metal saw used for sale

Inv. Num. : 9184 Type: HA 250 W Producer: AMADA Created: 2024 Parameters: Saw blade dimensions: 3505 x 34 x 1.1 mm Weight: 1500 kg

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement.

Key data: 420 mm, 170 mm, 115 mm

400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand

cutting diameter: 360 mm saw band length: 0 mm cutting width: 0 mm cutting speed: 0 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 2,2 x 2,05 x 1,5 m Horizontal Bandsaw - Max. Miter Angle: 45° - Coolant System - Emergency Stop - 1300 mm Infeed Roller Conveyor - 2 Spare Saw Blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle,, coolant system,, stepless adjustable working rate,, machine light., 1 sawblade mount., Circular saw blade diameter: 165 - 630 mm, Tooth pitch: 3 - 50 mm, Saw blade thickness: 2 - 6 mm, Working speed: continuously adjustable from 24 - 50 z/min., Grinding wheel diameter: 25 and 30 mm, Grinding wheel width: 0.3/0.4 and 0.5 mm, Connected load approx.: 0.4 kW (400 V / 50 Hz), Weight approx.: 210 kg, Dimensions W x D x H approx.: 1020 x 900 x 1620 mm, colour: light grey RAL 7047

Max. saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangle 380x70m Cutting capacity 45° left Round 180mm, square 150mm; Rectangle 290x70mm Cutting capacity 45° right Round 180mm, square 150mm; Rectangle 290x70mm Digital degree display for the saw table Turning range of the saw table 180° Spraying device 2-hand operation

Max. saw blade diameter: 350 mm Pneumatic material tensioners Micro spraying device Material feed via 2-hand operation Saw table can be rotated in both directions Length stop and roller conveyor on request

Grecon Dimter Opticut S50 Optimizer Material input length max: 5000mm Wood width min/max 20-300mm Wood thickness min/max 10-100mm Packet cutting capability Cutting out material defects CE Certificate

Panel saw manufactured in 2006. This MAYER AL160 features a saw blade diameter of 650 mm and a maximum cutting width of 3200 mm x 3200 mm. It has a main saw motor power of 35 kW and offers variable forward speeds for both the saw aggregate and infeed. If you are looking to get high-quality panel cutting capabilities, consider the MAYER AL160 machine we have for sale. Contact us for further details.

Hacksaw, hacksaw machine, metal hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw, with coolant system and stop -Type: HBS 250/280 -Motor: 0.65/1.0 kW -Cutting speed: 2-stage / 16-32 m/min -Cutting width: 280 x 180 mm -Cutting range at 45 degrees: approximately 180 mm -Cutting area at 45 degrees: square 170 x 200 mm -Saw blade: Length 450 mm - Clamping stock: swivels 45° Machine dimensions: 1300/1100/H1090 mm -Transport dimensions: 1300/600/H1090 mm -Weight: 200 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Quantity: 2 hacksaws available -Price: per piece -Machine dimensions: 1300/640/H1115 mm -Weight: 338 kg

IRION trimming circular saw without cross-cut saw system Saw Blade Fixe ( Electrically Singable ) Cut length 6200 mm Cutting height 150mm Attention: Saw blade electrically "singable" Ready to ship!

Table saw, precision circular saw Manufacturer: Rapid Model; PK-100 Motor: 2.2 KW

Mitre punch - angle cutting machine Manufacturer: Dan-List / Morso Model No.: EH Year of Make: 2008 Fully automatic, electric - pneumatic, 2-hand control Double mitre 45° Single mitre up to 90° Working width max. 100 mm Working height max. 180 mm Cross-section: 70 / 70 mm

Cutting length min./max.: 370mm/5100mm, max. cutting width: 375mm, max. cutting height: 150mm, saw blade diameter: 500mm, saw blade bore: 30mm, swivel range: 45°-90°. Machine dimensions X/Y/Z: approx. 6100mm/1450mm/1450mm, weight: approx. 700kg. An on-site inspection is possible.

Cross-Cut Saw MZ Project CS 1000 Optic Cutting width 1000mm Cutting height 100mm Saw size 550mm Electronic Raising and Lowering of the Pressure Beam Material Automatic material feeding Side discharge of cut material Introductory table length 320cm Receiving table length 255cm Width of rollers in tables 650mm Year of manufacture 1999 Operating pressure 6bar CE mark Machine dimensions 650x190x190cmH Net price

Key data: 700 mm

A Behringer HBP 530 is hereby sold, as this is no longer needed if you are interested, please feel free to write to us

Includes roller conveyor (approx. 250cm infeed and 120cm with stop) Adjustable stop with scale Automatic clamping and feed Max. saw blade diameter 400mm Miter cut Coolant pump Documentation 400V

Panel saw manufactured in 2007. This Altendorf F 45 features a cutting length of 3000 mm, a main saw with a power of 5.5 KW, and a maximum main saw blade diameter of 500 mm. If you are looking to get high-quality cutting capabilities, consider the Altendorf F 45 panel saw we have for sale. Contact us for further details.

Vertical - Band Saw MÖSSNER SM 420 - Roll diameter 420 mm - Projection 410 mm - Workpiece height 265 mm - Saw blade length 3150–3260 mm - Saw band width max. 16 mm - Table size 600 x 600 mm - Working height 1000 mm - Total power requirement 1.1/1.7 kW - Incl. welding device - Incl. grinding device - incl. work light - incl. semi-hydraulic - Weight feed device - Incl. tilting work table - incl. operating instructions LxWxH 0.9x0.9x1.9 meters / Weight 500 kg

FORTE SBA 240 - Fully automatic band saw / 2x column-guided -Cutting diameter 250mm -Cutting speed 10-70 m/min -Multiple feed -Saw blade length 3660x27x0.9mm -Total power requirement 3 KW -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2x1.7x1.6 meters / Weight 1000Kg

- 1 x KLAEGER band saw HBA 265 built in 2001 - 1 x KLAEGER band saw HBA S265 built in 2008

Optimum 275 N Demonstration Machine Model: Opti S 275 N Technical data: Cutting range 0 degrees round: diameter 225 mm Cutting area 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees round : diameter 160 mm Cutting range 45 degrees: 160x160 mm / rectangle Cutting range 60 degrees round: diameter 100 mm Cutting range 60 degrees: 100x100 mm / rectangle Lifting the saw bracket: manual Feed: infinitely adjustable

cutting diameter: 420 mm saw band length: 5744 x 1,3 x 41 mm cutting width: 420 mm cutting speed: 15 - 110 m/min : 7,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,9 x 2,4 x 2,1 m Hydraulic band saw machine with - Material feed 1000mm - Motorized saw blade tension - Emergency stop device - Replacement saw bands The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx.  ...

Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details.

Panel saw manufactured in 2008. This HOLZMA HPP 350/43/38 features a saw blade projection of 80 mm and a cutting length of 4300 mm, providing efficient cutting capabilities. It includes a powerful main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW. If you are looking to get high-quality panel cutting capabilities, consider the HOLZMA HPP 350/43/38 machine we have for sale. Contact us for further details.

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

Band Saw Bizerba FK 23, completely in stainless steel, with brake, portioning stop, new scrapers and new saw blade, Connection 400V, year of construction 2008, dimensions LxWxH approx. 60x52x85cm, weight approx. 75kg, good used condition, works perfectly

saw blade diameter: 225 x 32 mm cutting diameter: max. 70 mm bei 90° mm miter cut: 0°-45°-60° miter cut: 1° Skala spindle turning speed range: 42 / 84 U/min Max. round cutting cross-section at 90°: 70 mm Max. rectangular cutting cross-section at 90°: 80 x 50 mm Max. round cutting cross-section at 45°: 64 mm Max. rectangular cutting cross-section at 45°: 60 x 50 mm Saw blade diameter: 225 mm Bore diameter: 32 mm Includes lubrication system Includes base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment.

Panel sizing saw Schelling type FH6 330/330 Technical data: Main motor (kW): 27 Scoring Saw Length (mm): 3300 Saw width (mm): 2200 Panel thickness (mm): 40 All information is manufacturer's information

A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible.

Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades., Accessories:, Motorized rake angle adjustment,, Coolant system,, Automatic central lubrication,, Machine light,, 2 grinding wheel holders,, 1 sawblade mounting bolt., sheet thickness: up to 8 mm, Tooth pitch: 6 to 120 mm, rake angle: - 15° to + 25°, Tangential free angle: 0° to 6°, Radial free angle: - 4° to +6°, Connection value: ca. 1,1 kW (400 V / 50 Hz), Weight: about 1150 kg, Grinding wheel diameter: Max. 125 mm, Bore diameter: 32 mm, Dimensions L x W x H: 1340 x 1400 x 2000 mm, colour: green, Circular saw outer diameter: 80 to 460 mm

CUTTING . TRIMMING SAW machine for solid wood MZ PROJECT LC 4000 second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. Maximum cutting length: mm.4000 motor power: Hp 15 Total weight: kg. 3.000 volts: 380/50

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm Saw blades cannot be swivelled 2 saw motors Motor power approx. 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2000 mm Weight approx. 1300 kg Shipping dimensions approx. 3900 mm x 1300 mm x H 1200 mm

Panel saw Type: T65 Manufacturer: Otto Martin Year: 2017 Available: 10/2026 Min saw blade diameter: 250 mm Max saw blade diameter: 550 mm Parallel ruler cross section: 1350 mm Ruler with stop from the T70 model Table length: 3300 mm Speed: 2800-5000 rpm 2 axis pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

cutting diameter: 420 mm saw band length: 4870 mm cutting width: 500 x 250 mm table height: 640 mm size of profile - max.: 400 x 400 mm cutting speed: 40 - 120 m/min saw band length: 4870 x 27 x 0,9 mm total power requirement: 3,0 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,0 x 1,0 x 1,5 m Manual band saw Hydraulic saw blade tensioning Hydraulic workpiece clamping Hydraulic saw frame lift/lower Includes 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm throat: 400 mm workpiece height: mm table-size: 610 x 500 mm saw band length: 2780 - 2980 mm turning speeds: 22 - 147 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,6 x 0,8 x 1,9 m Bandsaw with - Ideal welding unit - Grinding unit - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5300 mm, 2200 mm

vertical panel saw Cutting dimension max 5300 x 2200 x 80 mm Motorized evasive rear wall Funding Strip attack

Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details.

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of angles between 45 and 90 degrees Digital Angle Displays Feed via 2-hand operation Roller conveyors and length stops on request Weight: approx. 1,000 kg

Manufacturer: SCM Type of Machine: Sliding Table Saw / Circular Saw for Panel Sizing Model:Class SI 400 EP Year of Manufacture: 2019 Technical Specifications: - Maximum cutting height at 90 degrees: 140 mm (with 400 mm blade) - Maximum cutting height at 45 degrees: 97 mm (with 400 mm blade) - Main saw blade diameter: 400 mm - Scoring blade diameter: 120 mm - Saw blade tilt: 45 degrees - Main saw blade speed: 3,000 / 4,000 / 5,000 rpm - Scoring blade speed: 8,500 rpm - Main motor power: 7 kW / 9.5 HP - Scoring motor power: 1.3 kW / 1.7 HP - Sliding carriage dimensions: 3,200 x 320 mm - Parallel fence cutting width: 1,270 mm - Suction outlet diameter (blade guard): 120 mm - Suction outlet diameter (machine base): 100 mm Control System (EASY 3 UP PLUS CE Version): EASY2 electronic control with 7-inch 16:9 monitor; suspended, orientable control panel; programmed display and control of ...

Diehl straight line rip saw Model SL-52 wide arm 54" between saw blade and column glue line quality

Technical data: - Saw blade dimensions up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds 40 + 80 1/min - Cutting range at 90° around 100 mm - flat 120 x 85 mm - Mitre adjustable on the left up to 45 ° - right up to 30 ° - Material vise - Drive 400 V / 1.0 / 1.2 kW - Space requirement approx. W 600 x H 800 x D 700 mm - Weight approx. 180 kg

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 220 x 80 mm feed length: 600 mm feed length: multiple: 1800 mm cutting speed: 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Fom Type of machine: Sawing machine combined with a cutting line system MIRAGE 600 L Sawing Machine - Model: MIRAGE 600 L - Code: XZ-10825 - Year of manufacture: 2021 - Tool speed: 2880 rpm - Maximum tool diameter: 600 mm, hole 40 mm - Electrical features: 3-phase, 400V, 50Hz - Consumption: 10 kW, 550 NL per minute - Maximum weight: 850 kg LT 600 Cutting Line - Model: LT 600 - Year of manufacture: 2021 - Electrical features: 3-phase, 400V, 50Hz - Consumption: 11 KN, 550 NL per cycl Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation