metal sheet used for sale

Motorized crank sheet metal shears make FASTI type 507 15-3.5Machine -No: 84517010 built in 1984Technical specifications:Cutting length: 1540 mmmax.sheet thickness: 3.5 mmAdjustment range of backgauge: 1500 mmStrokes per minute: 56Drive power: 7.5 kWWeight approx: 1610 kgwith- Front-operated motor stop with digital display and 1 dimension preselection- foot switch- single stroke - continuous stroke - jogging- Side stop 750 mm- 2 table extensionsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal bender Useful length 2000mm Maximum bending of iron sheet at 2000mm 3mm thickness

Sheet metal plastering machine Reini 60? Product? Manufacturer: Metall- und Apparatebau GmbH? Type: Reini 60? Year of construction: 1990? Condition: used, tested, baker's condition? Material: stainless steel? Cleans with rotating brushes? suitable for 3 rand sheet sizes 60 x 80 cm? With 2 parking brakes? External dimensions W.: 79 cm, D.: 55 cm, H.: approx. 135 cm (height with attachment)For details see pictures

Sheet metal storage tower, 26 compartments, Stopa, format 2500x1250mm – second-hand - : Price from location: 24.500.-€ (net), plus dismantling etc.! Manufacturer: Stopa Type: Tower Year of construction: 1996 Space Requirements: Width: 4200mm, Tower depth: 3950, with carriage outside: 5600mm or more depending on rail length Height: 6725mm Load capacity per cassette: 3,000kg Storage locations: 26 Storage capacity: 78 tons. Sheet size: 1,250 x 2,500mm Condition: good, has been serviced annually by Stopa Available: Dismantling: week 30 2024, Location: Switzerland, 1950 Sion For dismantling: 3T indoor crane and 4T forklift are available free of charge (without driver, who must have a valid driver's license for these machines).

sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic swing cut - sheet metal shears make DIGEP type DLB 16/3100Machine -No: 71, built in 1986Technical specifications:Knife length: 3100 mmCutting length: 3000 mmMax. Sheet thickness: 16 mmNumber of strokes single operation / series operation: 8/12 H / min.Power requirement: 39 kWWeight approx: 25.5 tDimensions approx: 5160 x 3000 x 2700 mmWith- 4 table extensions- motorized backgaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make VOEST-ALPINE type BTHS 8 x 3150Fabr. -No: MBO-565Technical specifications:max.cutting length: 3150 mmmax.sheet thickness: 8.0 mmThroat: 300 mmInfinitely variable cutting length adjustment: 500 - 3150 mmStop adjustment range: 0 - 1000 mmWeight about 10.2 tDimensions approx: 3500 x 2300 x 1900 mmwith- motorized backgaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make SAGITA BEYELER type 3100 x 12Ser. -No: 27994 built in 1975Technical specifications:Cutting length: 3100 mmmax.sheet thickness: 12 mmDistance between the uprights: 3250 mmCutting angle: 2.0 °Number of cuts per minute: 24 - 34Dimensions approx: 3650 x 2050 x 2050 mmDrive power: 40 hpWeight approx: 13 twith- Cutting gap adjustment- Adjustment range of the stop 1100 mm- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lever guillotine shears make HUNDT - KRAMER type HBS IIISerial -No: 48001 year of manufacture 1990Technical specifications:Useful length: 1020 mmMax. sheet thickness: 1.25 mmWidth stop adjustable: 0 - 550 mmExternal dimensions: 1800 x 950 x 850 mmWeight approx.: 250 kgwith- open sheet metal holding for longer cuts in the push-through procedureused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal shear make LOTZE Year of construction approx. 1960 Working length: 1500 mm Sheet thickness (steel): 8 mm Motor power approx .: 17 kW External dimensions approx. L x W x H approx .: 2500 x 1900 x 1600 mm Weight approx .: 5 t With: - 2 front support arms - Angle stop - Foot release - Finger guard used, in very well maintained and functional condition Price on request. Delivery: ex warehouse or location free loading truck. Payment: net at takeover or by appointment. Technical data are not binding. Errors excepted. We would be pleased, if you like our offer and are always available for your queries. Best regards M. Waldeck WAHO Machine Tools

Crank sheet metal scissors make LOTZE type probably KShy 25Max. Cutting length: 2500 mmMax. Sheet thickness approx: 5.0 mmlateral projection: 70 mmTable width: 500 mmDimensions L x W x H: 3100 x 1600 x 1300 mmWeight: 4000 kgWith- Table extensionthe front cover plates are missingused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Warehouse number: 3726 SHEET METAL BENDING MACHINE Manufacturer: SCHROEDER , Type: 2500 x 2.5 mm Machine NO.: 6290, Year of construction: 1987 Specifications: Size bending length 2550 mm Size sheet thickness 2.5 mm Program-controlled backgauge. Siemens - 1000 mm Control Siemens Fabr. Touchscreen Mechanical. Accessories: Length: 2000 mm, Høhe: 1700 m0, Width: 3100 mm, Weight: 2600 kg

Sheet metal shears FEIN QSz 649 0.75 KW 1100 strokes / min 220 V 1AC 50 Hz Sheet thickness: max. Ø 3.5 mm without knife ! used, checked ! Dimensions ( without cable ): 440 x 290 x 90 mm

Tin shear attachment for drill, sheet metal nibble NAREX NP2 sheet thickness: max. 2 mm necessary drill collar: Ø 42 mm drive width: 17 mm New ! Dimensions: 200 x 200 x 80 mm

For sale a CNC cylindrical (roller) feeder for an eccentric / hydraulic press, type: srf 120.1250, manufactured by Cattaneo, Italy, 2003. The feeder is in perfect condition - like new. Maximum thickness of the supplied sheet metal: 8mm, sheet width: 1250mm, total weight approx. 4500kg. The machine is currently dismantled, all on 5 pallets.

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,445 t dimensions of the machine ca.: 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tin shears, high-frequency sheet metal nibblers, high-frequency tools, high-frequency machines FEIN QSz 848 0.5 KW 1240 strokes / min 265 V 3AC 200 Hz sheet thickness: max. 3.5 mm approx. 3.5 m Connection cable used, tested ! Dimensions (without cable): 310 x 290 x 85 mm

Tin Shears, High Frequency Sheet Metal Nibbler, High Frequency Tool, High Frequency Machines FEIN QSz 838 0.24 KW 1850 strokes / min 265 V 3AC 200 Hz sheet thickness: max. 2.5 mm approx. 3.5 m Connection cable used, tested ! Dimensions ( without cable ): 250 x 160 x 65 mm

Tin Shears, High Frequency Sheet Metal Nibbler, High Frequency Tool, High Frequency Machines BOSCH EW/HEP 64A4Z1 0,1 / 0.12 KW 2075 / 2775 strokes / min 200 / 265 V 3AC 150 / 200 Hz sheet thickness: max. 2.5 mm approx. 3.5 m Connection cable used, checked! dimensions ( without cable ): 240 x 230 x 90 mm

We offer you here a sheet metal cleaning machine from Jeros, for plates 60x80. If you have any questions or questions, we are happy to provide you with Delivery at an additional cost possible

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal shears make RAS type 83.25Machine -No: 27/10Technical specifications:Cutting length: 2540 mmSheet thickness max.: 3.0 mmNumber of strokes per minute: 50Cutting Angle:1.35°Table width: 430 mmTable height: 750 mmlateral projection: 100 mmRear stop adjustment: 550 mmDrive power: 5.5 kWWeight approx.: 2.5 twith- manual backgauge- manual adjustment of the back gauge from the front with reading scale- foot switch- angle stop- support arms- Tilting roller tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

material width: 305 mm material thickness: 1,0 mm speed: von Hand weight: 45 Kg dimensions: 500 x 340 x 420 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet metal shelf, screw shelf, storage shelf, screw shelf -Execution: stable -Dimensions: 620/1420/H1400 mm -Own weight: 260 kg

Jeros sheet metal cleaning machine Type: 5015 for 2 edge sheets 60x40 and 58x78cm with rear return for the sheets Stainless steel cladding on rolls 380V 50Hz Height: 103cm Width: 90cm Depth: 80cm

Sheet metal cleaning basin FrischManufacturer : FrischType : SpritzmaticExternal dimensions : W: 122cm D: 33cm H: 86cmInterior dimensions : W: 102cm D: 29cm H: 70cmCleaning for 60x40cm and 60x80cm wide trays on rollsDetails see picture  

Sheet Metal Plastering Machine KD PutzManufacturer : KD PutzType : AVIDI 800240/400Volt 50Hz 1,1kW 4,0AZum cleaning of 2-sided baking and perforated trays.Chassis completely made of stainless steela dirt drawer made of stainless steelfor 58x78cm wide trays on wheelsBaker's conditionDetails see picture

KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls

Sheet Metal Plastering Machine KD PutzManufacturer : KD PutzType : II A.M.K240/400Volt 50Hz 1,1kW 4,0AZum Cleaning of 2-sided baking and perforated trays.Chassis completely made of stainless steela dirt drawer made of stainless steelfor 58x78cm wide trays on rollsBaker's condition

Machine type: Sheet metal scissors (lid scissors) Manufacturer: MÜLLER & KURTH Condition: very good Offer type: used machine Specifications: Power: 1100 x 1.0 mm Drive type: by hand Remark: Parallel stop, Hold Weight: 300 kg The machine is in a very good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.

Suitable for 600 x 800 mm baking trays with lubrication with sheet metal recirculation

With oiling; 5 brushes; with sheet metal storage trolley; Analog control; Stainless steel

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual sheet metal shears make PEXTO type 137 / LMachine -No: 10/70Technical specifications:Cutting length: 1020 mmCutting thickness normal steel: 1.6 mmTable width: 300 mmWith- 2 extension arms 600 mm- foot disengagementused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: neu : ca. 10 Wochen ab Auftrags : Türkei : 67700 € : 1354 € : 3100 mm : 10 mm : 10 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1460 mm : 1550 mm : 7500 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52100 € : 1042 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 3750 mm : 1180 mm : 1300 mm : 4000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad wa ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1074 € : 2550 mm : 8 mm : 8 mm : 6 mm : 220 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 4900 mm : 1100 mm : 1250 mm : 4600 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31400 € : 634.28 € : 1550 mm : 6 mm : 6 mm : 4 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 3750 mm : 880 mm : 1100 mm : 2400 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 707 € : 2050 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created w ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111100 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 117800 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 56100 € : 1122 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1425 mm : 1470 mm : 5450 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127000 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 64100 € : 1282 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1460 mm : 1550 mm : 6800 kg STANDARD EQUIPMENT fully hydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing hardened rolls 2 working speeds central lubrication system protectionagainst overload moveable control pane user manual in GERMAN and ENGLISH machine and equipment accordingto the CE regulations OPTIONAL EQUIPMENT ground and polished rolls infinitely adustable speed of rolls hydraulic/mechanic adjustable upper and lateral supports aut. material withdrawal changeable upper roll for especially narrow bending radii IMPORTANT ISSUES AT CONICAL B ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 62200 € : 1244 € : 3100 mm : 9 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1425 mm : 1470 mm : 6350 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

- sheet metal cleaning machine for 2-, 3- and 4-edge sheets; smooth and perforated - for baking trays with 58cm width (58x58cm, 58x78cm, 58x98cm) - Dry cleaning with integrated brush lubrication - high output with up to 750 sheets per hour -Operator panel with status displays in national language -Daily and total piece counter, maintenance interval display -easy operation, care and maintenance -movable on castors with locks