127,864 used machines on RESALE, but how to find them? Machine Search
Key data: 440 mm, 120 mm
Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm
Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc
Offer 23402 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Infinitely variable belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - With: - Saw blade welder IDEAL -Lighting
Bone band saw BIZERBA FK22, manufacturer = Bizerba type FK22, 220/ 380 V, 1,080 KW, untested! Auction-ID: A7-45675-30
OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw blade diameter 550mm Pneumatic material clamping Pneumatic saw passage Saw control with two buttons 7.5kw main motor 2x roller tables length 160cm each CE Certified White Paper
Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used.
Key data: 530 mm
Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual
Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992
with 2 pcs. roller conveyor Auction-ID: A7-45452-19
Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 7,5 Kw Main rotation speed 3900 rpm Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300
SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998)
SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - carriage mm. 3800 - Cutting width 1270 mm on parallel fence - motor 7.5kw - year 2006 (CE)
Code: 0360 Brand: GMC - ITALY Model: KGS 400/E - CE Standard Manual vertical panel saw with scoring unit for cutting panels, furniture, customer made furniture, kitchens, plastics, composite materials, aluminium and various – CE Standard Technical specifications: Cutting length 3200 mm Cutting height 1900 mm Cutting thickness 50 mm Blade diameter 250 mm Hole 20 Motor 4 Hp Scoring unit for chip-free cutting - Blade diameter mm 110 Hole 20 Circular saw shaft speed 4800 rpm Scoring saw shaft speed 7000 rpm Retractable tilting intermediate support, half-length Automatic mechanical moving frame Double lower and upper measuring index for horizontal cuts Overall dimensions of assembled machine mm 5100 x 1100 x 2800 h Overall dimensions for transport: Frame mm 5100 x 460 x 2250 h + Beam mm 2900 x 850 x 850 h Weight kg 450
SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002
SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996
SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999
saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.
Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm
used
Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.
AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600
Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with ...
From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm
Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.
Key data: 360 mm
Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--
Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317
- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head
Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Key data: 300 mm
SPECIFICATIONS: Saw blade diameter mm: 300 Bore mm: 30 Max. material thickness at 45?: 60 mm Installed power: 3.0 KW Revolutions: 3000 rpm Max. cutting width mm: 600 Complete with 2 roller tables of 3500 mm and 1500 mm with electronic positioning stop 2 Pneumatic stops
ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg
Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)
Vertical Trend and Slit Band Saw Fabr. Raimann Type B 11 Built in 1983 Roller diameter 110 mm Roll width 100 mm Speed -580 rpm Engine 18.5 Kw Cutting width R/L of sheet-200 mm each Cutting height 200 mm Feed continuously variable 10-40 m/min 1.5 kw Band saw blade length 6300-6500 mm Electro-motor blade clamping Pneumatic roller slide adjustment
Table dimensions 1080 x 700 mm, 30? tiltable Wheel diameter 800 mm. Wheel width 40 mm. Max. cutting height 350 mm. Max. cutting width 660 mm. Cutting length: 5620 mm. Motor power 4 kW. Extraction nozzle diameter 120 mm.
Cutting capacity: 4300 mm x 4250 mm. Sawblade height: 95 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 5-130 m/min. Returnspeed 130 m/min. Programm fence speed: 80 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1050/1850/2650/3450 mm. Machine control: CADmatic 4 air tables of 2160 x 650
Key data: 400 mm, 180 mm
Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.
Cutting height:150 mm saw band length:2400 mm cutting width:350 mm total power requirement:380 V weight of the machine ca.:350 kg dimensions of the machine ca.:800 x 950 x 1650 mm
maximum number of results exceeded
please refine your search
30 € 
