metal lathe used for sale

USED HARDINGE CONQUEST 42 CNC lathe Bar diameter: 42 mm Diameter above the bed: 269 mm Diameter above the carriage: 180 mm Distance between tip: 350 mm 1 Main spindle with C axis Spindle speed: 50 to 5000 RPM Stroke: X 135 mm - Z 353 mm 1 Turret / 12 stations Equipped with 1 FANUC O-TC CN 1 Programmable counter point 1 Chip conveyor 1 LNS 6/42 hydraulic tubeMachine dimensions and weight : 3200x1500xH1600mm - weight 3200kg - LNS6/42: 4800x800xH1400mm - weight 700kg Auction-ID: A1-50950-23

Centre distance 1.100 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross-slide Ø 180 mm Max. Swing in Gap Ø 480 mm Spindle bore Ø 40 mm R.P.M. 33 – 1,500 (12x) KW 4 Volts 380 Cycles 50 Accessories: Quick change toolpost Coolant Auction-ID: A1-50718-18

CAPACITY: Swing over bed: 630 mm Swing over saddle: 500 mm Recommended turning diameter: 255 mm Max. turning diameter: 420 mm Max. turning length: 1,030 mm Bar working diameter: 76 mm TRAVELS: X-axis travel: 242 mm Z-axis travel: 1,100 mm MAIN SPINDLE: Spindle speed: 3,500 rpm Spindle nose: ASA A2#8 Spindle bearing diameter: 130/120 mm Spindle through hole diameter: 86 mm Min. spindle indexing angle (C-axis): 0.001° TURRET: No. of tool stations: 12 OD tool size: 25 mm Boring bar diameter: 40 mm Indexing time: 0.15 sec Rotary tool spindle speed: 5,000 rpm TAIL STOCK: Quill diameter: 100 mm Quill bore taper: MT#5 Quill travel: 100 mm FEEDRATE: Rapid traverse (X/Z-axis): 20/24 m/min MOTORS: Main spindle motor: 18.5/22 kW Rotary tool spindle motor: 5.5 kW Feed motor (X/Z-axis): X: 3.0 / Z: 4.0 kW Coolant pump motor: 0.4 kW POWER SOURCE: Electric power supply: 40.6 kVA  ...

USED CITIZEN M32 CNC lathe Bar diameter: 32 mm Max. turning length: 320 mm Spindle power: 3.7 / 5.5 kW Spindle speed: 10,000 rpm Turret: 20 stations with Y-axis Machine weight approx.: 3200 KG Equipped with 1 CN MITSUBISHI MELDAS 1 Lubrication pump tank 1 Fire suppression system 1 Hydrofluid HP pump unit Dimensions and weight Machine: 4000x2000xH1800mm - Weight 3500kg + 1 pallet 600x600 Weight 200kg + 1 Pallet 1200x1200mm Weight 250kg Auction-ID: A1-50950-9

Center height 160 mm, center width 650 mm, MK 3 tailstock, connected load 3 kW, nominal current drive motor 7 A, incl. digital display, MULTIFIX \"A\" base holder, GARANT 160 three-jaw chuck, interchangeable jaws and interchangeable wheels Auction-ID: A1-50626-10

USED CITIZEN M16V CNC LATHE Year: 2007 Bar diameter: 16 mm Max. turning length: 320 mm Spindle power: 3.7 / 5.5 kW Spindle speed: 10,000 rpm Turret: 20 stations with Y-axis Equipped with 1 Mitsubishi Meldas CN 1 Lubrication pump tray 1 Fire suppression system 1 HP COOL BLASTER CB510 pump unit 1 Chip conveyor 1 IEMCA BOSS 332E/R 44LL bar feeder (4 meter bars) Dimensions and weight Machine: 4000x2000xH1800mm - weight 3500 kg - Bar feeder: 5000x800xH1400mm - weight 800kg + 1 pallet 600x600 weight 200 kg + 1 pallet 1200x1200mm weight 250kg Auction-ID: A1-50950-8

Machine is equipped with: - chip conveyor - tailstock - tool setter - collet chuck - mist filter Auction-ID: A1-50690-10

USED OKUMA LCC15 2S CNC LATHE Serial No.: 0311 Year: 12/1998 Main spindle Max diameter above bed: 200 mm Diameter above carriage: 320 mm Max turning diameter: 260 mm Spindle speed: 35-4200 rpm Chuck clamping Ø160mm - 3 jaws Turret 2 Turret / 8 stations Equipped with 1 CN OKUMA OSP 1 Chip conveyor Dimensions and weight 4400x2000xH2400mm - weight 5000 kg Auction-ID: A1-50950-63

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-50718-32

Machine is equipped with: - tailstock Auction-ID: A1-50690-23

USED CNC LATHE INDEX 170 M Serial No.: 24932 Spindle bore: 42 mm Max. diameter above the bed: 370 mm Distance between tips: 450 mm Longitudinal stroke of the carriage: 150 mm Stroke of the cross carriage: 400 mm Spindle speed: 4000 rpm Number of positions on the turret: 14 rotating tools Equipped with 1 FANUC series 21i-T CNC clamping on the main spindle1 Set of fixed and rotating tool holders 1 LNS HYDROBAR hydraulic tube Machine dimensions and weight : 3800x2200xH1800mm - weight4500kg - LNS tube: 4800x800xH1300mm - weight 500 kg Auction-ID: A1-50950-33

USED NAKAMURA SC300L CNC LATHE Serial No.: L301603 Working hours: 4524 hours Main spindle Bar diameter: 71 mm Turning diameter: 350 mm Max turning length: 1100 mm Spindle speed: 6000 rpm C-axis: 360° indexing increment 0.001° Counter-spindle Spindle speed: 6000 rpm C-axis: 360° indexing increment 0.001° Turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X=222 mm - Z=1135 mm - Y=+/- 45 mm Equipped with 1 FANUC 18i-TB CNC 1 HAINBUCH 2701/0011 clamping clamping on the main spindle 1 HFKN 165/46 chuck clamping on the sub-spindle 1 Set of fixed and rotating tool holders 1 Workpiece recuperator 1 Chip conveyor Dimensions and weight Machine: 4650x2200xH2250mm - conveyor: 5300x1500mm - 2 pallets - total weight 5400 kg Auction-ID: A1-50950-56

USED BIGLIA B470 YSM CNC lathe Serial No.: 9957 Year: 2007 Main spindle Bar diameter: 68 mm Max. turning diameter: 200 mm Max. turning length: 300 mm Spindle speed: 100-4000 rpm Spindle bore: 80 mm spindle nose: ASA 6'' C-axis: 360° indexing increment 0.001° Sub-spindle Maximum bar diameter: 42 mm Max turning diameter: 160 mm Max turning length: 200 mm Spindle speed: 100-4000 rpm Spindle bore: 56 mm spindle nose: ASA 5'' C-axis: 360° indexing increment 0.001° Upper turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 165 mm - Y: +60/-40 mm - Z: 380 mm Lower turret Number of positions: 12 Number of motorized positions: 12 Axis travel: X: 147 mm - Z: 240 mm Equipped with 1 FANUC 18i-T CNC 1 Parts collection belt 1 Tool measuring arm 1 Set of fixed and rotating tool holders 1 Chip conveyor Dimensions and weight Machine:5000x2200xH2000mm - Total weight ...

USED MORI SEIKI NZ2000 T2Y CNC LATHE Year: 2010 Number of cutting hours: approx. 19,500 hours Main spindle Bar diameter: 65 mm Max. turning diameter: 310 mm Max. turning length: 810 mm Spindle nose: JIS A2-6 Spindle bore: 73 mm Spindle power: 25/22 kW Spindle speed: 5000 rpm C-axis: 360° Indexing Increment 0.001° Counter Spindle Bar Diameter: 65 mm Spindle Nose: JIS A2-6 Spindle Bore: 73 mm Spindle Speed: 5000 RPM C-Axis: 360° Indexing Increment 0.001° Upper Turret Number of Positions: 16 Number of Motorized Positions: 16 Axis Travel: X=210 mm - Y=110 mm - Z=300 mm Lower Turret Number of Positions: 16 Number of motorized positions: 16 Axis stroke: X=210 mm - Y=110 mm - Z=810 mm Equipped with 1 CN MORI SEIKI MSX 701 IV 1 Clamping in collet on both spindles 1 Tool measuring arm 1 Workpiece retrieval arm 27 Fixed tool holders 1 Rotating tool holder 1 Chip conveyor 1 IEMCA MASTER  ...

CNC SINGLE COLUMN VERTICAL BORING MILL Inv. No.: 12.769D1 Make PITTLER Model PV1600 Control SIEMENS 880 Year of Manufacture 1995 Max Swing Ø 1600 mm Table diameter 1500 mm Z-Travel 800 mm X-Travel 1600 mm B-axis 360,000 Table speeds 2.8 – 450 rpm Driven tooling speed 0 – 5000 rpm Driven tooling type SK50 Rapids 12 m/min Motor 90 KW Electrics 440V – 3Ph – 50 Cycles Dimensions 9200 x 6900 x 4740 mm Weight of Machine 31500 KG Including: A.T.C., 20 Positions Flood Coolant Through spindle coolant Interlock guards Twin swarf conveyor Auction-ID: A1-50718-5

USED HARDINGE GT-CE CNC LATHE Serial No.: GT-753-B Main spindle Bar diameter: 27 mm Diameter above bed: 300 mm Spindle nose: A2-4 Spindle power: 3.7 kW Spindle speed: 60-6000 rpm Axle travel: X=281 mm - Z=304 mm Equipped with 1 FANUC 18-T CNC Dimensions and weight 1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.

sliding headstock CNC lathe, year 2012, 16311 operating hours, CNC 31i-MODEL B5. Used machine. More info & price on IndustrialBuyer.

including turntable diameter 500 mm; chuck 4 jaws diameter 460 mm; vise jaw width 130 mm; machine clamp 125 mm; machine clamp 155 mm; clamping table; various clamping blocks and clamping plates; including profile steel rack with top and bottom shim; Auction-ID: A1-50476-19

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50798-327

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50798-309

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50798-256

overhauled; chuck 3 jaws diameter 160 mm; Easson X-, Y-, Z-axis readout; tool holder; Auction-ID: A1-50476-5

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50798-251

Acu-rite X and Y axis readout monitor, automatic thread cutter, without chuck Auction-ID: A1-50476-12

SCHAUBLIN 102-80 ist eine Werkzeugmacherdrehbank von hoher Präzision mit großer Genauigkeit und Zuverlässigkeit. Arbeitsmaße: Spitzenhöhe 102 mm, Spitzenweite 375 mm, Drehdurchmesser über Planschlitten 120 mm, über Bett 200 mm. Technische Daten: Spindel 12 Stufen 40–3000 t/min, Spannzange Typ 20 W, Reitstockkegel 2 CM, Spindelmotor 1.5 CV, Anschluss 50 Hz 3x 380 V, Gesamtleistung 2 CV, Gewicht ~500 kg, Abmessungen L1200×B600×H1300 mm. Erreicht enge Toleranzen; Einsatzbereiche: Uhrenbau, Automotive, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50799-454

X-axis: 293mm Z-axis: 1350mm Y-axis: -65° ~ +65° C-axis: 0,001° Machine us equipped with: - live tooling (5,5kW, 5000rpm) - Y-axis - tailstock - steady rest - chip conveyor - tool setter - coolant filtration system Auction-ID: A1-50690-1

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-24

OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-22

Self-centering chuck 3 jaws Rohm 400 mm Independent chuck 4 jaws Rohm 600 mm Running glasses 30-200 mm Fixed Seat with Rollers 40-215mm Fixed Glasses with Rollers 210-390 mm Sony digital readout 2 axis Multifix quick-change holder type D Fixed center Rotating center Pivot bus Manual & drawings German language Manual English Auction-ID: A1-47366-171

Maximum turning diameter above bed: 930 mm Maximum rotation diameter above cross slide: 630 mm Center distance: 5000 mm Spindle nose: Bayonet DIN 55027 K11 Spindle bore: 96 mm Spindle Speed: 8-800 (24) rpm Main drive: 22 kW Dimensions W x D: 2050 x 2200 mm Extras: Clamping plate 400 mm self-centering 3-jaw Clamping plate 800 mm independent 4-jaw Conical Turning Attachment Movable support 260 mm Fixed support with roller inserts 20-400 mm Fixed support with roller inserts 350-580 mm Sony digital readout 2-axis Tool holder Multifix D1 Tool holders 1 piece Cooling system Machine manual and drawings (German language) Auction-ID: A1-47366-175

FANUC Series 18i-TB control, with TOP AUTOMAZIONI FU350SX bar feeder - year 2024 Excludes machining media, tools and air filter above the machine AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-21

12-position turret, 500GH spindle, MORI SEIKI MSD-501II control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-14

DL-35M motorized turret, FANUC Series Oi-TF control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-13

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50796-454

FANUC Series 32i-MODEL B control, with bar feeder TOP AUTOMAZIONI XF365 Excluding machining supports, tools and above-machine air filter AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-20

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

turning diameter over bed:2600 mm turning diameter over slide rest:2200 mm turning length:5000 mm faceplate:2050 mm number of spindle speeds:0,7 - 70 rpm total power requirement:ca. 22 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm

turning diameter:570 mm turning length:1000 mm dimensions of the machine ca.:3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

turning diameter:270 -300 mm turning length:710 mm total power requirement:43 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.

turning diameter:220 mm turning length:310 mm total power requirement:17 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:2,25 x 1,63 x 1940 m greates pass round over bed:430 mm bore diameter:45 mm centre distance:687 mm slide travel radial ( X-axis ):160 mm slide travel axial ( Z-axis ):310 mm spindle turning speed range:0-6.300 U/min

turning diameter:220 mm turning length:700 / 665 mm total power requirement:17 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,63 x 1,98 x 1,94 m greates pass round over bed:430 mm Part length max.:510 slide travel radial ( X-axis ):160 mm bore diameter:45 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

turning diameter over bed:350 mm turning diameter over slide rest:240 mm turning length:800 mm Spindle RPM:40 - 2000 in 8 Stufen 1/min total power requirement:3 kW Spindle bore:26 mm tailstock quill taper MT:MK 2 dimensions of the machine ca.:1,5 x 1,0 x 1,6 m weight of the machine ca.:1,9 t Very well maintened center lathe with accessories - 3-jaw, 4-jaw chuck - tailstock with center - 1 boring head - RAPID quick tool change device with 3 holder - saddle mounted steady rest - collant device - set of collets appr. 75% size B 32

turning diameter over bed:500 mm turning diameter over slide rest:310 mm turning length:1500 mm spindle turning speed range:7 - 710 U/min feed range:5,6 - 224 mm/min total power requirement:15 kW weight of the machine ca.:3,7 t dimensions of the machine ca.:2,9 x 1,4 x 1,6 m Machine with 2-axis digital readout - MULTIFIX quick tool change device - 3-jaw chuck

turning diameter over bed:1000 mm turning diameter over slide rest:750 mm turning length:3000 mm weight of the machine ca.:12 t dimensions of the machine ca.:6x2,5x1,8 m spindle bore:110 mm turning speed range:900 U/min Year:1986 Equipment: - Coolant device - 1 static steady rest - 1 rotating steady rest - Faceplate 1.000 mm - Digital display - Rapid traverse