metal pipe used for sale

diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...

diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit  ...

material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine number: 4818 Operating voltage: 400 V Frequency: 50 Hz Rated current: 1.5 A Grinding wheel diameter: approx. 250 mm Auction-ID: A7-49089-377

This 6-axis DÖRRIES SCHARMANN Heavycut 1.2 TDV4 was manufactured in 1989. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 2,500 mm with a maximum table load capacity of 25,000 kg. If you are looking to get high-quality boring capabilities, consider the DÖRRIES SCHARMANN Heavycut 1.2 TDV4 boring machine we have for sale. Contact us for further details.

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain iTNC 530 spindle speed:: 6000 1/min. spindle taper: CAT-50 ISO spindle drive: (S1) 10 kW table surface area: 1300 x 600 mm table load: 1200 kg feed speeds: 1-10000 mm/min rapid travel x/y/z: 20/20/15 m/min distance table - lower edge spindle: 125-725 mm total power requirement: 25 kVA weight of the machine ca.: 7,5 t dimensions of machine: 3600 x 2300 x 3000 mm Equipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h ...

Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...

work piece width: max 145 x 150 mm band speed: 1.0 - 8.0 m/min workpiece height: max. 100 mm total power requirement: ca. 5.5 kW weight of the machine ca.: 900 kg. dimensions of the machine ca.: 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDG ...

Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1398.6 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 € : 2895.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

Machine number: 1042455 Cutting length: approx. 3000 mm incl. right roller conveyor Roller conveyor length: approx. 2000 mm Roller conveyor width: approx. 350 mm Roller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156

Ponscapaciteit: 80 ton Diameter x plaatdikte: 31 x 20 mm / diameter 60 x 10 mm / diameter 100 inch 6 mm Keeldiepte: 510 mm Maximale snijdikte in plaat: 500 x 20 mm / 400 x 19 mm Bladlengte: 510 mm Hoekstuk van 90° afgesneden: 150 x 150 x 12 mm Hoek van 45° afgesneden: 100 x 100 x 12 mm Rond op lengte gesneden: 50 + 25 mm Op maat gesneden vierkant: 50 + 30 mm Weight: 3 ton

Metal Detector Manufacturer: LOMA Type IQ2 emc Belt width 20 cm Height of the passage 12 cm Documents available in German With conveyor belt and ejector

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 € : 160.19 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1500 mm : 1400 mm : 1850 mm : 345 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 8680 € : 167.52 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1550 mm : 1400 mm : 1900 mm : 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 € : 199.1 € : Schwenkrahmen : 3120 mm : 35/70 m/min : 280 mm : 240 mm : 350x140 mm : rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm : 1550 mm : 1400 mm : 1750 mm : 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 € : 212.54 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1400 mm : 1800 mm : 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 € : 175.24 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1600 mm : 1400 mm : 1950 mm : 356 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 8 mm, 6 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centr ...

material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...

Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,

Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine -Manufacturer: Ferm 7, Metal band saw -Type: BZ-175 -Drive: 0.75 kW -Cutting capacity 90°: Round 180mm, Rectangle 260x180mm -Cutting capacity 45°: Round 115mm, Rectangle 115x180mm -Saw band speed: 70-110, 150-195 m/min -Saw blade: 2360 mm -Transport dimensions: 460/1230/H990 mm -Weight: 140 kg

Lg.Nr. 26301 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° to around 130 mm - Square 120 mm -flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° to around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade - Infinitely adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - hydr. Material vise with hand crank for fine adjustment - Infinitely adjustable clamping pressure - 2 pieces of hydraulic retainers - Micro spray coolant device - Original discharge - roller conveyor with dimension stop 4000 mm - Roller conveyor feeder 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

ponsdop: diameter 28 x 15 mm / diameter 38 x 11 mm Snijkap: 200 x 20 mm / 300 x 15 mm Hoekafschuifkap: 90° 120 x 120 x 12 mm / 45° 80 x 8 mm Stalen breekijzerkap: diameter 35 / 40 mm Inkepingskap: 100 x 42 x 10 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: 28 x 15 mm Max punching dia: 110 mm Power needed: 4 kW Length: 1510 mm Depth: 590 mm Height: 1570 mm Weight: 1440 kg

Professionally dismantled and stored - all that remains is to be packed and loaded safely for transport Auction-ID: A1-50085-11

WITH 6 SHELVES (BLIND DEFECTIVE) 2 SHELVES, 2 PCS TOOL CARRIER SHELVES HSK 63 Auction-ID: A1-50085-113

Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.

Automatic metal detector, battery powered, never used Overall dimensions: 1070 x 270 x 170 mm Weight: 10 kg Auction-ID: A7-50208-116

et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-161

et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-261

Automatic metal detector, battery powered, never used Overall dimensions: 1070 x 270 x 170 mm Weight: 10 kg Auction-ID: A7-50208-280

et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-61

Power: 0.75 kW per conveyor Year: 2022 Manufacturer: Ortbauer Metall- und Maschinenbau GmbH Model: Siebanlage Stand Alone PS 2.0 Serial No.: 1121-4-01-2 / 21144/11 / 4211 0065-0066 Features: Stand-alone screening system with control cabinet, two conveyors and Topoz motorization, 3×230/400 VAC 50 Hz power supply, 24 VDC control, 16 A current rating, IP54. Dimensions (mm): est. 6000 x 3000 x 3500 Weight (kg): est. 1200 Auction-ID: A1-50223-104

• Incl. left roller conveyor • Roller conveyor width: 240 mm

Stock No.: 4051 TIN SHISS Manufacturer: DURMA, Type: SB 3006 Serial No.: 6076064556, Year of manufacture: 2006 Specifications: Size scissor length 3100 mm Size sheet thickness 6 mm Total power 15 kW Hydraulic.                          Programmatically controlled backgauge. 800 Dimensions: Length: 3100 mm, Height: 1950 mm, Width: 3850 mm, Weight: 6900 kg

Additional technical specifications: • Digital display: available • Roller conveyor: available • Roller conveyor length: approx. 3000 mm

Additional technical specifications: • Cutting dimensions round: 325 mm • Square: 325 mm • Rectangle: 380 x 325 mm • Bundle cutting: 300 - 190 mm • Width and height: 140 - 70 mm • Speed: 20 - 100 m/min • Clamping pressure: 23 kg/cm² • Feed length hydraulic mode, NC automatic single stroke: 403 mm • Multiple stroke: 99 mm • Remnant piece: 50 mm • Hydraulic tensioning with automatic saw band breakage detection

Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V

• Incl. roller conveyor and roller stand • roller conveyor width: approx. 260 mm

Incl. grindstone and welding band device.

BEHRINGER HBP 340/700 G Metal Band Saw Manufacturer BEHRINGER Model HBP 340/700 G Year 1990 Condition untested Location 63843 Niedernberg DE Lot 50

BERG & SCHMID PBS 124 ESC Assembly Band Saw Manufacturer BERG & SCHMID Model PBS 124 ESC Condition untested Location 35614 Aßlar DE Lot 57

• Incl. roller conveyor on the left • Roller conveyor width: 400 mm

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : 1900 € : 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm : 45 / 90 m/min : 225 mm : 180 x 245 mm : rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm : 1.1 kW : 1500 mm : 700 mm : 1400 mm : 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day  ...

: gebraucht : 2023 : 6242 : prompt, Zwischenverkauf v : Italien : 5400 € : 1 : Schwenkrahmen : 2450x27x0,9 mm : 35/70 m/min : 220 mm : 220 mm : 260x140 mm : rund 160 mm, quadrat 155 : rund 95 mm, quadrat 95 mm : 965 mm : 1200 mm : 1100 mm : 1860 mm : 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Detail ...