128,836 used machines on RESALE, but how to find them? Machine Search
Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm
Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg
Metal band saw blade, band saw blade -unused -Number: 7x sheets available -Price: per piece -Toothing: 6/8 -Dimensions: 4570 x 41 x 1.7 mm
Metal band saw blade, band saw blade, metal saw band -Metal saw band: 34 x 2 mm, unused -Length: 3800 mm -Weight: 1.2 kg
metal band saw blade, band saw blade, metal saw band -Manufacturer: Eyltool, metal band saw M42 unused -Type: M42 2060x20x0.9 ZpZ 8/12 -Number: 10x metal saw band available -Price per piece -Transport dimension: Ø 230 / 40 mm -Weight: 0.3kg/pcs
VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg
sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, bi-metal saw band M42 unused -Type: Biflex Kobali M42 3660 x 25 x 1.5 mm -Quantity: 5x sheets available -Price per piece -Transport dimensions: Ø 410 / 50 mm -Weight: 0.7kg/piece
Metal band saw blade, band saw blade, metal saw band -Metal band saw blade: saw band unused -Type: 4125 x 26 x 1.5mm -Quantity: 3x sheets available -Price per piece -Transport dimensions: Ø 450 / 40 mm -Weight: 0.8 kg/piece
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete -Transport dimensions: 800/700/H30 mm -Weight: 8.2 kg
Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Bayerwald, metal band saw M42 unused -Type: M42 2480x27x0.9 8/12 -Quantity: 1x metal saw band available -Transport dimensions: Ø 280 / 55 mm -Weight: 0.5 kg/piece
We offer you here a used box shelf for sale. The shelf is ideal for lighter boxes, but cardboard boxes can also be easily picked up. The box shelf can be individually adjusted to your own needs. Both the angle of inclination of the roll strips and the distance between planes can be quickly and easily adjusted with an Allen. The levels are provided with guide rails on both sides and a stop on one side, so that the boxes/cardboard boxes are secured against accidental falling. Technical data and further information: Manufacturer: Beewatec Designation: Cardboardrack 1 lanes 19032-01 Year of construction: approx. 2015 Notes: As can be seen in the pictures, the shelf is delivered in a pre-assembled state. Included in delivery are: 01x Box shelf, used Total length: approx. 2,500 mm Total depth: approx. 610 mm Total height: approx. 1,915 mm Internal depth: approx. ...
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Holex, Bi-metal saw band unused -Type: 173605 5/8 -Length: 2710 mm -Number: 7 sheets available -Price: per piece -Transport dimensions: Ø 300 x 40 mm -Weight: 0.5 kg/piece
KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls
CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...
CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg
material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz
Sheet metal stack pallet, sheet metal traverse, sheet metal stack shelf -Load capacity: 10 tons -for crane/forklift operation -Dimensions: 3000/1800/H420 mm -Quantity: 3 available Price: per piece -Weight per piece: 300 kg
sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.
350 x 200mm aperture. 300m conveyor width. 1.8m long. Push reject system. Right to left production. Full supermarket spec. 880 Line height with adjustable feet.
550 x 160mm aperture. 400mm conveyor width. 3250mm machine length. 900mm line height with adjustable feet. New belt fitted on the machine. Right to left production. Full supermarket spec.
450 x 160mm aperture. 300mm conveyor width. 1800mm machine length. 870mm line height. Left to right production.
350 x 115mm aperture. 300mm conveyor width. 1.3m machine length. Air reject system. 1.3m machine length. Adjustable line height with wheels.
370 x 160mm. 310mm width conveyor. 760mm line height with adjustable legs. 1200mm long. Left to right production. Ferrous in foil.
350x100mm aperture. 280mm conveyor width. 900mm line height, adjustable legs. Left to right production. Air or push reject system. 2300mm total machine length.
370 x 100mm aperture. 300mm conveyor width. Right to left production. Reject system. M&S Spec. 2100mm long 840mm line height with adjustable feet.
300x160mm aperture. 250mm conveyor width. Left to right production. Supermarket spec. 900mm line height with adjustable feet. 2600mm machine length. Full electrical rebuild completed.
350 x 130mm aperture. 870mm line height. 1600mm machine length. Supermarket spec. New belt and reject system. Left to right production.
Usable aperture – 355mm x 160mm. Conveyor width – 300mm. 1.5m long. 90cm high. Left to right production.
Usable aperture size 360mm (wide) x 110mm (high). 300mm wide conveyor belt. Full length 2,500mm. Line height 900mm. Stop on detection. Left to right production direction.
Usable aperture size 350mm (wide) x 135mm (high) 230mm wide conveyor belt Full length 2500mm Line height 850mm Auto push reject on both machines. Left to right production direction
350 X 110mm usable aperture. 260mm conveyor width. 920mm line height. Twin head metal detector with reject. M&S Spec. Right to left production line.
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 4500 kg -Weight: 31 kg
Usable aperture size 550mm (wide) x 200mm (high) 450mm wide conveyor belt Full length 2000mm Line height 860mm Right to left production direction
450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece
maximum number of results exceeded
please refine your search
