metal cutting used for sale

Pneumatic diaphragm pump with pressure multiplier. New equipment

A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180 x 100 mm saw blade turning speeds: 3000 U/min total power requirement: 2,2 kW weight of the machine ca.: 0,51 t dimensions: 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU026E105 MakeEvans Universal Ltd. Leeds No.2042 Year of construction1999 Mounted on framecheck Specified Features - Drying oven Drying oven:Zinc crucible furnace: (1x) Number of compartments:1 Internal diameter425mm Internal height450mm, Inlet dia. 300mm Gas heating, Burner make Riello, type 40 GS 5 (120 KW) General LocationBarneveld With switchgear(as is) Floorspace4,2x2,1 M Total height2,3 M Weight2300 KGConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicEvans Lee ...

Key data: 100 mm, 600 , 1200

Used shelf Frame 600 x 1980 mm, (130 pcs) Shelves 600 x 1200 mm, (550 pcs )

Key data: 100 mm, 400 , 1500

Used shelf Frame 400 x 3400 mm, (90 pcs) Shelves 400 x 1500 mm, (500 pcs)

Key data: 100 mm, 800 , 1200

Used shelf Frame 800 x 3400 mm, (35 pcs) Shelf 800 x 1200 mm , (190 pcs)

General SKUR1406 LocationBarneveld CEcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface8 m2 Specified Features - Nutsche filter Capacity17035 ltr With jacket(85 ltr), (66 ltr) Max. temperature-30/200 degr. C Without drivecheck MaterialStainless steel 1.4435 (316L) With jacketcheck General MakeSolme, Societa Lavorazione Metalli (It) Mach.No.9384 Year of construction2015 Floorspace4,0x4,0 M Weight8400 KgOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesNutsche filtersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceuticalAPIMinerals & inorganicSolme, Societa Lavorazione MetalliIn ...

Equipment: Insulation, Overpressure,Manufacturer: METALINOX,Condition: used,Volume: 7,500,Max. overpressure: 5.0,Design: upright,Standing form: feet height adjustable,Number of feet: 4,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 1,900,Diameter outside: 2,034,Cylindrical height: 2,000,Total height: 4,400,Wall thickness floors: 5,Wall thickness cylinder: 5,Year of construction: 2005,Technical documents: Drawing, CE marking and Declaration of Conformity,Manhole / Dome: in the topsoil,Type plate: Yes,Equipment: Spray head, crane eyelets,Outlet: DN80 DIN

Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible.

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley filled Contents and equipment see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but ...

Description 9214 - Likwifier jacketed with steam and holding tank Manufactured by WATSON METAL MASTERS INC (USA) Year 2012 A Likwifier is a type of mixer specifically designed to dissolve solids or semi-solids into a liquid, often used in the food industry for tasks like dissolving gums, emulsifiers, and other ingredients in ice cream mixes, sauces, and other food products

sheet width: 2050 mm plate thickness: 3.0 mm distance between columns: 2100 mm back stop - adjustable: 550 mm no. of strokes: 35 Hub/min cutting angle: 2°12 table width: 400 mm table height: 850 mm Control: konv. total power requirement: 3.0 kW weight of the machine ca.: 1280 kg dimensions of the machine ca.: 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge Continuously adjustable range Adjustment from the back via handwheel Includes mm scale Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade) T ...

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 36 m/min total power requirement: 4 kW weight of the machine ca.: 82 kg dimensions of the machine ca.: 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tilta ...

tube diameter: 42.0 x 3.0 STAHL mm tube diameter: 30.0 x 2.0 EDELST mm bending angle max.: 180 ° bending radius max.: 100 mm bending speed: 2.0 U/min. Control: NC voltage: 400 V total power requirement: 0.55 kW weight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 355 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 125 x 125 mm capacity 90 degrees: flat: 170 x 110 mm turning speeds: 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees: - 45 / + 0 total power requirement: 3.5 kW weight of the machine ca.: 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts ...

sheet width: 2500 mm plate thickness: 0.8 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

METALLKRAFT MSBM 1520/35 PRO ist eine motorische Schwenkbiegemaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbreite 1520 mm; Biegeleistung: Stahl 4 mm, VA 3 mm, Aluminium 4 mm; Durchlass 200 mm. Antriebe Ober/Unter 1 kW je; Gesamt 4 kW; Gewicht ~2700 kg; Maße L2345×B1100×H1560 mm. Erzielt enge Toleranzen; Einsatz: Automotive, Maschinenbau, Luftfahrt, Medizintechnik, Uhren. Technische Daten ohne Gewähr

CROWN CARNAUD METALBOX S4B-2M VACUUM JAR SEALING MACHINE Manufacturer: CROWN Closures Europe Brand: CARNAUD METALBOX Model: S4B-2M Serial no.: 5375 Year: 2000 CROWN CARNAUD METALBOX model S4B-2M vacuum jar sealer. Designed to apply metal lids of various types and diameters to glass jars, bottles and similar containers. Max. output: 800 containers/minute (depending on lid size) Power supply: 220/380 V 3PH; 50 Hz Steam: 150 kg/h at 6 bar Compressed air: 5 – 6 bar Operation temperature: 0 – 50 °C Sealing machine dimensions: 420 x 120 x 200 cm (LxWxH) Sealing machine weight: 1,900 kg Includes a TECNOCAP model EM lid feeder and an electric panel. Lid feeder dimensions: 110 x 125 x 330 cm (LxWxH) Electric panel dimensions: 40 x 80 x 190 cm (LxWxH) Sold as is.

Guillotine shear LOTZE type HSS 20 / 7Cutting length 2050 mmCutting thickness 7 mmwith single back gauge; used

Guillotine Shears, Metal Shears DIGEP Type OL 3Workshop Overhauled Guillotine ShearFabr. No. 1312 Year of construction 1977Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mmCutting thickness at 450 N/mm² 3 mmSingle back gauge 500 mmStand projection 200 mmCutting angle 2 stroke rate at full cutting length max. 50 strokes/min. Working height 860 mmMotor power 2.2 kWNew connection 380 Volt, 50 Hz- LED cutting area-Lighting- Simple backgauge with manual adjustment- Mechanical

Robust industrial metal cabinet, ideal for storing tools, parts or equipment in workshops or industrial environments. Thanks to its solid construction and adjustable internal rails, this cabinet makes it easy to adapt the interior design as needed (shelves, bins, vertical storage). Its compact yet robust size makes it a versatile solution for efficiently organizing a workspace. Ideal for: Mechanical workshops Industrial maintenance Tooling Storage Production Corporate Logistics Sustainable solution to optimize organization and storage in the workshop. Auction-ID: A1-48554-50

Unused stainless steel filter housing with certificate and drawings THREE-SIXTEEN-L Housing, Part No. ALTD11GNW15ABH4, Lot M241217E01, year 2011, ATEX II 2 GD Auction-ID: A7-49816-170

Unused stainless steel filter housing with certificate and drawings THREE-SIXTEEN-L Housing, Part No. ALTD11GNW15ABH4, Lot M246774E01, year 2011, ATEX II 2 GD Auction-ID: A7-49816-171

Tape measure assist 3 meters Tape measure - Metal case (12x) Auction-ID: A1-40897-225

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Inv. Num. : 7381 Type:- Producer: Jorns Generated: Parameters: Maximum sheet thickness when cutting: 3 mm Maximum sheet metal plate width: 1250 mm Max. the weight of the scroll: 6000 kg

Qty. 1 Second-hand slitting line for stainless steel – in storage Mfc.: SACMA Overhauled by CAMU Built: 1992 Dismantled: 2024 Coil weight: max. 27,000 kg at uncoiler, 10,000 kg at recoiler Coil internal diameter: 500 mm Speed: max. 140 m/min Double mandrel with centering side 2 cutting heads / shears with 180 mm diameter shafts New sheet metal tensioner Complete set of blades for stainless steel Ribbon turner on rail complete with scale Scrap baler

Deep Drilling Machine brand Buck Year of construction 2000

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

GROZ shearing machine: maximum shearing size around 13 mm, lever length 1150 mm, weight 25 kg Auction-ID: A1-48552-175

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

35 cm x 20 cm

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price â?¬13.00 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Max Saegeblattdurchmesser, 315 mms of drilling 32 mms sheet speeds 53-105 revos quick instep vice 180 mms of opening engine power 2.2 kW role edition coolant equipment +-45 ° tiltable weight 220 kg special price: net 1584,-? . options: underframe net 197,-? circular-saw blade

Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available

Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m