metal lathe used for sale

Key data: 120 mm, 1 mm

- Max. belt width – 120 mm - Sheet thickness - 0.1 – 1.0 mm (40 kp/mm2) - Speed 6 - 36 m / min - ( 10 cm - 60 cm/ s ) - Guideline Cross section – 100 mm2 - Conveyor inlet – left - Control – Start-Stop - Roller mill adjustment – motorized - Mobile version - Drive 0.55/0.75 kW - 750 / 1400 rot/ min - Original documents Btto – 400 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

6 pallets with a.o. Welding plates, lifting shafts, corner pieces and the like Auction-ID: A1-50251-61

As well as frame and rear wall on 2 shipping containers (used as a shelter) Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-357

Technical data Manufacturer: Behringer Type: HBP 220 Design: horizontal metal band saw machine Dimensions L × W × H: approx. 1,900 × 1,100 × 1,800 mm Weight: approx. 1,500 kg Configuration With workpiece clamping device, saw blade protective covers, pressure indicators, adjustable saw feed, separate control console with push buttons, main switch and emergency stop as well as machine light. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-50403-16

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-150

Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-356

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-19

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-18

Consisting of 3 gitterboxes with various sizes of plastic blocks 2 metal stacking bins, various sizes of plastic blocks and various Auction-ID: A1-50251-427

Auction-ID: A7-50270-175

Contents of canopy consisting of wire steel gitter boxes, crate pallets with various metal, welding screens Auction-ID: A1-50251-395

Hardening oven Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Workspace: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW Auction-ID: A1-40982-78

Wooden compartment cabinet with various metal parts and accessories. Including welding jigs, hinges, plates Auction-ID: A1-50251-27

Consisting of 4 corner profiles with slotted holes, length approx. 70x20 cm 2 metal bins with lifting eyes, 1 of which has a lid dimensions approx. 100x81x67 cm Auction-ID: A1-50251-385

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-17

Underfloor miter saw with feed and discharge conveyor As well as wall board with tools Auction-ID: A1-50251-307

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-149

Consisting of: H-beams, corner profiles, tube, tube, flat steel in and with cantilever rack, old iron box and mesh box. The visible roller conveyors are not included. Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-389

Consisting of: H-beams, corner profiles and frames Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-393

Consisting of: H-beams, roller conveyor, corner profiles and parts of a casting mold Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-392

Metal frames, frame parts, beams and the like As well as gitterbox with steel and crate pallet with steel Tipping bucket with content Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-397

Consisting of: dismantled overhead crane, H-beams, corner profiles, scaffolding parts wheels and various small scrap metal Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-402

Auction-ID: A1-47364-113

equipped with profile steel base base; capacity around 11 mm; capacity flat 5 mm; Auction-ID: A1-44050-25

Various rod material, foam strips and profiles Auction-ID: A1-50251-309

Double mitre metal band saw with Pehu 550 control With inlet roller conveyor dimensions approx. 155x73 cm And removal roller conveyor approx As well as wooden stairs Auction-ID: A1-50251-21

Consisting of 4x metal trestle with contents of various metal including beams, tube Garden bench, canteen chair and wooden side tables Contents of old iron container Gitterbox Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-383

Complete coating line including: Feeder Mailander 460 coater GAS oven 30m Double stacker Bundle turner Max sheet format 1145x980 Upgraded with pneumatic system for feeding

Set of 5 packs each with 2 door handles, i.e. 10 handles in total. New products packaged in blister packs. Auction-ID: A1-50192-75

Set of 8 packs each including 2 white wooden and metal door handles, for a total of 16 handles. Auction-ID: A1-50192-77

Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-50403-159

Technical specifications of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 3 mm.Maximum cutting capacity in stainless steel 1.8 mm.Shape of the stamp, rectangle The HBM E nibblers are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50523-753

Auction-ID: A7-50403-164

Set of 4 packs each including 2 metal door handles, for a total of 8 handles. Auction-ID: A1-50192-74

ALMA model console table in wood and black metal, equipped with two storage drawers. Dimensions: 100 × 75 × 30 cm. Auction-ID: A1-50192-82

DIN 338, 5% Co, 1.0-13.0mm, high quality drill bit set in metal box, new Auction-ID: A1-40421-162

DIN 338, 5% Co, 1.0-13.0mm, high quality drill bit set in metal box, new Auction-ID: A1-40421-159

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...