metal saw used for sale

10 machines in stock EISELE high-performance circular sawing machine VMS 350 das ORIGINAL - made in Weilheim/Germany Equipped to accommodate saw blades up to 350 mm in diameter. Min. / max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 X 8 / 120 x 100 Smaller cross-sections on request. With pole-switchable three-phase motor, 1.4/1.9 kW, including clamping device to the left and right of the saw blade, stationary base frame with built-in coolant device and chip drawer, material support height 900 mm. Sawing machine is designed for voltage mains 400 V / 50 Hz. (3LNPE400V/50Hz). Spare parts supply for 10 years. Standard version with 17/34 min-1 or 34/68 min-1 Standard version, models differ in the type of cooling

Key data: 320 mm

2 pieces - Behringer HBE 321 A Dynamic new machines for immediate delivery from stock. Attention, you get up to 15% subsidy if you exchange an old sawing machine for a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active pruning monitoring (item 22) BEHRINGER Screw Chip Conveyor (Item 105) Automatic member start detection (item 535) Lighting (item 941)

Key data: 410 mm

BEHRINGER HBE 411 A DYNAMIC, NEW MACHINE! - at a top price, year of construction 2025/2026 factory warranty! manual positioning 18 Cutting Monitoring 22 Saw drive 5.2kW 50-2 Chip Conveyor 100 5 Micro 250 Package clamping device 440 Member Start Detection 535 Shut-off cylinder 550 Clamping pressure regulation 832 Line Laser 940 Lobr Sko Adpums Rrfsah Lighting 941 Cutting channel extension Behringer New Machines: Come-Cook-Buy immediately available from stock Warranty from the date of purchase Do you have an outage ? Replacement in the shortest possible time On request with delivery and assembly Immediately available from stock

TECHNICAL DATA: Transport carpet width: 220 mm Processing height: 120 mm Axle: Ø 70 mm Saw blade: max. Ø 350 mm Feed speed: 6-48 m/min Feed motor power: 1.1 kW Installed power: 18.5 kW EQUIPMENT: Replacement saw blades Tools and accessories

Auction-ID: A1-51211-41

Key data: 600 mm, 165 mm

TECHNICAL DATA: Saw blade: Ø 600 mm Cutting height: max. 165 mm Cutting width at the base: 460 mm Installed power: 7.5 kW EQUIPPED WITH: 01 Feeder roller conveyor with air stops: 1900 mm 01 Discharge roller conveyor: 1900 mm

5.5 hp 4 kW / fully equipped and functional with its 600mm blade Auction-ID: A1-51273-13

Unused in packaging; suitable blade size 350-500mm; 13HP; maximum depth 17cm; Rotation lever for height adjustment; 40L water tank; without saw blade; unused; 6529 Auction-ID: A1-51256-110

Hebu Medical HB 8894 Gold II – Oscillating plaster saw Oscillating saw for the safe removal of synthetic plasters and bandages in orthopaedics and traumatology. Manufacturer: Hebu Medical Model: HB 8894 Gold II Included accessories: 2 blades, tools, instructions, certificate of conformity, original box Power supply: 220–240 V – 50/60 Hz Power: approx. 250 W Weight: approx. 1.3 kg (without cable), 1.7 kg (with cable) Cable: approx. 4.5 m Condition: New Auction-ID: A1-51275-152

Unused in the original packaging AC8400 High-Frequency Ring Saw Rated power: 5 kw Blade dia: 400mm Max cutting size: 29 cm RPM: 2200rpm Voltage: 220V N.W.: 11 kg Auction-ID: A1-40407-49

Unused in the original packaging The UF Equipment DL400 Concrete Saw is a powerful and reliable ring saw, specially designed for cutting through concrete, asphalt, and other hard building materials. This professional concrete saw combines power, precision, and user-friendliness, making it the ideal choice for construction companies, contractors, and industrial use where heavy-duty cutting jobs are required. Extra protective caps and safety equipment. Transport wheels for easy movement around the workplace. Auction-ID: A1-40407-104

Stryker RemB 6400-034-000 – Electric Sagittal Saw Manufacturer: Stryker Model: RemB 6400-034-000 Part Number: 6400-034-000 Compatibility: Stryker CORE and TPS System Condition: Good, functionally tested Bone and hard tissue cutting in orthopedic, dental, ENT, neurosurgery, and endoscopy surgery. Auction-ID: A1-51275-44

Stryker RemB 6400-037-000 – Electric Reciprocating Saw Manufacturer: Stryker Model: RemB 6400-037-000 Part Number: 6400-037-000 Compatibility: Stryker CORE 5400-050 Console Condition: Good, Functional Tested Surgical Saw for Bone Procedures, Tool-Free Blade Change. Auction-ID: A1-51275-45

Maximum blade diameter: 300 mm. 1.5 kW (2 HP) single-phase motor, 220 V power supply, 2,800 rpm rotational speed. Motor equipped with thermal protection with RESET button, IP54 protection class, Italian manufacture. Functional Auction-ID: A1-51273-31

Synthes 530.615 Battery-powered Reciprocating Saw Drill Manufacturer : Synthes Model: 530.615 All buttons functional, no noticeable damage Condition: Good working condition as in the photos Auction-ID: A1-51275-113

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-51256-359

Oscimed PSV – Suction System for Plaster Cutting Manufacturer: Oscimed / Adhesia Laboratory Model: PSV Items not included: handpiece / saw Condition : in working order Auction-ID: A1-51275-69

Unused in the original packaging Oil-free & Brushless Ring Saw Rated power: 5000w Constant RPM: 1800 rpm Voltage AC220V Max cutting size: 39 cm Blade Diameter 500 mm Nw 11.5 kg Auction-ID: A1-40407-61

Unused in the original packaging Incl. water pump Power: 4000WATT RPM: 2000-4000RPM Max cutting depth: 350MM Battery: 80V 8.0AH Auction-ID: A1-40407-97

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-51256-360

A Motor: 2,825 RPM, 110/240 V, 50 Hz, Rated Power: 10.5 Amps. Equipped with thermal protection with manual reset. Functional Auction-ID: A1-51273-32

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 130 mm feed stepless: 0 - 1.000 mm/min rapid return speed: 1.550 mm/min manual operated rotary table: +/- 90 ° capacity 90 degrees: flat: 300 x 40 mm capacity 90 degrees: round: 130 mm material feed: L41NC programmable length: max. 9999,9 mm traversing speed: max. 50 m/min total power requirement: 3,50 kW weight of the machine ca.: 1,00 t dimensions of the machine ca.: 3,50 x 2,00 x H2,00 m Miter cut of +/-90, L41 NC electronic length stop, infeed and outfeed conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mm saw band length: 4640 mm cutting width: 260 mm control: Behringer BT41 capacity 90 degrees: flat: 300 x 260 mm cutting range min.: Ø10 / 10x8 mm min. cut-off length: 10 mm cutting speed steppless: 20 - 140 m/min sawing motor: 4,00 kW dimensions of saw-band: 4640 x 34 x 1,10 mm total power requirement: 8,50 kW weight of the machine ca.: 2,20 t dimensions of the machine ca.: 2,60 x 2,00 x H2,20 m With BEHRINGER BT41-Terminal and a built-in 60-liter coolant reservoir. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 x 2,5 x 32 mm cutting diameter: 100 mm cutting speed: 33/66 m/min height of material-table: 900 mm total power requirement: 1,8 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,05 x 0,50 x 1,80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 10000x2500x1600 mm Weight: 3300 kg Total power requirement: 16,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26343 Technical data: - Saw blade dimensions - vertical 650 x 4.4 x 50 mm positive - Horizontal 500 x 4.4 x 40 mm positive - Notching range 90° at approx. H 260 x D 190 x W 140 mm - 4 axis – NC control for cutting angle, notching height, notching depth - Vertical saw blade can be swivelled 45° outwards + 60° inwards - Horizontal saw blade can be swivelled 60° upwards and 55° downwards - Mitre stop of the profile support adjustable 60° to the left + right - Movable material support table - Pneumatic material clamping - Pneumatic coolant spraying device - 2 saw blades - Pneumatic connection 6 bar - Drive 400 V / 2 x 3 kW / 2800 rpm - Space requirement approx. W 1600 x H 1500 x D 1100 mm - Weight approx. 1300 kg

Serial No.: .432.05.266.15

Baljer & Zembrod Asterix AS/28H-R.D log sorting crane with saw. Year 1994. Approx. 9,500 operating hours. Used industrial machine. Last overhaul in 2023 and last service in 2026. Suitable for log handling and sorting operations in sawmills. Immediately available in Lugendorf, Austria.

EWD frame saw supports: four HDN 600 units, overhauled, and one GDZGE 600 unit, new. Heavy industrial components for sawmill applications. Overhaul completed in 2026. In stock and immediately available in Lugendorf, Austria.

EWD GDZ GE 71 high-performance sash gang saw, year 2006, 600 mm stroke. Swing-frame design. Passage width 710 mm, passage height 710 mm, maximum 300 rpm, drive motor approx. 130 kW. Continuous feed through infinitely variable hydraulic transmission with reverse gear and automatic hydraulic overhang adjustment. Hydraulic upper infeed rollers with adjustable pressure, spherical roller bearings, automatic central lubrication, electrical push-button control and shaker chute for sawdust separation. Overhauled and serviced in 2023.

REX HOMS-410-K two-side high-performance planer and saw combination, year 2004. Exchangeable planer heads, centre-cut guide saw, lower and upper working shafts and special lower multi-blade circular saw. Maximum planing width 410 mm, planing height 280 mm, saw cutting height 90 mm, self-feeding workpieces from 900 mm. Electronic feed 8–48 m/min. Drives: 5.5, 15, 22 and 55 kW plus 7.5 kW feed. Machine dimensions approx. 4,500 x 1,700 x 2,215 mm; weight approx. 7,800 kg. 400 V, 50 Hz, three phase. Overhauled and serviced in 2024.

LINCK V30 chipper-canter line with integrated VS pre-cut saw for continuous operation, year 2000. Suitable for processing side boards and changing log dimensions. Circular-operation clamping technology, PLC control, frequency-controlled feed and synchronised clamping/sawing units. Example data: feed speed up to 150 m/min, log lengths 3.0–5.2 m, top diameter approx. 8–62 cm, resaw cutting height up to 350 mm. Modular system prepared for additional milling and sawing units. Overhauled and serviced in 2025.

MÜLLER Olympia Universal 571 sash gang saw, year 1994. Frame width 710 mm and passage height 710 mm. High-precision, energy-efficient saw designed for stability, durability and easy maintenance. Forged high-strength steel saw frame and stress-relieved welded side frame for low vibration. Patented frame guide without continuous adhesive-oil lubrication. Split quick-change feed rollers with pressure control, synchronised lifting system, overload-protected drive clutches, machined steel flywheels and shaker chute. Overhauled 2022; last service 2024.

Three VOLLMER circular saw blade sharpening machines available. 1) CANA/E, year 1988, serial 9179: semi-automatic sharpening of carbide or HSS circular saw blades, automatic mechanical tooth feed, adjustable pitch and swivelling grinding head; AEG 0.75 kW motor, 2,800 rpm, 220/380 V. 2) VOLLMER CNHV: mechanical semi-automatic machine for carbide-tipped blades, AEG 0.55 kW motor, 2,750 rpm, suitable for approx. 80–600 mm blade diameter. 3) VOLLMER 55/2 H2: robust mechanical machine for HSS and carbide blades, 0.4 kW, 2,830 rpm, blade range approx. 80–500 mm. Solid cast-iron construction. Last service 2024.

roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m

total power requirement:2,2 kW dimensions of the machine ca.:2,15 x 1,47 x 2,24 m JAESPA V 380 DG /DGHS Vertical Mitre Band Saw This machine is a vertical double-mitre band saw designed for professional use in the metal, steel and mechanical engineering industries. In addition to straight 90° cuts, this band saw also enables mitre cuts to the left and right. The mitre range is up to 60° on one side and up to 45° on the other. This makes the machine particularly suitable for cutting profiles, tubes and solid material. The cutting speed and hydraulic saw feed can be adjusted to suit the material being cut. The machine is equipped with a coolant system. Technical specifications: ·Saw motor: 2.2 kW ·Hydraulic pump: 0.37 kW ·Coolant pump: 0.18 kW ·Belt speed: 17?100 m/min ·Saw blade dimensions: 4,250 × 34 × 1.1 mm ·Workpiece support height: 1,000 mm ·Coolant tank: 50 litres Robust ...

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden