metal saw used for sale

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4200 mm, 115 mm

Panel Saw with Lift Table Loading Scheer Type: PA 7004 Year of Make: 1999 CE with automatic lift table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, Linux operating system with PA software S5 Cutting length 4200 mm Travel of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade protrusion 135 mm Panel Saw Size FM22 Main saw blade diameter maximum 450 mm Scoring saw blade diameter maximum 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher 30 m/min in the flow, 70 m/min in the return. Remaining section device SP5004 Saw motor 11 kW, scoring 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lift table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front Air Cushion Support Tabl ...

Key data: 6500 mm, 100 mm

Horizontal panel sizing saw Longitudinal saw with 6,500mm cutting length Panel dimension 6,300mm Main saw motor 35KKW frequency-controlled Feed speed saw carriage 5-80m/min. Max. saw blade diameter 550mm with 130mm protrusion Saw blade deviation sensor Cut-gap closers Pressure device 2,600 - 100mm Material tray 6,300mm Extension to 10,900mm 9 Parcel jammers 4 Cross aligners Pressing device 100- 2,600mm, approx. 2,000mm behind the cutting line Pressing device 100- 2,600mm, approx. 4,000mm behind the cutting line Electronic Control PC6200 Machine Tables Air Cushions with Steel Nozzles 1 angle table 2,600x1,000mm with angle stop rail 4 side table 2.600x800mm More information on request!

saw blade diameter: 400 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 200x60 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 140x60 mm total power requirement: 1,5 kW weight of the machine ca.: 130 t dimensions: 0,8 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm : 180 x 100 mm Working height: 925 mm saw blade turning speeds: 15 - 150 U/min total power requirement: 5,5 kW weight of the machine ca.: 0,615 t dimensions of the machine ca.: 1,4 x 1,4 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M.Nr. AE/030883 Year of Make: 2007 Motor data: 380 V - 50 Hz - 38 A Type: SEZ. MON. E Cutting dimensions: 3200 mm x 3200 mm Scoring Weight approx.: 2400 kg Equipment: 1 x Front fixed table with guide 1500×600 mm, air cushion 2 x Front fixed table 1500×400 mm, air cushion Automatic switching off of the scoring saw blade Main saw blade motor 7.5 kW (10 hp) Star-delta start-up for main saw blade motor Groove design with manual adjustment of the main saw blade 3D simulator on the machine Graphical editor Cutty – Cut Optimization Software PC Machine feet / pedestals Electrical equipment A.E.V400/50 "N" with microswitch, scoring cut-off, 0YD, grooves

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,210 t dimensions: 0,9 x 1,4 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 450 mm : 650x450 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 5320 x 34 x 1,1 mm total power requirement: 3,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,9 x 2,87 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range: 90°: 90 mm cutting range: 45°: 75 mm Saw blade diameter: 315 mm Table dimensions: 800 x 500/400 mm Saw blade: 30 mm machine weight ab.: 45 kg dimensions: 850 x 600 x 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number: 7807 SPECIFICATIONS - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table top dimensions 1900x790mm - height from the base to the tabletop 830mm -in advance - 2 rows of ratchets/fluffers - 2 Slip Rollers, Smooth, Metal - shaft with saws - 2 sliding rollers, pressure – from below - guide strip - Ratchets/Fluffers -caterpillar - Electric body height adjustment - central lubrication - Infinitely variable speed control on the inverter - 4kW feed motor - main motor 75kW - Diameter of the extraction port 2x150mm - overall dimensions l/w/h 2050x1800x1800mm - weight about 3500kg ADVANTAGES – German production – DTR documentation – used multi-saw – very good condition Net price: 58900 PLN Net price: 14024 EUR depending on the price 4.20 EUR  ...

saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number: 7805 SPECIFICATIONS - track width 340mm - shaft width 340mm - blade hole diameter 80mm - 350mm discs on the upper shaft - mounted discs on the lower shaft 300mm - max cutting height 200mm - min length of the processed material 700mm –in advance - 2 rows of flingers - smooth, slippery, pressure shaft - Flingers - 2 slip shafts, smooth, pressure shafts - shaft with saws - 3 pressure rollers, smooth – from below -caterpillar - shaft with saws -caterpillar - infinitely variable feed speed regulation - main motors 2x approx. 55kW - 3kW feed motor - Electric body up/down lifting - manual adjustment of shafts with saws - central lubrication - Extraction port diameter 2x200mm - dimensions l/w/h 2700x1800x2150mm - weight about 5000kg ADVANTAGES – German production – twin-shaft – 2x55kW motor – used multi-saw, very goo ...

Pendulum circular saw Irion with roller conveyor Cutting height 100 mm Roller conveyor left 2m Roller conveyor right 3.5 m L x W x H: with roller conveyor 6.0 x 1.2 x 1.5 m Weight approx. 450 kg Year of construction 1965 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Part Number: 7804 SPECIFICATIONS - track width 350mm - shaft width 330mm - 300mm disc fitted - max blade diameter 400mm - blade bore diameter 70mm - max cutting height at the blade 400mm, 150mm - table top dimensions: 2240x770mm –in advance - Flers/ratchets - Slide shaft - Flingers - smooth, sliding roller - shaft with saws - 2 sliding rollers, pressure shafts – from below - roller in front of the countertop -Guide -Triggers -caterpillar - central track lubrication - electric shaft lifting with 0.75kW saws - electric body lifting 0.75kW - infinitely variable feed speed regulation - Diameter of the extraction port 320mm - main motor 45kW - overall dimensions l/w/h 2280x1820x2040mm - weight 2850kg ADVANTAGES – Czech production – used multi-saw – DTR documentation – very good condition Net price: 62900 PLN Net price: 149 ...

Part Number: 7806 SPECIFICATIONS - track width 300mm - Shaft width 200mm - max cutting height 100mm - max blade diameter 300mm - blade hole diameter 60mm –in advance - 2 rows of ratchets/fluffers - smooth pressure shaft, sliding - shaft with saws - smooth pressure shaft, sliding – from below -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - main motor 22.37kW - central lubrication - table top dimensions l/width 1430x700mm - Diameter of the extraction port 150mm - dimensions l/w/h 2100x1450x1400mm - weight 1311kg ADVANTAGES – Italian production – very good condition – used multi-saw Net price: 29900 PLN Net price: 7119 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

see pdf attached

Manufacturer Producer Saacke Typ type UW2 CNC Year of construction Construction year 1989 Steuerung control Sinumerik Machine size machine size 3500x3000x2500 mm Spannung Voltage 400 V Machine weight machine weight approx. 2.5 t

SPECIFICATIONS: 45° glass strip saw Machining area mm: 2,700 x 1,000

JRIMAC Circular Saw/Multifunction Saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left – right/ right – left - Flexible and rational working - Air cushion table for pleasant processing of sheet goods - 90° – Stop ruler for cross-cut cuts - Collets for optimal processing of sheet material - Force-guided pneumatic hold-down device with zero-cutting device - Various options for incision initiation - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade – quick clamping system "JRIMAC" - High level of occupational safety -Friendly - Cutting accuracy +/- 0.5 mm

: 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 280x200 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 180 mm capacity 45 degrees: flat: 180x180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 110x110 mm dimensions of saw-band: 2950 x 27 x 0,9 mm output: 1,5 / 1,8 kW Weight: 435 kg dimensions: 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Sulak PTS325F is a powerful vertical saw designed for cutting laminated glass and other specialty glass types. Here are the key specifications and features: Technical Specifications Maximum glass thickness : up to 60 mm Cutting types : o Normal glass o Laminated glass o Fire-resistant glass o Bulletproof glass o Cutting angle : o Straight cut (90°) o Fixed angle of 45° via simple mechanical switching o Cutting direction : Vertical from top to bottom o Cutting speed : Adjustable via frequency converter ( 0.1 – 1.6 m/min ) o Cooling system : Closed circuit with tank, water pump, nozzles and collection system Dimensions : approx. 3650 × 1900 × 4600 mm o Power supply : 3×400 V (or 3×230 V), 50/60 Hz o Power : 3.3 kW o Weight : approx. 1110 kg o Noise level : 78 dB o Saw blade diameter : 350 mm or 400 mm Maximum cutting lengt ...

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

CML 2-blade mobile multi-blade rip saw model SCA320 2R T350 , with separation line and return of pieces to the operator: – machine management from a separate control panel, with: CNI electronic programmer 2 joysticks for managing the 2 units with moving blade Variable feed speed (inverter), with digital display motorized positioning of the blade unit, with digital display Motorized positioning of the presser, with digital display Motorized positioning of the machine infeed guide – 1 fixed blade + 2 mobile recirculating blades – 1 fixed laser + 2 mobile lasers, for cutting lines – 350mm belt, 320mm useful cutting width – blade diameter from 220 to 350/360mm max – useful cutting height with 360mm mobile blades: 100mm – useful cutting height with 350mm movable blades: 95mm – useful cutting height with fixed sleeve and 350mm blades: 120mm – blade moto ...

Key data: 800 mm

Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg

Holtec parcel cross-cut saw Type: VARIOCUT SHK Year of Make: 1989 Parcel cross-cut saw with movable parcel roller conveyor Positioning control with length input with measuring point Stationary cross-cut unit Cutting width 1300 mm Package height 1200 mm Highest cutting accuracy thanks to saw set guided on both sides Input roller conveyor 5400 mm long Forward / return 2 speeds With 12 wheels Output roller conveyor 5000 mm long Forward / return 2 speeds With 21 wheels Electrical positioning control with length measuring point by means of measuring trolley Width of roller conveyors 1200 mm both roller tables driven Connected load 11 kW / 21.5 A Ready for immediate use and immediately available Dimensions 10700 mm x 2700 mm x H 3400 mm

Very high quality under-table double miter circular saw machine with manual saw blade feed – for cutting profiles and solid material made of aluminium – non-ferrous metal – plastics – wood and other soft materials Optionally available with roller conveyor and manual measuring stop with digital display. Largest saw blade diameter 620 mm Cutting Area - Examples - 90° - 130 mm x H 125 mm 90° - 80 mm x H 145 mm 45° - 100 x H 130 mm Infinitely variable miter adjustment +/- 20° Saw blade drive power 2.2 kW Dimensions approx. 0.9 x 1.2 m x H 1.6 m (with open protective cover) Weight approx. 350 kg

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

Altendorf WA6 Format circular saw new Format sliding table: 2600mm Engine power: 400V 4 KW (5.5 hp) Saw blade: 315mm swivel: 90°-45° Pre-scoring unit: with engine 0.37 KW (0.5 HP) For wood, plastic and non-ferrous metal G&AL-WA6-2600 ASSEMBLED CHECKED AND MEASURED! SPECIAL PRICE Format sliding table:also in 1600mm SPECIAL PRICE Accessories: Saw blade pendulum protection (upper protection) for saw blade 350mm

Key data: 430 mm, 5200 mm

Band saw machine Bauer SA 430 ZA with accessories Year of construction 2009 Serial number 09-98002 Space requirements: Dimension L 3110 mm W: 2210 mm H 2400mm Total machine weight approx. 2,500 kg Electr. Connection 400V Motor power 4 KW Coolant pump yes Hydraulic pump yes Sawing area: 430mm Saw blade dimensions 5200 x 43 x 1.3 mm Cutting speed: Infinitely variable Saw blade guide: deflection rollers and carbide jaws Material tension: hydraulic Saw frame stroke: hydr. Cutting pressure control Material feed: manual, hydr, automatic pliers Accessories: roller belt, chip conveyor, express lowering, preselection of cutting pressure and force via touchscreen on the control panel, storage for cut parts, saw blades >5 pieces, SIGMA 5200x43x1.3 mm available Ready to use.

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

Saw blade chamfering machine Manufacturer: Loroch Type: AK Year of construction: 1991 For chamfering HSS and segment circular saws