metal lathe used for sale

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1398.6 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 € : 2895.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm

Machine number: 1042455 Cutting length: approx. 3000 mm incl. right roller conveyor Roller conveyor length: approx. 2000 mm Roller conveyor width: approx. 350 mm Roller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156

Mini muffins pans 24 molds cups 18\" x 12,5\" total 60 pans Auction-ID: A7-49776-2

Ponscapaciteit: 80 ton Diameter x plaatdikte: 31 x 20 mm / diameter 60 x 10 mm / diameter 100 inch 6 mm Keeldiepte: 510 mm Maximale snijdikte in plaat: 500 x 20 mm / 400 x 19 mm Bladlengte: 510 mm Hoekstuk van 90° afgesneden: 150 x 150 x 12 mm Hoek van 45° afgesneden: 100 x 100 x 12 mm Rond op lengte gesneden: 50 + 25 mm Op maat gesneden vierkant: 50 + 30 mm Weight: 3 ton

Metal Detector Manufacturer: LOMA Type IQ2 emc Belt width 20 cm Height of the passage 12 cm Documents available in German With conveyor belt and ejector

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 € : 160.19 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1500 mm : 1400 mm : 1850 mm : 345 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 8680 € : 167.52 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1550 mm : 1400 mm : 1900 mm : 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 € : 199.1 € : Schwenkrahmen : 3120 mm : 35/70 m/min : 280 mm : 240 mm : 350x140 mm : rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm : 1550 mm : 1400 mm : 1750 mm : 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 € : 212.54 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1400 mm : 1800 mm : 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 € : 175.24 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1600 mm : 1400 mm : 1950 mm : 356 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: 3512105465 Operating voltage: 400 V Frequency: 50 Hz Connection: 1.8 kW Saw blade diameter: approx. 250 mm Reference: Zafa - Lot 20 Auction-ID: A7-49882-104

Serial number: 223084 max. sheet width: approx. 1000 mm with mechanical hand lever operation Reference: Walter - Lot 193 Auction-ID: A7-49834-28

Key data: 2000 mm, 8 mm, 6 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centr ...

Set of 25 medium-heavy rack-type metal shelves, ideal for storage in workshops, garages or warehouses. Characteristics per shelf: Capacity: 200 kg per level Height: 2,000 mm Length: 1,200 mm Depth: 600 mm 4 levels per shelf Composition of the lot: 50 blue scales 200 orange smooths 100 metal trays Hardware included Auction-ID: A1-49935-14

Strapping set including an automatic strapping machine, metal reels and a feeder. Auction-ID: A1-49935-40

From 4 to 1 track, equipped with metal detector with ejector \"Mettler Toledo Auction-ID: A1-49547-108

serial number ACB42611-35105 Machine Name: Loma IQ2 METAL DETECTOR Type and Model: Loma IQ2 Year of Manufacture 2024 General Description Parameter Detailed Specification Model Loma IQ2 Series (2nd Generation) Dimensions Aperture 250 mm (Width) x 150 mm (Height) Operating Frequency 128 kHz (Fixed Frequency, optimized for dry products) Sensitivity (Set) Ferrous (Fe): 3.0 mm / Non-Ferrous (NonFe): 3.5 mm Construction Material 304 Stainless Steel (Bead blast finish) Power Supply 110V or 230V, single phase (depending on wiring) Standard Protection Degree IP66 (Water jet wash resistant) Control System 32-bit digital processor for signal processing Visual/audible alarms: Level The audible detection alarm can reach 110–125 dB(A) at 1 meter distance. Throughput speed: It is capable of processing products at belt speeds between 5 m/mi ...

Set of 25 medium-heavy rack-type metal shelves, ideal for storage in workshops, garages or warehouses. Characteristics per shelf: Capacity: 200 kg per level Height: 2,000 mm Length: 1,200 mm Depth: 600 mm 4 levels per shelf Composition of the lot: 50 blue scales 200 orange smooths 100 metal trays Hardware included Auction-ID: A1-49935-16

Set of 25 medium-heavy rack-type metal shelves, ideal for storage in workshops, garages or warehouses. Characteristics per shelf: Capacity: 200 kg per level Height: 2,000 mm Length: 1,200 mm Depth: 600 mm 4 levels per shelf Composition of the lot: 50 blue scales 200 orange smooths 100 metal trays Hardware included Auction-ID: A1-49935-15

including all electrical cabinets for controlling the liftmaster; Auction-ID: A1-49836-16

SPECTROLAB Spark Spectrometer Metal Analyzer     The device is sold as a defective / spare parts dispenser. The source of excitation is defective.   The sale takes place without software/PC Input: 230 VAC / 50 Hz Power: 2500 VA Auction-ID: A7-49816-238

including roller conveyor system Auction-ID: A1-49836-39

material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...

Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,

New Trapezoidal Steel Sheet T-35 – RAL 9006 Trapezoidal steel sheet T-35 for roofing and wall cladding applications, made of coated steel. Specification: Profile: T-35 Length: 6,500 mm Thickness: 0.5 mm Color: RAL 9006 (white aluminium) Coating: protective + anti-condensation (felt) Anti-Condensation Layer: absorbs moisture prevents water dripping reduces corrosion risk protects structure and stored materials Packaging & Delivery: Sheets secured for transport. Auction-ID: A1-49902-53

Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine -Manufacturer: Ferm 7, Metal band saw -Type: BZ-175 -Drive: 0.75 kW -Cutting capacity 90°: Round 180mm, Rectangle 260x180mm -Cutting capacity 45°: Round 115mm, Rectangle 115x180mm -Saw band speed: 70-110, 150-195 m/min -Saw blade: 2360 mm -Transport dimensions: 460/1230/H990 mm -Weight: 140 kg

Equipped with: Ladder, metal stock of approximately 50% stainless steel, 35% Steel, 15% Aluminum see stock list for the exact figures Auction-ID: A1-47360-1

Metal transport crate from military/depot stocks 29.5 x 15.5 x 18.0 cm (LxWxH) - Weight each: 2.30 kg Auction-ID: A1-50015-79

Metal transport crate from military/depot stocks 29.5 x 15.5 x 18.0 cm (LxWxH) - Weight each: 2.30 kg Auction-ID: A1-50015-47

Metal transport crate from military/depot stocks Dimensions: approx. 46.0 × 15.5 × 25.0 cm (L × W × H) Weight each: approx. 6.40 kg Auction-ID: A1-50015-45

Metal transport crate from military/depot stocks Dimensions: approx. 46.0 × 15.5 × 25.0 cm (L × W × H) Weight each: approx. 6.40 kg Auction-ID: A1-50015-56

Lg.Nr. 26301 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° to around 130 mm - Square 120 mm -flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° to around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade - Infinitely adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - hydr. Material vise with hand crank for fine adjustment - Infinitely adjustable clamping pressure - 2 pieces of hydraulic retainers - Micro spray coolant device - Original discharge - roller conveyor with dimension stop 4000 mm - Roller conveyor feeder 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Without worktop! Auction-ID: A1-49875-78

Machine number: 232597 Operating voltage: 400 V Nominal current: 32 A Belt length: 5080 mm Control: SIEMENS SIMATIC HMI Material support height: 1200 mm Roller diameter: 630 mm Projection: 370 mm Maximum cutting height: 320 mm Guide rod (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Sawing parameters - Belt speed: 250 - 2000 m/min incl. roller conveyor width: 350 mm Reference: Heraeus Auction-ID: A7-49882-162

Without worktop! Auction-ID: A1-49875-77

Machine number: 22674 Table dimensions: 780 x 740 mm incl. welding strap and whetstone Reference: Hanon - Lot 14 Auction-ID: A7-49882-271

Operating voltage: 380 V Frequency: 50 Hz Connection: 1.1 kW Speed: 2795 rpm Press force: 6 t incl. small hand press and suitable tool Reference: Lebendigig - Lot 15 Auction-ID: A7-49882-207

ponsdop: diameter 28 x 15 mm / diameter 38 x 11 mm Snijkap: 200 x 20 mm / 300 x 15 mm Hoekafschuifkap: 90° 120 x 120 x 12 mm / 45° 80 x 8 mm Stalen breekijzerkap: diameter 35 / 40 mm Inkepingskap: 100 x 42 x 10 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: 28 x 15 mm Max punching dia: 110 mm Power needed: 4 kW Length: 1510 mm Depth: 590 mm Height: 1570 mm Weight: 1440 kg

6 parts per page = 12 parts 8 metal shelves each = 96 pieces Dimensions: 100 x 60 x 250 cm each Shelf load: 300 kg 2 bollards without content

Machine number 139/6238/11

- Including types C75, U75. - Lengths 400cm and 260cm. - A total of approximately 230 pieces. - Without yokes. Auction-ID: A1-49374-210

Häner Metal Shears HMS18.25 Excavator weight: 18 - 25 t Operating weight: 2,350 kg Dimension A: 2,760 mm Dimension B: 950 mm Dimension C: 520 mm Dimension D: 730 mm Rotation: 360° Front cutting force: 160 t Rear cutting force: 110 t Interchangeable blades: yes Hydraulic Hoses Turn: 1/2 inch Hydraulic hoses open/close: 1 inch Oil flow rate rotation: 30 - 40 l/min Operating pressure on/off: 280 -300 bar Oil flow rate open/close: 180 - 240 l/min Cutting performance: Steel plates: 30 mm U-beam: 300 x 100 x 15 mm H-beam: 300 x 100 x 15 mm T-beam: 320 x 15 mm Angle iron: 200 x 200 x 18 mm Round steel: Ø 70 mm Steel tube: Ø 245 x 10 mm Cycle time: 8 - 12 s Auction-ID: A1-50077-1620

Professionally dismantled and stored - all that remains is to be packed and loaded safely for transport Auction-ID: A1-50085-11

Technical data of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 4 mm. Maximum cutting capacity in stainless steel 2.5 mm. shape of the stamp, Rectangle The HBM E nibbles are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50084-190

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40

Sheet metal bending machine with: – Electrically adjustable rear roller – Digital display for the movement of the rear roller – Hardened rollers – Conical rolling – Swivelling upper roller – Brake motor – Emergency stop – Documentation – Connection voltage 400V Sheet width 1070 mm Sheet thickness 4 mm Stand width 1100 mm Upper roller diameter 110 mm Total power requirement 5.0 KW Machine weight approx. 1.2 t Space requirement approx. 2.0 x 0.9 x 1.1 mm Auction-ID: A7-50084-137

Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-50084-46