metal saw used for sale

This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine.

Sliding table saw Altendorf Type: F 90 Machine No. 81-12-195 Built in 1981 Sliding carriage length 2500 mm Motor power 4 kW Extraction hood from above Table extension and Table extension Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Saw blade speeds 3000/4000/5000/6000 rpm. Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Weight approx. 800 kg with pallet

Key data: 430 mm

Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw  ...

This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information.

Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible.

This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us.

This ANTHON CUTTING SYSTEM was manufactured in 1994. It features a Siemens S5 control system, a portal feeding system with suction crossbeam, and a saw carriage with scoring and main saws. Ideal for handling package heights up to 150 mm. If you are looking to get high quality cutting capabilities consider the ANTHON CUTTING SYSTEM machine we have for sale. Contact us for more information about this machine.

This WoodVER UPK-1 was manufactured in 2022. It features a maximum log diameter of 1000 mm and lengths from 2.0 to 6.5 m. The saw has a 550 mm diameter and operates at speeds up to 3000 rpm, powered by dual 18.5 kW motors. It includes an automatic feed, CNC remote control, and hydraulic log handling, enhancing productivity and precision. Contact us for more information about this machine.

This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information.

Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Key data: 400 mm

Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg

Band Saw Bizerba FK 23, completely in stainless steel, with portioning stop, brake, year of construction 2004, including 3 new saw blades, new scrapers, Connection 400V, dimensions LxWxH approx. 50x57x86cm, weight approx. 75kg, used, good condition, fully functional

Band saw — horizontal Cutting diameter / cutting range (round) up to approx. 250 mm diameter Cutting range rectangular / square, typically also approx. 250 × 250 mm (depending on the material shape) Saw blade length ≈ 3660 mm Saw band width / thickness (band dimension) 25 mm belt width, approx. 0.9 mm thickness (e.g. 3660 × 25 × 0.9 mm) Cutting speed adjustable approx. 20 – 70 m/min, infinitely variable Weight of the machine approx. 700 – 850 kg

This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details.

Key data: 4300 mm

older Gebr. Panel saw incl. extraction Technical data ( data according to brochure ) Saw blade diameter 300 mm Cutting depth yes depending on material 70 / 80 mm Cutting length 4300 mm Weight approx. 900 kg Space requirement approx. 6000 x 1500 x Height 2900 mm

Band saw Type: HTZ 1100 Pro Manufacturer: Mebor Year: 2020 MLD round timber conveyor Roller conveyor for sawn timber RC M800 L-P Machine in good condition, fully functional Find more here - / Contact us at -

A Schüco double miter saw for aluminum profiles is available. Saw units: 2, max. cutting length: 6000mm, saw blade diameter: 500mm, bore: 32mm, max. miter angle: 22.5°, fixed stops: 90°/45°/22.5°, min. cutting length: 300mm. Machine dimensions X/Y/Z: approx. 7500mm/1800mm/2000mm, weight: approx. 2200kg. Documentation available. An on site inspection is possible.

Technical data: - Cutting range at 90° around 260 mm - flat 260 x 260 mm - Material replenishment machine max. single stroke 600 mm - Max. section length in multi-stroke mm - Saw blade dimensions approx. 4100 x 32 x 1.2 mm - Cutting speed infinitely variable 12 - 100 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Chip conveyors - Total drive power 400 V / 8.5 kW - Space requirement approx. W 2350 x H max. 2340 x D 3050 mm - Weight approx. 3000 kg - from location D - 14943 Luckenwalde

Key data: 500 mm

Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device Instruction manual Weight: 1400 kg

Veneer Saw Scheer FM 8 - 3100 Cutting length 3100 mm Stop system with scale Extraction fan Compressed air clamping Use Machine Condition Good Prices: free loading plus VAT

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms

Code: 0295 Brand: PUTSCH MENICONI Model: SVP 620 - CE Standard Manual vertical panel saw - CE Standard Cutting lenght mm 4200 Cutting height mm 2200 Cutting depth mm 45 Motor power Hp 3 Blade diameter mm 250 Device for cutting of short pieces Overall dimensions: Mounted machine mm 5400 x 1500 x 2950 h Weight kg 900

Key data: 700 mm

Band saw Bäuerle Roll diameter 700 mm APA guides at the top and bottom! Runs great! Guided tours in a first-class condition Used machine Accessories lots of band saw blades

Offer 26053 Technical data: - Saw blade diameter 550 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 350 mm - Cutting area e.g. 90° 110 x 390 mm - or according to diagram - Inward swivel range pneumatic 90 - 45 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Space requirement approx. W 7660 x H 1600 x D 1400 mm - Weight approx. 2100 kg - with: cutting length adjustment + angle adjustment, - Separate control cabinet, cycle spraying device, - Accompanying roller conveyor,

Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 100 mm Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200

Panel Saw Striebig Type: Standard 6220 A/G Machine No. 16178 Year of Make: 1987 Cutting length 5300 mm Cutting height vertical 2200 mm Cutting height horizontal 2100 mm Cutting depth maximum 80 mm Saw blade diameter maximum 300 mm Saw blade diameter minimum 290 mm Saw blade speed 4,750 rpm. Motor power 4.4/5.5 kW Evasive slatted frame Suction nozzle diameter 100 mm With center support rails Support rollers with locking mechanism Moving extraction duct Delivery and installation possible Length 6300 mm x width 1235 mm x total height 2720 mm Room height 2860 mm Weight: approx. 950 kg

Band saw Bäuerle Type BS 70 Passage height max. 490 mm Projection/cutting width 680 mm Motor power 3 kW With stop on saw table Saw blade guide 3-roller guide top and bottom Tilting table Rubber coating on the saw rollers Saw blade rollers diameter 700 mm Saw blade length 5000 mm Dimensions approx. 1300 mm x 800 mm Height 2400 mm Weight approx. 700 kg

Metal band saw MEBA 320 DG semi-automatic hydraulic - Semi-automatic - Hydraulic operation - Infinitely adjustable band saw speed - Mitre cuts possible - Hydraulic clamping of the mitre adjustment - Hydraulically adjustable saw pressure - Fully hydraulic material clamping - Coolant device - Automatic shut-off - Emergency stop - Connection: 400 V - Cutting range: Round material: up to Ø 320 mm

Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 2000 Outfeed roller table mm 2000 Weight kg 350

HOLZMA panel sizing saw HPP 82 with plates heavy-duty loading ex site for sale.

TECHNICAL DATA: Saw blade: Ø 500 mm Installed power: 5.5 kW Accessories: 01 Infeed roller conveyor: 3000 mm (idle) 01 Discharge roller conveyor: 1600 mm (motorized)

Saw blade diameter: 450mm, Cutting height: 150mm, Bore: 30mm, Swivel: 45°, Cutting width: 1000mm, Machine dimensions X/Y/Z: approx. 3300mm/2000mm/1600mm, Weight: approx. 1200kg. An on-site inspection is possible.

A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Table size: 980 x 750 mm Tilting table Flywheel size: Ø 800 mm Saw blade length: max. 5770 mm / min. 5680 mm Installed power: 4 kW

This SCHELLING FL 430/410 panel saw was manufactured in 1997. It features a cutting length of 4200 mm, a slider of 4100 mm, and a saw blade diameter of 450 mm. The saw blade projection is 130 mm, and it can handle package heights up to 120 mm. Powered by a robust 31 kW motor, this machine offers reliable performance for your cutting needs. Contact us for more information about this machine.

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect

This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information.

This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information.

Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details.

STROMAB pendulum saw model PS50/F with: – blade diameter 500mm – useful cutting height 145mm – useful cutting length 530mm – motor kw 5.5 / hp 7.5, volt 380 – with 2+2 m roller benches Year 1996, to CE regulations

Amada model HFA 1000, built in 1999 Cutting capacity: approx. 1000 mm Square: 1100 x 1000 mm Belt drive: 11 kW Hydraulics 2.2 kW Coolant 0.25 kW Cleaning brush 0.20 kW Chip conveyor 0.20 kW Saw blade dimensions: Length 9,700 mm Width 80 mm Depth 1.6 mm Belt speed 15-80 m/min infinitely adjustable Table load 15,000 kg Accessories: electrically driven roller conveyor

Band Saw FORTE F320 -Cutting range 90 degrees / Round - 320mm -Cutting Area / Square - 300mm -Cutting area 45 degrees 220x200mm -Cutting speed 20-100 mm/min -Cutting pressure hydraulically adjustable -Material length stop -Motor 1.5 KW -Saw blade dimensions 3660x25x0.9mm -Roller conveyors -Various replacement saw blades Dimensions: LxWxH 2.2x1.2x1.6 meters / Weight 700Kg

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg

 Wood Her CUT 6120 heavy-duty precision high-performance panel sizing line Cutting length 3900 mm Cutting depth 3100 mm Saw blade protrusion 82 mm Control CUTCONTROL 2, 17" TFT screen – touch Powerful optimization software CD CUTTING SYSTEM Label Printers 3 air cushion tables 1800 x 600 mm Car. Angle pressure device up to max. 1300 mm Car. Cutting Setup Residual cutting device Cable remote control pneum. Trimming stops Main saw unit 11 kW, saw blade DM 350 mm Scoring Saw Unit 2.2 kW, Saw Blade DM 180 mm Saw carriage feed 0 - 100 m/min infinitely variable Saw carriage return 130 m/min Width stop feed 0 - 100 m/min (EU 0-25 m/min) Width stop feed - return 100 m/min Collets width stop 7 pcs. Compressed air connection capacity 6 bar Extraction connection basic machine 1 x 120 mm Suction connection pressure beam 3 x 120 mm Extraction capacity 3500 m³h Air speed 30 ...

KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG

Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with indepe ...

Band saw PANHANS BSB630 -used-swivelling table, saw blade guide APA top and bottom, cutting height adjustment via handwheel, operating pressure indicator---------- Technical data ----------roller diameter: 630 mm, cutting height max.: 320 mm, cutting width max.: 600 mm, table size: 680x780 mm, table inclination: 20 Â, belt length: 4,480 mm, motor: 2.2 kW, extraction nozzle: 2x100 mm, dimensions: L=1,200 W=800 H=2,150.