metal cutting used for sale

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm -Load capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPUZ with swiveling support ring -Clamping range: 0 - 25 mm -Load capacity: 3 t -Number: 1x terminals available -Price per piece -Dimensions: 230/90/H380 mm -Weight: 16 kg/pc.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPSUNZ 6t with swiveling support ring -Clamp range: 32-64 mm -Load capacity: 6 t -Number: 4x clamps available -Price per piece -Dimensions: 310/100/H420 mm -Weight: 24 kg/pc.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm -Weight: 35 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IP 10 with swiveling support ring -Clamping range: 0 - 50 mm -Load capacity: 6 t -Number: 8 terminals available -Price: per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUNZ with swiveling support ring -Clamping range: 0-32 mm -Load capacity: 6 t -Number: 23 terminals available -Price: per piece -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUN with swiveling support ring -Clamping range: 0-40 mm -Load capacity: 9 t -Number: 7 terminals available -Price: per piece -Dimensions: 300/110/H470 mm -Weight: 28 kg/pc.

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, Vertical band saw USF-5R -Drive: 3 kW -without brakes, removed -Cutting width: max. 500 mm -Cutting height: max. 400 mm -Saw blade: Length 3850 to 4050 mm -Saw blade speed: stepless -Work table: swiveling -Accessories: including additional band saw blades (see photos) -Dimensions: 1300/910/H2140 mm -Weight: 625 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IP N with swiveling support ring -Clamp range: 0-40 mm -Load capacity: 6 t -Number: 6x clamps available -Price per piece -Dimensions: 280/100/H460 mm -Weight: 26 kg/pc.

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, vertical band saw type USF 10R -Drive: 2.2 kW -Cutting width: max. 1020 mm -Cutting height: max. 275 mm -Saw band: length 4700 to 4800 mm -Saw band speed: continuously adjustable from 12-2000 rpm in 4 gear levels -Work table: pivoting 45°/15° -Dimensions: 2160/1000/H2000 mm -Weight: 1250 kg

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 20-40 mm -Load capacity: 12 t -Quantity: 2x clamps available -Dimensions: 330/90/H365 mm -Weight: 48 kg/pc.

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available -Dimensions: 275/80/H300 mm -Weight: 30 kg

Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm -Quantity: 2x box available -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm -Weight: 8.2 kg/piece

beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SGK -Grip width: 1-75 mm -Load capacity: 2500 kg -Dimensions: 300/150/H390 mm -Weight: 17 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/400 with saw band welding device -Cutting width: max. 390 mm -Cutting height: max.215 mm -Engine power: 1.1 KW -Saw band: length 2780 to 2980 mm -Saw blade speed: adjustable -Work table: swiveling -Band saw welding machine: Ideal BSO -Dimensions: 1050/630/H1670 mm -Weight: 414 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal clamp: Safety lifting clamp with swiveling support ring -Type: 3TSEVLA x 06T 1 28A -Clamping range: 0-35 mm -Load capacity: 3 t -Dimensions: 200/80/H320 mm -Weight: 7.6 kg

-Metal Detector -Manufacturer: S+S Separation and Sorting Technology GmbH - Type: Ecoline 750/300/100 -Mains voltage: 230 / 115 VAC - Frequency: 50/60 Hz

Type: Pallet racking system Brand: Metal-sistem Configuration: 5 uprights × 40 cross beams Cross beam length: 2700 mm Upright height: 5500 mm Upright width: 1100 mm Number of cross beams: 40 Number of uprights: 5 Condition: Dismantled, may show minor damage Auction-ID: A7-45255-6

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 € : 428.16 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZUCHETTI – Production Line for Metal Pipes General data: Manufacturer: Zuchetti Machine type: Pipe production line Year of manufacture: 2006 Weight: approx. 80000 kg Dimensions (L x W x H): approx. 150000 x 12000 x 2500 mm Condition: Partially overhauled Line components: Double uncoiler for continuous feeding of metal strips Welding junction station for seam joining Horizontal sheet uncoiler for optimized production flow 9 profiling stages for pipe forming High-frequency welding system for durable weld seams Turk heads for final processing Automatic packaging station Electrical panels for control and safety Available roller sets: Square pipes: 10x10 mm; 15x15 mm; 20x20 mm; 25x25 mm; 30x30 mm; 35x35 mm; 40x40 mm; 50x50 mm; 70x70 mm Round pipes: 20 mm; 21.3 mm; 21.8 mm; 25 mm; 25.4 mm; 26.9 mm; 28 mm; 30 mm; 31 mm; 32 mm; 33.7 mm; 35 mm; 36.8 mm; 38 mm; 38.4 m ...

Manufacturer: Bizerba Type: VARIC SA 400/500/300 Nominal Voltage: 230/115 VAC Nominal Current: 0.7/1.4 A Frequency: 50/60 Hz Certification: CE Find more here - / Contact us at -

EINSTELUNG TAS 42 A – Sheet Engraving Machine General data: Manufacturer: Einstelung Model: TAS 42 A Machine type: Sheet engraving machine Power supply: 380 V / 50 Hz Maximum speed: 1000 rpm Weight: approx. 700 kg Dimensions (L x W x H): approx. 1200 x 700 x 2400 mm Description: Industrial engraving machine designed for marking and engraving sheet materials. The machine operates at speeds up to 1000 rpm and is suitable for precision engraving applications in industrial environments. Auction-ID: A7-45351-37

Sheet metal plastering machine Jeros 5015/828 for 2-edge trays Stainless steel version with lubrication Connection 400V, 16A-CEE plug Used machine

AMADA Aries 222 – CNC Punching Machine General data: Manufacturer: AMADA Model: Aries 222 Machine type: Punching and perforating machine for sheet metal Weight: approx. 2000 kg Dimensions (L x W x H): approx. 3000 x 1500 x 2000 mm Technical details: Pressing force: 20 tons Maximum sheet size (without repositioning): not specified Control system: CNC Amadan 03P Turret configuration: typically equipped with a 10-station tool turret for fast tool changes Description: CNC punching machine AMADA Aries 222 designed for processing and perforating sheet metal. The machine is equipped with a turret system allowing quick tool changes and efficient production, making it suitable for industrial sheet metal fabrication. Auction-ID: A7-45351-6

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 € : 630.3 € : 2530 mm : 6 mm : 6 mm : 4 mm : 190 mm : 5.5 kW : 4250 mm : 1200 mm : 1150 mm : 3750 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7100 € : 137.03 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2400 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 2900 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ 1.000,00 USD / KG

Sales table SAMSUNG Galaxy metal grey approx. 150x100x220cm (WxDxH), stand with advertising and backlight, substructure sales area, article surveillance system for 6 devices, incl. 8x mobile phone dummies, 2 watch dummies

Packing table metal wood white worktop grey approx. 180x60x85/150cm (WxDxH), paper roll holder, 3 drops for waste separation system

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

TRUMPF LiftMaster – TruLaser 3030/3530/5030 Max load: 900 kg Sheet metal format: 2000×1000 to 3000×1500 mm Max thickness: 25 mm (20 mm with rake) Vertical stroke: 1180 mm Transfer height: 840 mm Accuracy: 20 mm / 3000 mm Weight approx.: 3700 kg Compressed air: 7–14 bar · 13.5 Nm³/h Engines: 3.0 kW + 0.37 kW + 0.75 kW Suction force: 1230 N Trolley: 3000 kg · H stack 200 mm Auction-ID: A1-44765-1203

KASTO PKS 140 — Datasheet Feature Value Blade diameter Ø425 mm (HSS) Cut (round) Ø10–140 mm Cut (square) 10×10 →125×125 mm Cutting (flat B×H) 140×125 mm Max Depth (HSS) ~300 mm Feed rate 16–600 mm/min (programmable) Inlet speed 5000 mm/min Blade motor HSS 10.0 kW / HM 29.0 kW HSS cutting speed 6–70 m/min · HM 80–150 m/min Max. tightening Princ. 2200 daN · Advance 1400 daN Hydraulics 3 kW Cooling pump. 25 l/min · 0.1 kW Bearing height 950 mm Precision power supply ±0.05 mm/300 mm Conveyor length: 5400 mm. Safety light bar included. Auction-ID: A1-44765-1238

Cutting capacity: 340 mm (round) / 340 x 340 mm (square) Power: 8 kW Power supply: 400 V / 50 Hz Hydraulic clamping Integrated coolant system Chip conveyor present Auction-ID: A1-44765-205

• 200 L main tank with armature agitator • Stainless steel design • Heated double jacket • Additional auxiliary tanks • Pump and piping system • Stainless steel control cabinet • Hopper with double jacket • Food/chocolate application • Used, functional • Built entirely on frames • Special plant for chocolate processing • Complete system incl. pumps and control system • Immediately available Note for non-EU buyers: Buyers outside the European Union are responsible for all costs of customs clearance as well as applicable import duties, taxes and fees. Auction-ID: 04C-RCW-2

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 € : 1328.67 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 € : 530.98 € : 3030 mm : 4 mm : 4 mm : 2 mm : 180 mm : 4 kW : 4600 mm : 1120 mm : 1020 mm : 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 35400 € : 676.14 € : 3030 mm : 6 mm : 6 mm : 4 mm : 220 mm : 5.5 kW : 4750 mm : 1200 mm : 1150 mm : 4920 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear  ...

Brochure stand acrylic-metal, approx. 30x40x160cm (WxDxH)

Bundle consists of 5 pallets with various industrial components, The parts are made of stainless steel and hot-dip galvanized steel Auction-ID: A1-45495-388

Consisting of about 32 pallet positions, including pallets and lattice boxes (5 pieces). Auction-ID: A1-45495-236

Mixed lot consists of 5 pallets with various industrial components, stainless steel and hot-dip galvanized Auction-ID: A1-45495-387

Thermo electra Type 2xPT100-3L , Art no. P155555552001 , Prodwk 45-2004 Auction-ID: A7-45483-78