133,687 used machines on RESALE, but how to find them? Machine Search
KASTOtec AC 5 for bi-metal or carbide The KASTOtec AC was developed for the optimal use of the tool technologies bi-metal, bi-metal plus, carbide and carbide plus offered on the market. ! Machine is currently being refurbished ! Cutting Area Round (mm): 530 Max workpiece height (mm): 530 Max width workpiece (mm): 630 Max. Rectangular Dimension (mm): 530x630 Max. dimension square (mm): 530x530 Max. material feed length, single stroke (mm): 600 Multiple feed rate (mm): 9999 Shortest Section Length (mm): 6 Shortest off-piece length (mm): 35 Dimensions saw blade (LxHxW mm): 7675x54x1.6 Saw Blade Speed (m/min): 30-300 Motor power (kW): 15 kW Machine dimensions (LxWxH mm): 2,235 mm x 5,335 mm x 2,820 mm Machine weight (kg): 6550 All prices are net plus VAT. VAT We expressly reserve the right to prior sale and errors Brokerage offer for RG-Tools GmbH
saw blade diameter: 350 x Ø 32.0 mm capacity 90 degrees: flat: 175 x 75 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 100 x 80 mm capacity 45 degrees: square: 85 x 85 mm turning speeds: 3000 U/min total power requirement: 1.5 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90 - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the s ...
Technical data Manufacturer: KNUTH Machine Tools Type: B 180S Serial Number: 9016987 Year of Make: 1999 Power consumption: 1 HP Voltage: 380 V Frequency: 50 Hz Power supply: 3-phase Configuration Horizontal Metal Band Saw Machine Workpiece clamping device Coolant device with feeder Mobile undercarriage Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-193
Technical data Manufacturer: Franz Häberle Maschinenfabrik Type: HL 4 Design: Metal Circular Saw / Cold Sawing Machine Configuration Manual workpiece clamping Swivelling sawing area with angle scale Coolant supply available Mounted on work table Additional OPTIMUM OPTIgrind GU 25 S Double Bench Grinder Remarks The machine comes from a plant closure and was used in ongoing production until the end. Auction-ID: A7-49302-114
Serial number: 22602005 Workpiece diameter: 10 -76.3 mm Maximum loading length: 6000 mm Maximum loading weight: 2160 kg Saw blade diameter: 285 mm Power: 7,5 kW Auction-ID: A7-40851-1
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-61
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-161
According to photos, weight estimated Auction-ID: A1-48554-144
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-261
2 speed settings (40/80 1/min) Auction-ID: A1-49516-11
Machine number: 4818 Operating voltage: 400 V Frequency: 50 Hz Rated current: 1.5 A Grinding wheel diameter: approx. 250 mm Auction-ID: A7-49089-377
ATTENTION: available at the end of December Auction-ID: A1-48824-69
Band Saw Kasto PBA 320/460 AU Round sawing range max.: 100 – 320 mm Square max.: 100/100 x 320/460 mm Section lengths min/max.: 0 – 580 mm Projection from column to saw blade max.: 690 mm Cutting speed: 16 – 160 m/min Saw blade dimensions L x Ø: approx. 4,670 x 38 mm Offcut length automatic/single cut: 100/10 mm Power consumption: 7.4 kW - 380 V –50 Hz Auction-ID: A7-49701-9
machine ready for transport and to be assessed on viewing day Auction-ID: A1-48648-108
Technical data Manufacturer: Behringer Type: HBP 220 Design: horizontal metal band saw machine Dimensions L × W × H: approx. 1,900 × 1,100 × 1,800 mm Weight: approx. 1,500 kg Configuration With workpiece clamping device, saw blade protective covers, pressure indicators, adjustable saw feed, separate control console with push buttons, main switch and emergency stop as well as machine light. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-16
Technical details Type: Horizontal metal band saw Configuration: - Hydraulic saw bow - Continuous metal-cutting band saw blade - Hydraulic feed cylinder - Dual hydraulic workpiece clamping system - Adjustable material feed carriage - Feed screw adjustment - Coolant lubrication system with flexible nozzle - Coolant collection tray - Separate electrical control pedestal - Heavy-duty cast-iron frame Application: - Cutting steel bars - Cutting tubes and pipes - Cutting structural profiles - Cutting solid stock - General metal fabrication Construction: - Hydraulic gravity-feed operation - Automatic cutting cycle - Integrated hydraulic power unit Dimensions: - Length: Approx. 2400 mm - Width: Approx. 1600 mm - Height: Approx. 1700 mm Weight: Approx. 1400 kg Condition: Used Observed condition: - Machine appears structurally complete - Saw head and hydraulic cylin ...
Machine number: 1042455 Cutting length: approx. 3000 mm incl. right roller conveyor Roller conveyor length: approx. 2000 mm Roller conveyor width: approx. 350 mm Roller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156
Technical details Manufacturer: ZMM Vratsa Type: Horizontal metal band saw Configuration: - Hydraulic saw bow feed - Hydraulic double workpiece clamping cylinders - Adjustable machine vice - Roller material support - Hydraulic feed system - Gear-driven saw head - Coolant system - Electrical control panel Application: - Cutting steel bars - Cutting pipes and tubes - Cutting structural steel sections - General metal fabrication Construction: - Heavy-duty cast-iron frame - Hydraulic automatic cutting system Dimensions: - Length: Approx. 2600 mm - Width: Approx. 1800 mm - Height: Approx. 1700 mm Weight: Approx. 1800 kg Condition: Used Observed condition: - Machine appears mechanically complete - Hydraulic clamping cylinders installed - Feed mechanism and gearbox present - Coolant system installed - Heavy dust accumulation and surface corrosion visible - Long- ...
Technical data Manufacturer: KNUTH Model: HB 300C Type: Horizontal metal band saw machine Configuration Workpiece clamping device Material stop Machine Light Control panel with push buttons, selector switch and emergency stop Saw Blade Covers Integrated drip tray Auction-ID: A7-49302-65
The S121G is a compact metal band saw with swiveling saw arch and automatic shut-off at the end of the cut. • Brand: Quantum • Type: S121G • Serial number: 001166 • Year of construction: 2006 • Power supply: 230 V / 50 Hz • Motor: approx. 0.25–0.37 kW, depending on version/documentation • Saw band: 1,638 × 13 × 0.65 mm • Cutting speeds: 21 / 31 / 54 m/min • Max. round material at 90°: Ø 115 mm • Max. rectangular material at 90°: 100 × 150 mm • Miter cuts: 0–45° • Weight: approx. 56 kg • Saw band guide: roller guide • Manual saw arch lift • Automatic stop after the cut • Manual tire tension • Adjustable cutting pressure via spring • 56 kg and a saw band of 1638 mm. • Dimensions 55 × 90 × 100 cm Auction-ID: A3-46152-11977
Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-159
Optimum OPTI S 275 G Professional Metal Band Saw, Year 2006, Heavy Duty Frame Mounted. Machine equipped with an adjustable clamping vice, a swivelling bow for straight and angled cuts, a hydraulic lowering system, a control panel with emergency stop and an integrated lubrication/cooling system. Two cutting speeds: 45 and 90 m/min. Blade of 2480 × 27 × 0.9 mm. Maximum capacity at 90°: 180 × 245 mm for rectangular profiles and Ø 225 mm for round parts. Power supply 400 V – 50 Hz, motor power 1.1 kW. Weight indicated by the manufacturer: 200 kg. Auction-ID: A3-46152-37202
Machine number: 3512105465 Operating voltage: 400 V Frequency: 50 Hz Connection: 1.8 kW Saw blade diameter: approx. 250 mm Reference: Zafa - Lot 20 Auction-ID: A7-49882-104
Infeed roller conveyor 3480 mm; discharge roller conveyor 2300 mm; hydraulic workpiece clamp; with 3x various saw blades Auction-ID: A1-49659-24
including roller conveyor system Auction-ID: A1-49836-39
Stored in working condition, with 2 new band saws. Auction-ID: A3-46156-17117
Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...
Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine -Manufacturer: Ferm 7, Metal band saw -Type: BZ-175 -Drive: 0.75 kW -Cutting capacity 90°: Round 180mm, Rectangle 260x180mm -Cutting capacity 45°: Round 115mm, Rectangle 115x180mm -Saw band speed: 70-110, 150-195 m/min -Saw blade: 2360 mm -Transport dimensions: 460/1230/H990 mm -Weight: 140 kg
Aluminum Circular Saw Machine - Discharge roller conveyor 4000mm with handwheel, Foldable stop and digital system - Feed roller conveyor 3500mm - Transport dimensions 6.0m x 2.0m x 1.6m Saw blade diameter 400 mm Cutting range at 90 degrees: around 130 mm Cutting range at 90 degrees: square 110 mm Cutting area at 90 degrees: flat 180 x 100 mm Saw blade speeds 3000 rpm Total power requirement 2.2 kW Machine weight approx. 0.51 t Dimensions L x W x H 3.8 x 1.6 x 1.7 m Auction-ID: A7-49782-648
Lg.Nr. 26301 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° to around 130 mm - Square 120 mm -flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° to around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade - Infinitely adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - hydr. Material vise with hand crank for fine adjustment - Infinitely adjustable clamping pressure - 2 pieces of hydraulic retainers - Micro spray coolant device - Original discharge - roller conveyor with dimension stop 4000 mm - Roller conveyor feeder 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg
Machine number: 232597 Operating voltage: 400 V Nominal current: 32 A Belt length: 5080 mm Control: SIEMENS SIMATIC HMI Material support height: 1200 mm Roller diameter: 630 mm Projection: 370 mm Maximum cutting height: 320 mm Guide rod (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Sawing parameters - Belt speed: 250 - 2000 m/min incl. roller conveyor width: 350 mm Reference: Heraeus Auction-ID: A7-49882-162
Machine number: 22674 Table dimensions: 780 x 740 mm incl. welding strap and whetstone Reference: Hanon - Lot 14 Auction-ID: A7-49882-271
Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.
Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper, ...
Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...
Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available
Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm
The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine ...
We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price â?¬13.00 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.
Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request
Metal detector without tape If you have any questions: 01718367957
A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...
Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.
FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser ...
Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new
Loma Model: 7000 metal detector checkweigher Serial: ECB1101424575 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins
maximum number of results exceeded
please refine your search
150 € 
