134,664 used machines on RESALE, but how to find them? Machine Search
Offer 24186 Technical data: - Manual saw blade feed - Workpiece covering in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds 40 - 80 m/min - Cutting range at 90° around 110 mm - Rectangle 82 x 160 mm - Square 82 x 82 mm - mitred at 45° about 110 mm - Rectangle 80 x 120 mm - Square 82 x 82 mm - Drive 400 V / 1.4 / 1.9 kW - Coolant device - Space requirement approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg
Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x300mm Product dimensions: 600x265 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.2mm; NFE: 1.5mm; SUS: 2.0mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V / 50Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents
Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x400mm Product dimensions: 600x365 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.5mm; NFE: 2.0mm; SUS: 2.5mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50HZ Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents
Technical data Type: Loma IQ3+E Search coil dimension: 650x150mm Product Dimensions: 300x600x115mm (LxWxH) Conveyor belt length: 1,800mm Conveyor belt width: 600mm Conveyor belt height: 850+/-75mm Basic search sensitivity: FE: 1.2mm / NFE: 1.5mm / SUS: 1.8mm Search frequency: Multi-frequency Year of Make: 2017 Special features: on castors Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50Hz Rejection: Retraction Carriage 250mm Operating side: in the conveying direction right Accessories: 1 set of test rods
Technical data Type: Ceia THS/21E Search coil dimension: 400x225mm Product Dimensions: 350x185 (wxh in mm) Conveyor belt length: 1,500mm Conveyor belt width: 350mm Conveyor belt height: 800+/-100mm Basic search sensitivity: FE: 1.0mm; NFE: 1.2mm; SUS: 1.5mm Search frequency: Multi-frequency Year of manufacture: 2018/2025 Special features: 2 identical devices available Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50Hz Excretion: Alarm and Staop Operating side: in the conveying direction Left Accessories: 1 set of test rods
Technical data Type: Pulsotronic M-Pulse2 Search coil dimension: 600x100mm Product dimensions: 560x70 (wxh in mm) Conveyor belt length: 1,600mm Conveyor belt width: 560mm Conveyor belt height: 850+/-50mm Basic search sensitivity: FE: 0.8mm; NFE: 1.0mm; SUS: 1.2mm Search frequency: Medium Year of Make: 2013 Special features: very good condition Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50Hz Excretion: Roller conveyor folding upwards Operating side: in the conveying direction Left Accessories: 1 set of test rods
Technical data Type: Loma IQ2 Search coil dimension: 550x200mm Product dimensions: 500x165 (wxh in mm) Conveyor belt length: 1,500mm Conveyor belt width: 500mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.2mm; NFE: 1.5mm; SUS; 2.0mm Search frequency: 156.8 kHz Year of Make: 2005 Special features: on castors Conveyor belt: link chain Conveying speed: approx. 25m/min Motor: Gear Motor Connection: 400V/50Hz Excretion: Alarm and Stop Operating side: in the conveying direction Left
Technical data Type: SESOTEC GLS Genius+ Search coil dimension: 500x150mm Product Dimensions: 440x115mm (LxH) Conveyor belt length: 1,500mm Conveyor belt width: 440mm Conveyor belt height: 800+/-100mm Basic search sensitivity: FE: 0.8mm / NFE: 1.0mm / SUS: 1.2mm Year of construction: 2024 Special features: new conveyor belt Conveyor belt: Gleiderkette Conveying speed: variable Motor: Gear Motor Connection: 230V / 50 Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: 1 set of test rods
Machine number: 20007 Saw blade diameter: approx. 250 mm Clamping width: 120 mm Auction-ID: A7-49089-267
Machine number: 3356/13 Operating voltage: 400 V Frequency: 50 Hz Rated current: 4 A Saw blade diameter: 300 mm Auction-ID: A7-49089-369
Operating voltage: 230 V Frequency: 50 Hz Speed: 54 rpm Saw blade diameter: 250 mm Auction-ID: A7-49089-479
consisting of 14 pieces Dimensions per box: 1200 x 800 x 500 mm Auction-ID: A7-49089-497
Cidan CNC guillotine shears in top condition (please note, the matching shears are also available) with rotatable upper beam 3m x2.5mm – with CNC control and depth stop, The scissors are in very good technical and optical condition, all bearings are perfect. The machine comes from a small business/first owner and is accordingly well maintained and maintained. Ideal for tinsmiths, roofers, carpenters, metalworkers or workshops looking for a precise and reliable bending machine.
KASTOtec AC 5 for bi-metal or carbide The KASTOtec AC was developed for the optimal use of the tool technologies bi-metal, bi-metal plus, carbide and carbide plus offered on the market. ! Machine is currently being refurbished ! Cutting Area Round (mm): 530 Max workpiece height (mm): 530 Max width workpiece (mm): 630 Max. Rectangular Dimension (mm): 530x630 Max. dimension square (mm): 530x530 Max. material feed length, single stroke (mm): 600 Multiple feed rate (mm): 9999 Shortest Section Length (mm): 6 Shortest off-piece length (mm): 35 Dimensions saw blade (LxHxW mm): 7675x54x1.6 Saw Blade Speed (m/min): 30-300 Motor power (kW): 15 kW Machine dimensions (LxWxH mm): 2,235 mm x 5,335 mm x 2,820 mm Machine weight (kg): 6550 All prices are net plus VAT. VAT We expressly reserve the right to prior sale and errors Brokerage offer for RG-Tools GmbH
material width: 100 mm material thickness: 1 mm cross cut: ? total power requirement: 0,75 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Sheet Cutting Machine Workspace: 100 x 1 Drive: 0,75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 x Ø 32.0 mm capacity 90 degrees: flat: 175 x 75 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 100 x 80 mm capacity 45 degrees: square: 85 x 85 mm turning speeds: 3000 U/min total power requirement: 1.5 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90 - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the s ...
Stroke: 15 mm pressure: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 1650 mm plate thickness: 4 mm straightening roll diameter: 45 mm support rollers: 140 Stk : 17 Stk : Sheet width: 1,650 mm Sheet thickness: 4 mm Leveling roller diameter: 45 mm Number of backup rollers: 140 Number of leveling rollers: 17 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 2000 mm sheet thickness - max.: 10 mm sheet thickness - min.: 3 mm number of straightening: 13 Rollers straightening roll diameter: 145 mm straightening feed: 16 m/min bale length: 2330 mm distance b/n rollers centers: 150 mm diameter of bottom rollers: 290 mm main drive motor: 30 kW weight: 32 t Sheet width: 2,000 mm Max. sheet thickness: 10 mm Min. sheet thickness: 3 mm Number of leveling rollers: 13 Leveling roller diameter: 145 mm Leveling speed: 16 m/min Roller face length: 2,330 mm Center distance between leveling rollers: 150 mm Backup roller diameter: 290 mm Main drive motor: 30 kW Machine weight: 32 t Additional Information Number of backup rollers: 21 / 24 Number of support rows (upper / lower): 3 / 3 Traverse lifting speed: 0.71 mm/s Traverse adjustment range: –18 mm to +42 mm Max. lower traverse tilt: 8 mm The data for this ad was created with ModulMWS - the ...
plate width: 2500 mm sheet thickness - max.: 32 mm sheet thickness - max.: 39 mm sheet thickness - min.: 8 mm bale length: 2700 mm number of straightening: 7 Rollers number driven straightening rollers: 5 Stk straightening roll diameter: 290 mm diameter of input / output straightening rollers: 345 mm number of support rollers: 13 Stk diameter of support rollers: 288 mm stroke of upper beam: 120 mm straightening feed: 16 m/min rated power of main drive: 90 kW : 138 kw weight: 79 t Sheet width: 2,500 mm Max. sheet thickness (St 50): 32 mm Max. sheet thickness (St 34): 39 mm Min. sheet thickness (St 50): 8 mm Roller face length: 2,700 mm Number of leveling rollers: 7 Number of driven leveling rollers: 5 Leveling roller diameter: 290 mm Outlet leveling roller diameter: 345 mm Number of backup rollers: 13 Backup roller diameter: 288 mm Upper beam stroke: 120 mm Leveling speed: 16 m/min Main d ...
x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm Control: Siemens 840 D feeds - fine adjustment: 1-8000 mm/min table-size: 2120 x 500 mm table load capacity: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle turning speed - stepless: 0-15000 U/min spindle motor: 20 kW spindle bearing diameter: 70 mm tool diameter: 63 /126 mm tool magazin:: 40 Stk weight: 12 t total power requirement: 65 kVA weight of the machine ca.: t dimensions of the machine ca.: m X-axis travel: 2,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Control system: Siemens 840 D Feed rate (fine adjustment): 1 – 8,000 mm/min Table size: 2,120 × 500 mm Table load capacity: 2,000 kg Rapid traverse (X-axis): 40 m/min Rapid traverse (Z-axis): 20 m/min Tool holder: HSK-A63 Spindle speed range (infinitely variable): 0 – 15,000 rpm Spindle drive: 20 kW Spindle bearing ...
material width: 250 mm material thickness: 2 mm diameter: 1200 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 10 mm pre-bending: 8 mm upper roll diameter: 270 mm lower roll diameter: 250 mm side roll diameter: 210 mm total power requirement: 11 kW weight of the machine ca.: 7750 kg Overall size: 5600x1450x1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1250 mm plate thickness: 15 mm number of rolls: 21 Stück roll diameter: 80 mm band speed: 12 m/min straightening cross-section: 5700 mm² Control: total power requirement: 60 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 40 mm pre-bending: 30 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 22 kW machine weight ab.: 17200 kg Overall size: 5060 x 2200 x 2180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 160 mm lower roll diameter: 140 mm side roll diameter: 120 mm total power requirement: 2,2 kW Overall size: 4140x1040x1140 mm weight of the machine ca.: 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4100 mm plate thickness: 35 mm pre-bending: 28 mm upper roll diameter: 540 mm lower roll diameter: 541 mm side roll diameter: 440 mm total power requirement: 37 kW weight of the machine ca.: 48.100 kg Machine dimensions approx.: 7670x3000x2930 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 16 mm pre-bending: 13 mm upper roll diameter: 330 mm lower roll diameter: 300 mm side roll diameter: 240 mm Control: total power requirement: 11 kW Overall size: 5600x1650x1900 mm weight of the machine ca.: 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 210 mm lower roll diameter: 190 mm side roll diameter: 170 mm total power requirement: 7,5 kW Overall size: 5200x1400x1300 mm machine weight ab.: 5.400 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 8 mm pre-bending: 6 mm upper roll diameter: 190 mm lower roll diameter: 170 mm side roll diameter: 150 mm total power requirement: 3 kW weight of the machine ca.: 3.450 kg Machine dimensions approx.: 4040x1380x1255 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 25 mm pre-bending: 20 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 18,5 kW weight of the machine ca.: 17.100 kg Machine dimensions approx.: 5800x2100x2000 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
sheet width: 1050 mm plate thickness: 1,8 mm pre-bending: 1,5 upper roll diameter: 70 mm min. dia.: 105 mm total power requirement: 1,1 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1700x700x1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1550 mm : 2,0 mm : 1,5 mm roll diameter: oben 90 mm : 560 kg : 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...
diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...
diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit ...
material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-61
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-161
and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-261
Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
Machine number: 4818 Operating voltage: 400 V Frequency: 50 Hz Rated current: 1.5 A Grinding wheel diameter: approx. 250 mm Auction-ID: A7-49089-377
This 6-axis DÖRRIES SCHARMANN Heavycut 1.2 TDV4 was manufactured in 1989. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 2,500 mm with a maximum table load capacity of 25,000 kg. If you are looking to get high-quality boring capabilities, consider the DÖRRIES SCHARMANN Heavycut 1.2 TDV4 boring machine we have for sale. Contact us for further details.
x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain iTNC 530 spindle speed:: 6000 1/min. spindle taper: CAT-50 ISO spindle drive: (S1) 10 kW table surface area: 1300 x 600 mm table load: 1200 kg feed speeds: 1-10000 mm/min rapid travel x/y/z: 20/20/15 m/min distance table - lower edge spindle: 125-725 mm total power requirement: 25 kVA weight of the machine ca.: 7,5 t dimensions of machine: 3600 x 2300 x 3000 mm Equipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h ...
Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...
work piece width: max 145 x 150 mm band speed: 1.0 - 8.0 m/min workpiece height: max. 100 mm total power requirement: ca. 5.5 kW weight of the machine ca.: 900 kg. dimensions of the machine ca.: 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDG ...
maximum number of results exceeded
please refine your search
250 € 
