129,254 used machines on RESALE, but how to find them? Machine Search
A complete double agitator system 2 x 3000l made of high-quality V2A including propeller agitators made of V2A, continuously variable speed-controlled. Inspection by appointment possible.
Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg
Offer 23380 Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds in gear stages 95 - 2000 rpm - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height adjustable 340 x 320 mm - Table can be tilted left + right -Max. Distance table – drilling spindle 500 mm - Max distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm -Lighting - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg
Specifications: - Max. working width 2520 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment can be preselected - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg
Glotter Metal Temperature control unit with chocolate pump and vibrator - Chocolate pump GM 950 - for pouring, filling or coating -Stainless steel - Vibrator EM 3045 - Tabletop appliance with drainer tray - With manual regulator - Temperature control unit with water bath heating - 20 to 50°C adjustable - Container with 15 liters - Ready to plug in Connection 220V, 1500 Watt Used machine cleaned More chocolate machines in stock!
Safeline Metal detector checkweigher Stainless, overall belt dimensions 1600mm x 330mm, aperture 450mm L x 225mm W, AIC checkweigher 250g -3500Kgs, mobile, 1Ph
Manufacturer: COMUNA-Metall Year of Manufacture: 2008 Gas type: Category 12HL Connection pressure: 20-50 mbar Nominal power range: 150/195 kW Voltage: 230/400V, 3-phase, 50Hz Fuse: NH 00, 100A Permissible operating pressure: 6 bar Thermal power: 100 kW Electrical power: 50 kW Protection class: IP 54 Permissible operating temperature: 90/70°C Find more here - / Contact us at -
Mettler Toledo Garvens XE 3 CC belt checkweigher with Safeline metal detector in good condition. - max. 100 weighings/min - Weighing range max. 750g - temperature limit 0°C/+40°C - 230V/50Hz - Conveyor belt width 19 cm - Last Service and calibration: 2023
Separator - S+S Metal Separator Protector 40 (2 pcs.) Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Description Electric charge Working hours: 6.300
sheet width: 1020 mm plate thickness: 2,5 mm bending angle max.: 135 ° stroke of upper beam: 25 mm weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description Vertical Coating Machine nr.2 semicontinuos vertical doors with easy acces system nr.1 Jonic AC MF plasma system for cleaning, etching and sub-level preparation nr.2 Thermic evaporation deposit system nr.1 Thermic evaporation generator nr.1 Rotative vacuum pump nr.1 ROOTS vacuum pump nr.2 High-Vaccum diffusion pump Valve Pack Digital Instruments for Vaccum and High-Vacuum Electrical control panel CVMP™ PRO equipment (Constant Vacuum_Multisteps Process) Automatic working cycle Control panel for industrial automation for PVD MK 48" nr. 2 Set of internal holders
Key data: 1250 mm
Exhibition machine (unused) Working width 1,250mm Bending capacity steel : 1.25 (400N/mm2) Bending angle max. 135 degrees
METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...
A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible.
thread dia.: M6 - M36 mm turning speeds: 156 U/min radius: 1200 mm angle adjustable from - to: 0 - 90 Grad weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. ...
plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 560 x 220 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working height from to: 600 - 1150 mm : 1200 kg weight: 495 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Very few working hours: approx. 200 h Technical and visual condition: very good+ Pictures attached Price: 16.000 EUR net ExW Heavy welded steel construction Horizontal and vertical work possibility All three rollers driven by hydraulic motor and planetary gear Hardened rolls Hydraulic delivery via two lower rollers Lateral mechanical straightening rollers, infinitely adjustable Separate control panel with foot control and 2 digital displays Bending performances profile type optional Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 Bending performances profile type standard Square material dimensions [1] 45 mm Square material min. bending Ø [1] 500 mm Square material dimensions [2] 15 mm Square material min. bending Ø [2] 380 mm Flat material l ...
saw blade diameter: 355 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 125 x 125 mm capacity 90 degrees: flat: 170 x 110 mm turning speeds: 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees: - 45 / + 0 total power requirement: 3.5 kW weight of the machine ca.: 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts ...
A tray sealer MetalTech is available. Materials: plastic trays/aluminium trays, max. tray dimensions X/Y: 325mm/265mm. An on-site inspection is possible.
Technical data of the pallet rack crossbar: Shelving System: Metal Sistem Type: Unipal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Band Saw Machine Metallkraft BMBS 300x 320 CNC BJ 2022
Manufacturer: COMUNA-Metall Model: 2726-02 Type of Machine : CHP Plant Nominal Heat Load: 156 kW Thermal Output: 92 kW Electrical Output: 50 kW Operating Voltage: 230/400 V, 3-phase, 50 Hz Fuse Rating: NH00, 100A Connection Pressure: 20–80 mbar Max Operating Pressure: 6 bar Operating Temperature: 100/70 °C Protection Class: IP54 Certification: DIN DVGW Find more here - / Contact us at -
width of the strips: 75 mm band length: 2000 mm band speed: 36 m/min total power requirement: 4 kW weight of the machine ca.: 82 kg dimensions of the machine ca.: 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tilta ...
tube diameter: 42.0 x 3.0 STAHL mm tube diameter: 30.0 x 2.0 EDELST mm bending angle max.: 180 ° bending radius max.: 100 mm bending speed: 2.0 U/min. Control: NC voltage: 400 V total power requirement: 0.55 kW weight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An automatic meat tenderizer roller tenderizer Metalquimia is available. Design: needle-/roller, theoretical throughput capacity: approx. 8500kg/h, machine dimensions X/Y/Z: approx. 2000mm/1300mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible.
This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information.
This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine.
Mesutronic Metal detector with sorter, type: FC 01 BA 3.1.1, serial number: 1013 FC, year of manufacture: 2013, 230 V, 50 Hz, plastic belt, belt width: 80 mm, pass-through: 130 mm x 205 mm, overall dimensions: 2050 mm x 990 mm x 1500 mm., Safeline Metal detector with exchanger, passage: 200 mm x 350 mm, plastic belt, belt width: 120 mm, overall dimensions: 1600 mm x 900 mm x 1650 mm., Metal detector by Thermo Electron Corporation, Serial number: 06132547, plastic band, band width: 260 mm, passage: 300 mm x 100 mm, overall dimensions: 1200 mm x 900 mm x 1500 mm., Metal detector of the Thermo Electron Corporation , Model: SPECGKDSP3NAS, Serial number: 6277, Year of construction: 2005, plastic band, band width: 250 mm, passage: 300 mm x 100 mm, overall dimensions: 1400 mm x 1100 mm x 1500 mm., Goring Kerr Limited mobile pipeline metal detector, Type: D.S.P2, Serial number: 57423, Year of ma ...
This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine.
General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...
This METAL TECHNIKA OWD-1600 was manufactured in 2018. It features a GOT3000 Mitsubishi controller and excels in full optimization of 30 dimensions across two quality grades. It supports various cutting programs and can handle input material widths from 12 to 250 mm and heights up to 120 mm. Central oil lubrication ensures smooth operation. Consider the opportunity to buy this METAL TECHNIKA OWD-1600 Optimizing Cross-Cut Saw. Contact us for more information about this machine.
This Metallkraft HTBS PRO 3113 was manufactured in 2022. Its a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine.
sheet width: 2050 mm plate thickness: 3.0 mm distance between columns: 2100 mm back stop - adjustable: 550 mm no. of strokes: 35 Hub/min cutting angle: 2°12 table width: 400 mm table height: 850 mm Control: konv. total power requirement: 3.0 kW weight of the machine ca.: 1280 kg dimensions of the machine ca.: 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge stepless adjustment range adjustment from behind - by handwheel including mm scale max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control) The data for this ad was created with ModulMWS - the software ...
filling amount: 250 l basket dimensions: 550 x 270 x 75 mm dimensions of the machine ca.: 1,25 x 0,85 x 1,24 m BALTIC METALL - 6957 Dive Wash Unit - Immersion Tank Dimensions: 595 x 395 x 500 mm - Draining Area Dimensions: 470 x 350 mm - 2x Storage Rack Dimensions: 480 x 360 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.
Brush sander WOODLAND MACHINERY with metal brush (new) Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11.57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)
Holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, holder -Manufacturer: PGH Metall, holder type 50 60 19 with reamer -Hole: Ø 20 mm -Reamer: Ø 35 mm -Dimensions: Ø 50 x 390 mm -Weight: 1.1 kg
Pneumatic diaphragm pump with pressure multiplier. New equipment
General SKUR1406 LocationBarneveld CEcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface8 m2 Specified Features - Nutsche filter Capacity17035 ltr With jacket(85 ltr), (66 ltr) Max. temperature-30/200 degr. C Without drivecheck MaterialStainless steel 1.4435 (316L) Information MakeSolme, Societa Lavorazione Metalli (It) Mach.No.9384 Year of construction2015 Floorspace4,0x4,0 M Weight8400 KgNutsche filtersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceuticalAPIMinerals & inorganicAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered foodsOils & fatSolme, Societa Lavorazione MetalliFilters > Nutsch ...
General SKU026E105 MakeEvans Universal Ltd. Leeds No.2042 Year of construction1999 Mounted on framecheck Specified Features - Drying oven Drying ovenZinc crucible furnace (1x) Number of compartments:1 Internal diameter425mm Internal height450mm, Inlet dia. 300mm Gas heatingBurner make Riello, type 40 GS 5 (120 KW) Information LocationBarneveld With switchgearcheck Floorspace4,2x2,1 M Total height2,3 M Weight2300 KGDrying ovensDiscountEvans LeedsDryers > Drying ovensDiscountBrand > Evans Leeds What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but ...
Guillotine shear LOTZE type HSS 20 / 7Cutting length 2050 mmCutting thickness 7 mmwith single back gauge; used
Guillotine Shears, Metal Shears DIGEP Type OL 3Workshop Overhauled Guillotine ShearFabr. No. 1312 Year of construction 1977Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mmCutting thickness at 450 N/mm² 3 mmSingle back gauge 500 mmStand projection 200 mmCutting angle 2 stroke rate at full cutting length max. 50 strokes/min. Working height 860 mmMotor power 2.2 kWNew connection 380 Volt, 50 Hz- LED cutting area-Lighting- Simple backgauge with manual adjustment- Mechanical
maximum number of results exceeded
please refine your search
