metal saw used for sale

MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased

MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.

Auction-ID: A1-40976-14

MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.

MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds

ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor

This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information.

accurate, square cutting of steel tubes, profiles, and solid bars,

Min. saw diameter 5 mm, max. saw diameter 260 mm, MEBA NC control, fast single cut at the touch of a button, MEBA roller belt 3000mm height adjustable, connected loads 380 V 16 A, hydraulic clamping pressure control for thin-walled components, mitre cut 40° - 90° stepless, WIKUS Marathon M42 saw blade, incl. 3x spare belts

In its original crate. Never used. With cardboard in addition. Carton size: 68 x 64 x 40 Case size 133 x 80 x 109

Saw blade diameter: 250 mm

Unused

Machine number: 693601 Blade length: max. 3320 mm Blade length: min. 3120 mm Table dimensions: 500 x 500 mm incl. saw blade welder and grindstone

By Titex/Record

In its original box. Never used. Motor: 3.5 kW Carton size: 63 x 36 x 47

Circular Metal Saw manufactured in 2013. This SCHÜCO PGS features a maximum saw blade diameter of 400 mm and a motor speed of 2800 min⁻¹. It includes essential equipment such as a wireless measuring rod, roller conveyor tracks, a digital control screen, and an integrated extraction unit. If you are looking to get high-quality glazing bead cutting capabilities, consider the SCHÜCO PGS machine we have for sale. Contact us for further details.

Saw blade metal SELECT Length: 30 m Dimensions: 12 x 0.65 mm

This 3-axis SCHÜCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 min⁻¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÜCO PDG E CUT double mitre saw we have for sale. Contact us for further details.

Saw blade metal WIKUS Biflex 2ZpZ clawtooth Dimensions: 8128 x 50 x 1.30 mm

Saw Blade Metal KASTO M42 2ZpZ Dimensions: 8028 x 50 x 1.30 mm

Metal saw blade, saw blade WIKUS BIFLEX VARIO M42 4120 x 27 x 0.90 mm 10 - 14 ZpZ ( teeth per inch ) Length: 4120 mm Width: 27 mm Thickness: 0.9 mm New ! Dimensions ( packaging ): 430 x 430 x 55 mm

Manufacturer: KASTO Model: KASTOflex F Year of Manufacture: 2018 Technical Specifications - Dimensions (LxWxH): 4800x1500x1900 mm - Weight: 2,700 kg - Power Supply: 400 V - Power: 13 kW Find more here - / Contact us at -

Offer 24573 Specifications: - Cutting wheel diameter up to 356 mm - Separation capacity up to 120 mm -Mot. Cutting Feed -One. Transverse infeed 120 mm - Table dimensions 410 x 310 mm - Table travel 220 mm - Drive 400 V / 5.5 kW - Coolant device - Space requirement approx. W 1500 x H 1800 x D 1050 mm - Weight approx. 850 kg

Lg.Nr. 24029 Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Material replenishment machine - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 40 mm Cutting speed: 10 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm

This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us.

This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information.

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

This sawing machine was manufactured in 2010. The KASTO Radial M10 can handle a variety of materials with cutting capacities up to 100 mm for round solid materials and tubes, and 170 x 90 mm for flat materials. It operates on a 400 V 50 Hz 3-phase connection and measures 600 x 800 x 1700 mm, weighing 452 kg. For more information about this sawing machine, please reach out to us.

This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine.

This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine.

This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine.

This 3-axis MOSSNER Rekord SSF 630 Metal Band Saw was manufactured in 2019. It features an 11 kW reinforced motor, dual-speed manual transmission, and a complete roller guide. The saw includes a feed table with 4 T-slots, an emergency stop button, and an LED work light. Its mounted on a steel plate for stability, with spare saw blades included. Consider the opportunity to buy this MOSSNER Rekord SSF 630 Metal Band Saw. Contact us for more information.

This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine.

This JAESPA W 440 HA Metal Band Saw was manufactured in 2015. It features a saw band length of 4,900 mm and operates on 400 V / 25 A. Certified with CE standards, consider the opportunity to buy this JAESPA W 440 HA Metal Band Saw. Contact us for more information.

This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details.

Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details.

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, Vertical band saw USF-5R -Drive: 3 kW -without brakes, removed -Cutting width: max. 500 mm -Cutting height: max. 400 mm -Saw blade: Length 3850 to 4050 mm -Saw blade speed: stepless -Work table: swiveling -Accessories: including additional band saw blades (see photos) -Dimensions: 1300/910/H2140 mm -Weight: 625 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, vertical band saw type USF 10R -Drive: 2.2 kW -Cutting width: max. 1020 mm -Cutting height: max. 275 mm -Saw band: length 4700 to 4800 mm -Saw band speed: continuously adjustable from 12-2000 rpm in 4 gear levels -Work table: pivoting 45°/15° -Dimensions: 2160/1000/H2000 mm -Weight: 1250 kg

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm -Quantity: 2x box available -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm -Weight: 8.2 kg/piece

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/400 with saw band welding device -Cutting width: max. 390 mm -Cutting height: max.215 mm -Engine power: 1.1 KW -Saw band: length 2780 to 2980 mm -Saw blade speed: adjustable -Work table: swiveling -Band saw welding machine: Ideal BSO -Dimensions: 1050/630/H1670 mm -Weight: 414 kg