136,441 used machines on RESALE, but how to find them? Machine Search
Vacuum Membrane Press AS Metal Transform Manufacturer: AS Metal Ağaç Makinaları San. Tic. Ltd. Şti. Model: Transform Machine code: MBPR06 Year: 2018 Serial number: 1801-002 Industrial vacuum membrane press for forming and laminating workpieces. Heavy-duty machine with enclosed pressing chamber, pressure/vacuum vessel, sliding loading table, safety guarding and separate operator control panel. The sliding worktable/platen is approximately 2,500 mm long. Power: 45 kW Electrical supply: 380 V, 3-phase, 50 Hz Required compressed air pressure: 6–7 bar Hydraulic system: Oil-operated Hot-oil system: Transfer oil Approx. dimensions (L × W × H): 4,500 × 3,000 × 2,800 mm Weight: 6,370 kg Condition: Used. All descriptions, technical specifications, dimensions and other information are indicative only. Auction-ID: A1-50546-21
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for thermoforming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2102-004 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic controls, vacuum system, heated pressing section, operator control panel and perimeter safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-27
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated upper press section, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,370 kg All descriptions are indicative only. Auction-ID: A1-50546-22
Makita LW1400 Abrasive Cut-Off Saw Portable stationary abrasive cut-off saw for cutting metal profiles, tubes and bars. Manufacturer: Makita Model: LW1400 Year: 2016 Power: 2,200 W Cutting wheel diameter: 355 mm Electrical supply: 220–230 V, 10 A, 50–60 Hz No-load speed: 3,800 rpm Certification: CE marked Application: Cutting metal profiles, tubes and bars Condition: Used Approximate dimensions: 530 × 295 × 640 mm Approximate weight: 17 kg All descriptions are indicative only. Auction-ID: A1-50546-85
Foldable; with the door that opens; for wooden Europallet; 1200 x 800 x 1000 mm; without pallet; Auction-ID: A1-50377-118
Voltage: 220 V, Rated power: 2.000 W, No-load speed: 1.500 rpm, Rectangular section cutting capacity at 0º: 158 x 80 mm, Square section cutting capacity at 0º: 100 x 100 mm, L-section cutting capacity at 0º: 110 x 110 mm, Rectangular section cutting capacity at 45º mitre: 85 x 85 mm, Square section cutting capacity at 45º mitre: 85 x 85 mm, L-section cutting capacity at 45º mitre: 85 x 85 mm. 2023 Auction-ID: A1-50595-10
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg Auction-ID: A1-40324-90
Variable snelheid____ with additional saws ____ conveyor 1 Auction-ID: A3-46133-2835
Power 2500W Max Cutting Size 100mm Blade Dia 265 mm Constant rpm 1900 rpm AC220v Auction-ID: A1-40324-122
Foldable; with the door that opens; for wooden Europallet; 1200 x 800 x 1000 mm; without pallet; Auction-ID: A1-50377-117
3-door metal locker, a central vertical partition and an upper shelf in each compartment. Grey exterior and blue interior. Visible rust, scratches and paint wear. Auction-ID: A1-50699-2
Metal storage cabinet with internal wooden shelves. Grey finish with visible rust, scratches, paint wear and dust accumulation. Auction-ID: A1-50699-6
In fully functional condition with additional parts. Auction-ID: A3-46133-17280
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg Auction-ID: A1-40324-136
3-door metal locker, compartments and hinged doors. Ventilation slots in the doors and internal upper shelves. Grey painted finish with visible rust, scratches and peeling paint. Auction-ID: A1-50699-3
Power supply: 380-400 V, 3 ph, 50-60 Hz, Spindle speed: 45/90 RPM, Motor power: 1,3 -1,8 kW, Saw blade outer diameter: Ø250 mm, Saw blade bore diameter: Ø40 mm, Saw blade thickness: 2.5 mm, Number of teeth: 240. Auction-ID: A1-50595-27
Power supply: 380-400 V, 3 ph, 50-60 Hz, Spindle speed: 45/90 RPM, Motor power: 1,3 -1,8 kW, Saw blade outer diameter: Ø275 mm, Saw blade bore diameter: Ø40 mm, Saw blade thickness: 2.5 mm, Number of teeth: 240, Min. processable profile length: 150 mm. Cutting blade not included. Auction-ID: A1-50595-7
diameter: - mm workpiece length: beliebig mm work piece width: 1500 mm Sanding height max.: 100 mm speeds of grinding spindle: 400-1600 stufenl. U/min feed stepless: 1 - 5 m/min rated capacity: 4 x 2,2 KW Dust suction hood: 200 mm total power requirement: ca. 9 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,9 x 2,4 x 1,9 m Deburring and chamfering system for stamped and laser-cut parts. The Discmaster 4Td is equipped with two large deburring discs and two chamfering discs, which oscillate multiple times over the entire workpiece.|This unique technology enables cost-effective chamfering of stamped and laser-cut parts and offers significant advantages over conventional machines. Machine: 2 disc units on the infeed side, á 250 mm, 2.2 kW drive, separate height adjustment - 2 disc units on the outfeed side, á 250 mm, 2.2 kW drive, separate height adjustment - Transver ...
Equipped with 1 shelf, Without content. Complete with low model 120 x 80 x 24cm Auction-ID: A1-50226-111
Application: The system is a roll-to-roll inspection system for stainless steel foil Applications: Unwinding of the film material (film thickness: 50-200 - film width: 200-600 mm, wet inspection on both sides by means of spray nozzles, drying of the nose shot by means of IR radiation Material: continuous material (metal foil, plastic film), consisting of spray coating, drying oven, two laser modules (2x1kW IPG laser) and process technology Including: 2 x decoiler/recoiler, year of construction: 2024, type: SRA1000-505D-SP, weight: 390 kg 2 x control panels-Dell and Beckhof IR control, type. CX 40 with nominal power 40 kW, connected load 40 kVA-3/N/PE - AC 50 Hz-400 V Transport dimensions: approx. 11 m long, 2.20 m wide, 2.60 m high, modules are equipped with rollers and hoes, The rollers allow easy movement of the heavy equipment, while the integrated machine feet provide stability Weigh ...
Equipped with 5 drawers and shut-off flap Auction-ID: A1-50226-135
Power 2500w Blade Dia 185 mm Voltage AC220v Max Cutting size 63mm Constant rpm 1900rpm Auction-ID: A1-40324-137
Saw adjustable in degrees Auction-ID: A1-50750-10
New Trapezoidal Steel Sheet T-35 – RAL 9006 Trapezoidal steel sheet T-35 for roofing and wall cladding applications, made of coated steel. Specification: Profile: T-35 Length: 6,500 mm Thickness: 0.5 mm Color: RAL 9006 (white aluminium) Coating: protective + anti-condensation (felt) Anti-Condensation Layer: absorbs moisture prevents water dripping reduces corrosion risk protects structure and stored materials Packaging & Delivery: Sheets secured for transport. Auction-ID: A1-50711-53
Metal detector on its own conveyor, This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes., The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/lock-met-30-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Belt: Modular plastic belt, Controls: Display with selection keys, stored product programmes, Construction: Stainless steel, frame on castors
Metal detector with conveyor and reject bin, This Goring Kerr metal detector (later part of Thermo) checks products for metal particles as they pass through the detector head on the belt. Products found to contain metal are rejected from the belt into the stainless steel reject bin., Belt and detector share a frame on castors, with their own control box for start, stop and emergency stop. We have not been able to confirm the model or year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/goring-kerr-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Reject: Reject bin beside the belt, Belt: Blue plastic belt, Controls: Own control box with start, stop and emergency stop, Construction: Stainless steel, frame on castors
Weighing and metal inspection in one machine, The Mettler Toledo Garvens XS 3 CC weighs every pack in motion and also checks it for metal, using a Mettler Toledo Safeline metal detector in the line. Packs that are under- or overweight or contain metal are pushed off the belt into the reject bin., The rating plate shows it was built in 2011, serial number 35002725, weighing range up to 1000 g., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/mettler-toledo-garvens-xs-3-cc-checkwei gher-with-metal-detector/, Type: Checkweigher with metal detector, Weighing range: Up to 1000 g, Metal detector: Mettler Toledo Safeline, Profile control, Reject: Pusher with reject bin, Controls: Touchscreen
Loma IQ3 metal detector on conveyor, built in 2022, This Loma IQ3 metal detector is mounted on its own conveyor with a 300 mm wide modular belt and a reject bin. The aperture is 350 × 100 mm (w × h), the belt is 2,300 mm long. The detector is operated via the touchscreen on the detector head., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2022-loma-iq3-metal-detector/, Type: Metal detector with conveyor, Aperture: 350 × 100 mm (w × h), Belt width: 300 mm, Belt length: 2,300 mm, Dimensions: Approx. 2,300 × 900 × 1,450 mm (l × w × h)
Minebea Intec metal detector on conveyor, built in 2021, This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2021-minebea-intec-metal-detector-conve yor/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,100 mm, Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)
Sartorius MDP+ metal detector on conveyor, built in 2009, This Sartorius MDP+ metal detector is mounted on a mobile stainless steel conveyor with a 350 mm wide modular belt. The aperture is 400 × 165 mm (w × h), the belt is 2,060 mm long. The detector is operated from the keypad panel on the detector head; the conveyor has its own control box., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2009-sartorius-mdp-metal-detector/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,060 mm
Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Mitre adjustable left + right up to 30° - Cutting range at 90° round + square 140 mm - Rectangle 210 x 120 mm - at 45° round + square 120 mm - at 30° round + square 105 mm - Cutting speeds infinitely adjustable 10 to 80 m/min - Feed speed of the saw blade hydr. infinitely variable - Pneumatic vise / vice - Coolant device + micro spray system - Discharge roller conveyor with dimension stop 3000 mm - Roller conveyor feed 3000 mm - Pneumatic connection 6 bar - Drive 400 V / 4.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 1000 kg
MESUTRONIC MN 5.1 CI 225/225 – Industrial Metal Detector MESUTRONIC MN 5.1 CI 225/225 industrial metal detector, designed for control and detection applications in industrial environments. This equipment enables the detection of metal particles in production and quality control processes. It is suitable for manufacturing lines and environments requiring metal contaminant monitoring. Features: Brand: MESUTRONIC Model: MN 5.1 CI 225/225 Type: Industrial Metal Detector Year: 2011 Serial Number: 2011-1141-CI Power supply: 100–240 V Current: 50–300 mA Frequency: 50/60 Hz Dimensions (L x W x H): 65 x 35 x 50 cm Weight: 110 kg Equipment sold as is. Professional equipment that may show traces of use related to its industrial operation. Auction-ID: A1-50714-4101
Work table and adjustable saw blade guide. Table Length: 500 Table width: 500 The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-9
Condition: used and unchecked. Auction-ID: A1-50891-44
STILCRAM ORM sheet metal bending cylinder 1070x110. 3-roller machine. Working length: approx. 1,070 mm.Maximum sheet thickness: 4 mm.Diameter of the upper roller: approx. 110 mm.Motor power: 2.2 kW. Electrical connection: 380 V.Year: 2022. Approximate dimensions (L x W x H): 2,250 x 800 x 1,100 mm.Approximate weight: 850 kg.The dimensions and weight indicated are approximate values and should be considered as a guideline. According to the information provided, the machine has very few hours of use and all maintenance has been carried out. According to the seller, the machine was in good working order as of 13/11/2024. Possibility of loading onto a truck by overhead crane available on the premises. Condition and content as shown in the photographs. Auction-ID: A7-49809-10
Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...
Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite
working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden
working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden
maximum number of results exceeded
please refine your search
2.500 € 
