metal saw used for sale

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-19

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-18

Consisting of 3 gitterboxes with various sizes of plastic blocks 2 metal stacking bins, various sizes of plastic blocks and various Auction-ID: A1-50251-427

Auction-ID: A7-50270-175

Contents of canopy consisting of wire steel gitter boxes, crate pallets with various metal, welding screens Auction-ID: A1-50251-395

Hardening oven Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Workspace: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW Auction-ID: A1-40982-78

Wooden compartment cabinet with various metal parts and accessories. Including welding jigs, hinges, plates Auction-ID: A1-50251-27

Consisting of 4 corner profiles with slotted holes, length approx. 70x20 cm 2 metal bins with lifting eyes, 1 of which has a lid dimensions approx. 100x81x67 cm Auction-ID: A1-50251-385

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-17

Consisting of: H-beams, corner profiles, tube, tube, flat steel in and with cantilever rack, old iron box and mesh box. The visible roller conveyors are not included. Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-389

Consisting of: H-beams, corner profiles and frames Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-393

Consisting of: H-beams, roller conveyor, corner profiles and parts of a casting mold Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-392

Metal frames, frame parts, beams and the like As well as gitterbox with steel and crate pallet with steel Tipping bucket with content Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-397

Consisting of: dismantled overhead crane, H-beams, corner profiles, scaffolding parts wheels and various small scrap metal Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-402

equipped with profile steel base base; capacity around 11 mm; capacity flat 5 mm; Auction-ID: A1-44050-25

Various rod material, foam strips and profiles Auction-ID: A1-50251-309

Consisting of 4x metal trestle with contents of various metal including beams, tube Garden bench, canteen chair and wooden side tables Contents of old iron container Gitterbox Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-383

Complete coating line including: Feeder Mailander 460 coater, year 1981 GAS oven 30m, year 2000 Double stacker Bundle turner Max sheet format 1145x980 Upgraded with pneumatic system for feeding

Technical specifications of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 3 mm.Maximum cutting capacity in stainless steel 1.8 mm.Shape of the stamp, rectangle The HBM E nibblers are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50523-753

DIN 338, 5% Co, 1.0-13.0mm, high quality drill bit set in metal box, new Auction-ID: A1-40421-162

DIN 338, 5% Co, 1.0-13.0mm, high quality drill bit set in metal box, new Auction-ID: A1-40421-159

Fitted with: Anilam Wizard 350 Plus digital readout (DRO) Table power feed Machine vice Large selection of R8 collets and tooling as pictured Coolant system 2HP variable-speed head R8 spindle 380V 3-phase power The machine is in great condition throughout and has been well looked after.

Auction-ID: A7-50403-164

USM Haller Side Table 50 × 50 × 35 cm – graphite black Original USM Haller side table in grid size 50 × 50 cm, height 35 cm: open construction with top plate and shelf in graphite black, chrome-plated tubular steel frame with the typical USM ball connectors, on adjustable feet. Versatile as a side table, coffee table or bedside table – timeless Swiss design classic. Dimensions as USM pitch (center tube), outer dimensions slightly larger. Auction-ID: A1-50585-43

Mixed lot consisting of 5 used bar stools / counter chairs. The chairs have an upholstered seat with grey fabric cover, a wood-look backrest and a black metal frame with footrest. Suitable for bar, café, bistro, kitchen, counter or gastronomy. Details: Quantity: 5 pieces Seat: upholstered, fabric cover grey/brown Backrest: wood look Frame: black metal Design: Bar stool / counter chair with footrest Auction-ID: A1-50584-219

USM Haller Side Table 50 × 50 × 35 cm – graphite black Original USM Haller side table in grid size 50 × 50 cm, height 35 cm: open construction with top plate and shelf in graphite black, chrome-plated tubular steel frame with the typical USM ball connectors, on adjustable feet. Versatile as a side table, coffee table or bedside table – timeless Swiss design classic. Dimensions as USM pitch (center tube), outer dimensions slightly larger. Auction-ID: A1-50585-42

Large modern dining table with solid wood-look top and sturdy black metal frame. Rectangular table top with natural wood grain. The frame is designed as a central cross/X frame and ensures a stable stand. Suitable for dining room, gastronomy, office or meeting room. Details: Design: Dining table / conference table Table top: wood look / solid wood look Frame: metal, black Shape: rectangular Condition: as good as new Special features: stable X-frame, large table surface, modern design Auction-ID: A1-50584-222

USM Haller Side Table 50 × 50 × 35 cm – pure white Original USM Haller side table in grid size 50 × 50 cm, height 35 cm: open construction with top plate and shelf in pure white, chrome-plated tubular steel frame with the typical USM ball connectors, on adjustable feet. Versatile as a side table, coffee table or bedside table – timeless Swiss design classic. Dimensions as USM pitch (center tube), outer dimensions slightly larger. Auction-ID: A1-50585-41

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

For e.g. Festool plunge saw, Detail: 1 x 160 x 2.2 x 22 mm. - 24 teeth, 1 x 160 x 2.2 x 22 mm. - 36 teeth, 1 x 160 x 2.2 x 22 mm. - 48 teeth. Circular saw blades set 3 -piece 160mm for e.g. festool plunge saw Auction-ID: A1-40898-77

Technical data Manufacturer: Husqvarna AB Type: FS 400 LV Product Ref: 967796501 Serial Number: 2021 2130056 Power: 8.7 kW Weight: 102 kg Max. saw blade diameter: 500 mm Saw blade speed: 3,000 rpm Drive: Combustion engine Configuration Hand-held floor cutter or concrete saw with chassis, cutting depth adjustment via handwheel, front guide indicator, saw blade protection and emergency stop. Auction-ID: A7-50403-30

Auction-ID: A1-44050-82

Good condition New air bellows Auction-ID: A1-50540-39

Unaudited Auction-ID: A1-50540-179

Good condition Auction-ID: A1-50540-118

Top condition New air bellows Auction-ID: A1-50540-42

Cutting width approx. 700 mm Cutting height approx. 150 mm Saw blade diameter 500 mm Engine power approx. 4.0 kW hydraulic saw blade stroke