metal saw used for sale

Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting

Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Key data: 400 mm, 4800 mm, 870 mm

Metora MBS 400 - Metal Band Saw - Hydraulically controlled lowering of the saw frame - Hydraulic raising of the saw frame - Mounted on turntable Specifications - Capacity: 400 mm - Working height: 870 mm - Saw blade dimensions: 4800 x 34 x 1.1 mm - Motor power: 3.2 kW - Machine dimensions WxHxD: 2600 x 1550 x 1200 mm - Weight: approx. 1300 kg

Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200

Key data: 4300 mm, 1925 mm

Connected load 380V 7A Cutting length 4300 mm Cutting height 1925 mm Frame height 2210 mm Machine height 2500 mm Room height 2540 mm Edging height 1870 mm Passage height 1940 mm

Brevetti C15 Double-Saw Miter Saw Machine designed for 45° cutting Use for cutting: decorative frames, furniture door frames, glazing beads Saw size max/min 275/250mm Saw speed 3250r.p.m Motor power 2×1.5kw Pneumatic material pressure Pneumatic feed of the cutting deck 2x 100mm extraction port

: 400 mm weight: 1,3 t miter: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM SI12 TW saw-mill Trolley length 1500mm Undercut Up/Down Spindle Adjustment Up/down dial adjustment Blade angle adjustment up to 45 degrees Cutting width on the right side 1450mm Maximum blade diameter 300mm Milling machine spindle diameter 35mm Spindle speed 3000/4500/6000/8000/10000 r.p.m Saw Speed 4000 rpm 4kw milling machine motor 4kw saw motor Net price 15.000PLN

SPECIFICATIONS: Table size: 1100 x 900 Flywheel size: Ø 900 Saw blade: min. 6200 - max. 6400 mm Installed power: 5 HP

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

Code: 0246 Brand: OMGA Model: TR 2B NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Cutting speed: 80m/min, saw blade dimensions X/Y/Z: 2760mm/27mm/0.9mm, miter range: 60°/45°, working height: 950mm, cutting range X/Y: 280mm/150mm, max. cutting diameter: 230mm. Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 350kg. Documentation available. An on site inspection is possible.

An Inova saw for cutting paper cores is available. Paper core length range: 50mm-2000mm, paper core inner diameter: 400mm-500mm, wall thickness range: 15mm-30mm, max. payload: 30kg. Machine dimensions X/Y/Z: approx. 3500mm/1000mm/1850mm, weight: approx. 1600kg, control: Siemens HMI. Dokumentation vorhanden. An on-site inspection is possible.

Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

TECHNICAL SPECIFICATION   max. cutting height: 150 mm   sawband length: 3660 mm

A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible.

Cutting length: 4,300 mm Control: Power Control Scoring saw: 2.2 kW Cutting depth: 2,200 mm Software: CADmatic 4.0 Saw blade guard: 95 mm Collets: 7 pieces Main saw blade: 350 mm Scoring saw blade: 180 mm Air table: 4 Saw carriage speed forward: 1 - 150 m/min Saw carriage feed return: 150 m/min Program slider feed flow: 90 (EU max. 25) Program slide feed return: 90 m/min Main motor: 13.5 kW equipment: Central angle pressure device Label printer integrated into print bars Completely gloomy machine table Automatic pressure beam height control Automatic cutting height Adjustable contact pressure pressure beam (soft-touch package) Adjustable Contact Pressure Collets (Soft-Touch Package) 5 to. Lift table 1 Power-Concept collet (can be positioned independently of the program slider) Speed Package Groove program Label printer PICA 108 Auction-ID: A7-32339-3

A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 6400x1500x1780 mm Total power requirement: 19 kW Weight: 1800 kg Control: Arbeits- und Platzersparnis, sicherer Betrieb.Kombinierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 370 mm Cutting Area at 90° round: 120 mm Square: 100 mm Rectangle: 180 x 100 mm at 45° round: 120 mm Square: 100 mm at 60° round: 110 mm Square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Space requirement: 1000 x 1000 x 1800 mm Weight: 390 kg

Sawblade tiltable: ° cutting width: mm Motor output: kW Cutting height: mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

For sale is a high-quality table saw of the brand Ulmia, type 710 SN, serial number 10708, built in 1995. The machine comes from the renowned German manufacturer Ulmia and impresses with its robust design, precision and durability - ideal for carpenters, workshops or demanding craftsmen. Details: Manufacturer: Ulmia Type: 710 SN Serial Number: 10708 Year of Make: 1995 Operating voltage: 380 V The table saw is in used, functional condition and has always been used reliably. Ulmia machines are known for their precise cutting performance and solid construction, which makes this saw a stable and powerful solution even today. Ideally suited for precise longitudinal and cross-sections in the professional woodworking sector. Viewing and test run possible by arrangement.

Manufacturer: HOLZHER Model: 1255 Year of Manufacture: 2011 TECHNICAL DATA Weight: 920 kg Condition: Machine is fully functional Operating manual: Available Maximum cutting length: 6300 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2200 mm Maximum workpiece thickness: 60 mm Horizontal feed height: cutting height Maximum horizontal feed height: 2040 mm Power supply: 400 V / 50 Hz Find more here - / Contact us at -

A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.

Key data: 45 °, 1350 mm

TECHNICAL DATA: Carriage length: 1350 mm Saw blade: Ø 300 mm Saw blade inclination: 0 - 45°

Key data: 300 mm

TECHNICAL DATA: Saw blade: Ø 300 mm Installed power: 3 hp EQUIPMENT: 02 Infeed and outfeed roller conveyors, each with a length of 1900 mm

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Year: 2018 technically efficient, ready to work – after full service motor power: 2.2 kW disc diameter: 400 mm (cross-cut) machine head can be moved 45° to the right and left head tilt 45° to the left pneumatic profile clamps pressure reducer cooling system

TECHNICAL DATA: Saw blade width: 400 mm Installed power: 5.5 kW Hydraulic operation EQUIPMENT: Hydraulic power unit (Tecno Tubi - OL95/132)

Band saw with 700 rollers Ready for operation on site

Band saw Bizerba FK 32, built in 2018, Machine completely in stainless steel, with brake, Connection 400V, dimensions LxWxH approx. 80x78x160cm, weight approx. 126kg, good used condition, fully functional

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction

A vertical panel saw Striebig is available. Cutting length: 4600mm, cutting width: 2070mm, cutting thickness: 60mm, vertical cutting position spacing: 1000mm, saw blade diameter: 250mm, motor power: 3kW, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 5750mm/1500mm/2850mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.

Sawmill with log band saw with flywheel 1000 mm Attachment to clamping carriages with pliers

Nikmann Log Band Saw, Model HBB 550 L Maximum cutting diameter: D 550 mm max. board width 530 mm max. cutting length our standard 6 m Track length 6.9 m Maximum saw blade stroke: 540 mm Minimum saw blade height from track: 20 mm Saw blade dimensions: 3200 x 27 x 0.9/1.0 mm Recommended band saw blade FB for softwood X Cut with every 3rd tooth with stellite Maximum cutting thickness: 220 mm Cutting length: 6 m, expandable in 2.3 m increments Minimum cutting length: 0.9 m Engine power: 4 kW/5.5 hp Flywheel diameter: 400 mm Flywheel width: 25 mm Saw blade dimensions: 3200 x 27?33 x 0.9

Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg

Angle system for panel dividing 4300 mm x 2200 mm Year of manufacture 2000 Ex-works not dismantled (lombardia)

Track length 6 m Hand Feed Saw motor 5.5 kw

For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm  - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Automatic Pneumatic Workpiece Clamp  Cutting height 280 mm at 90 Cutting height 140 mm at 30 mm Engine power 11KW/15hp Separating cuts Mitre cuts  Schifter cuts, longitudinal sections  Throat rafters, eaves planks, Burrs, cutting wedge planks Roller conveyor strong version right  incl. roller table and longitudinal stop L=2500 mm side-movable Roller conveyor strong version left  incl. roller table and longitudinal stop L=2500 mm side-movable

The Spt model is equipped with an automatic loading system with lift table and slider  and collets  Furthermore, the machine has a pre-warehouse of plates Panel dimensions up to 4400 x 2200 mm

Cutting height 90 246 mm Cutting height 45 165 mm Cutting height 30 113 mm Fuse 32A Speed 3000 rpm Saw blade D650 mm

miter: ja cooling: ja weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Manufacturer: MEP Type: Cobra 352 NC 5.0 Year of Make: 2017 Control: Volution TS50 Cutting speed: 1,700 / 3,400 rpm Saw blade diameter: 350 mm Cutting performance Round tube: 120 mm Square tube: 105 / 100 mm Rectangular tube: 180×70 / 135×60 mm Solid material round: 50 mm Solid material square: 80 / 55 mm Solid material rectangular: 160×35 mm Dimensions and weight Dimensions: 1,750 mm x 2,360 mm x 1,700 mm Weight: approx. 600 kg Condition Condition: Used Functional: Tested and fully functional

Key data: 400 mm, 2200 mm

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm 2 saw motors Motor power 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2500 mm 2 front stop rails 1 piece length 1200 mm, 1 piece length 2400 mm With extraction connection and pipe Including 10 saw blades with a diameter of 400 mm Weight approx. 1300 kg Shipping Dimensions 3900 mm x 1300 mm x H 1200 mm