: m X-axis travel: 2,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Control system: Siemens 840 D Feed rate (fine adjustment): 1 – 8,000 mm/min Table size: 2,120 × 500 mm Table load capacity: 2,000 kg Rapid traverse (X-axis): 40 m/min Rapid traverse (Z-axis): 20 m/min Tool holder: HSK-A63 Spindle speed range (infinitely variable): 0 – 15,000 rpm Spindle drive: 20 kW Spindle bearing  ...