metal pipe used for sale

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 560 x 220 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working height from to: 600 - 1150 mm : 1200 kg weight: 495 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

Very few working hours: approx. 200 h Technical and visual condition: very good+ Pictures attached Price: 16.000 EUR net ExW Heavy welded steel construction Horizontal and vertical work possibility All three rollers driven by hydraulic motor and planetary gear Hardened rolls Hydraulic delivery via two lower rollers Lateral mechanical straightening rollers, infinitely adjustable Separate control panel with foot control and 2 digital displays Bending performances profile type optional Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 Bending performances profile type standard Square material dimensions [1] 45 mm Square material min. bending Ø [1] 500 mm Square material dimensions [2] 15 mm Square material min. bending Ø [2] 380 mm Flat material l ...

saw blade diameter: 355 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 125 x 125 mm capacity 90 degrees: flat: 170 x 110 mm turning speeds: 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees: - 45 / + 0 total power requirement: 3.5 kW weight of the machine ca.: 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts ...

A tray sealer MetalTech is available. Materials: plastic trays/aluminium trays, max. tray dimensions X/Y: 325mm/265mm. An on-site inspection is possible.

Band Saw Machine Metallkraft BMBS 300x 320 CNC BJ 2022

Technical data of the pallet rack crossbar: Shelving System: Metal Sistem Type: Unipal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Manufacturer: COMUNA-Metall Model: 2726-02 Type of Machine : CHP Plant Nominal Heat Load: 156 kW Thermal Output: 92 kW Electrical Output: 50 kW Operating Voltage: 230/400 V, 3-phase, 50 Hz Fuse Rating: NH00, 100A Connection Pressure: 20–80 mbar Max Operating Pressure: 6 bar Operating Temperature: 100/70 °C Protection Class: IP54 Certification: DIN DVGW Find more here - / Contact us at -

width of the strips: 75 mm band length: 2000 mm band speed: 36 m/min total power requirement: 4 kW weight of the machine ca.: 82 kg dimensions of the machine ca.: 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tilta ...

tube diameter: 42.0 x 3.0 STAHL mm tube diameter: 30.0 x 2.0 EDELST mm bending angle max.: 180 ° bending radius max.: 100 mm bending speed: 2.0 U/min. Control: NC voltage: 400 V total power requirement: 0.55 kW weight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An automatic meat tenderizer roller tenderizer Metalquimia is available. Design: needle-/roller, theoretical throughput capacity: approx. 8500kg/h, machine dimensions X/Y/Z: approx. 2000mm/1300mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible.

This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine.

Mesutronic Metal detector with sorter, type: FC 01 BA 3.1.1, serial number: 1013 FC, year of manufacture: 2013, 230 V, 50 Hz, plastic belt, belt width: 80 mm, pass-through: 130 mm x 205 mm, overall dimensions: 2050 mm x 990 mm x 1500 mm., Safeline Metal detector with exchanger, passage: 200 mm x 350 mm, plastic belt, belt width: 120 mm, overall dimensions: 1600 mm x 900 mm x 1650 mm., Metal detector by Thermo Electron Corporation, Serial number: 06132547, plastic band, band width: 260 mm, passage: 300 mm x 100 mm, overall dimensions: 1200 mm x 900 mm x 1500 mm., Metal detector of the Thermo Electron Corporation , Model: SPECGKDSP3NAS, Serial number: 6277, Year of construction: 2005, plastic band, band width: 250 mm, passage: 300 mm x 100 mm, overall dimensions: 1400 mm x 1100 mm x 1500 mm., Goring Kerr Limited mobile pipeline metal detector, Type: D.S.P2, Serial number: 57423, Year of ma ...

This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine.

General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...

This METAL TECHNIKA OWD-1600 was manufactured in 2018. It features a GOT3000 Mitsubishi controller and excels in full optimization of 30 dimensions across two quality grades. It supports various cutting programs and can handle input material widths from 12 to 250 mm and heights up to 120 mm. Central oil lubrication ensures smooth operation. Consider the opportunity to buy this METAL TECHNIKA OWD-1600 Optimizing Cross-Cut Saw. Contact us for more information about this machine.

This Metallkraft HTBS PRO 3113 was manufactured in 2022. Its a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine.

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately

sheet width: 2050 mm plate thickness: 3.0 mm distance between columns: 2100 mm back stop - adjustable: 550 mm no. of strokes: 35 Hub/min cutting angle: 2°12 table width: 400 mm table height: 850 mm Control: konv. total power requirement: 3.0 kW weight of the machine ca.: 1280 kg dimensions of the machine ca.: 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge stepless adjustment range adjustment from behind - by handwheel including mm scale max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control) The data for this ad was created with ModulMWS - the software  ...

filling amount: 250 l basket dimensions: 550 x 270 x 75 mm dimensions of the machine ca.: 1,25 x 0,85 x 1,24 m BALTIC METALL - 6957 Dive Wash Unit - Immersion Tank Dimensions: 595 x 395 x 500 mm - Draining Area Dimensions: 470 x 350 mm - 2x Storage Rack Dimensions: 480 x 360 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.

Brush sander WOODLAND MACHINERY with metal brush (new) Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11.57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

Holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, holder -Manufacturer: PGH Metall, holder type 50 60 19 with reamer -Hole: Ø 20 mm -Reamer: Ø 35 mm -Dimensions: Ø 50 x 390 mm -Weight: 1.1 kg

Pneumatic diaphragm pump with pressure multiplier. New equipment

General SKUR1406 LocationBarneveld CEcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface8 m2 Specified Features - Nutsche filter Capacity17035 ltr With jacket(85 ltr), (66 ltr) Max. temperature-30/200 degr. C Without drivecheck MaterialStainless steel 1.4435 (316L) Information MakeSolme, Societa Lavorazione Metalli (It) Mach.No.9384 Year of construction2015 Floorspace4,0x4,0 M Weight8400 KgNutsche filtersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceuticalAPIMinerals & inorganicAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered foodsOils & fatSolme, Societa Lavorazione MetalliFilters > Nutsch ...

Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but ...

General SKU026E105 MakeEvans Universal Ltd. Leeds No.2042 Year of construction1999 Mounted on framecheck Specified Features - Drying oven Drying ovenZinc crucible furnace (1x) Number of compartments:1 Internal diameter425mm Internal height450mm, Inlet dia. 300mm Gas heatingBurner make Riello, type 40 GS 5 (120 KW) Information LocationBarneveld With switchgearcheck Floorspace4,2x2,1 M Total height2,3 M Weight2300 KGDiscountDrying ovensEvans LeedsDiscountDryers > Drying ovensBrand > Evans Leeds What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Crossing pipes in different lengths and wall strands in stock Price depending on wall thickness and length

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. Pipe cutting and chamfasing machine Make GF GEORG FISCHER type RA41 (orbitalum) specifications: Tube outsend diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270rpm. Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate and chassis used, in good condition.

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.

The scope of delivery includes: 01x Rectangular tube, used Profile dimensions: approx. 50 x 30 mm Material color: orange Total length: approx. 3,660 mm Center-center hole: approx. 3,630 mm Material thickness: approx. 1.50 mm Number of boreholes: 2 pcs. Drill holeØ: approx. 10 mm Weight / pcs.: 6,150 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5)

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

The scope of delivery includes: 01x Rectangular tube, used Material colour: orange Overall length: approx. 1,980 mm Center – center hole: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (WxH) Material thickness: approx. 2.00 mm Borehole Ø: 9 mm Weight: 5.04 kg | Pcs. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.