128,877 used machines on RESALE, but how to find them? Machine Search
NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg
Remmert LaserFLEX | Fully automatic loading and unloading –used-: Price from location: 145.000.-€ (net) plus dismantling etc.! Manufacturer: Remmert Type: LaserFlex Year of construction: approx. 2020 Format 3015 Payload: 1,000kg 220kg/m2 Maximaile sheet metal dimensions: 3048 x 1524 mm Maximum sheet thickness: 25mm SMART Control 4.0 Can be combined with a sheet metal storage system (the sheet metal storage is not part of the sale) Former new price: 250.000.-€ (net) Manufacturer's text: Equipped with two automation units - one loading and one unloading unit - the LaserFLEX enables decoupling of the feeding of a laser cutting system. After the cutting process, a fork unit lifts the machined metal plate from the changing table. At the same time, a new sheet from the connected warehouse is transported by a vacuum unit. As soon as the plate is placed next to the l ...
These systems are mainly used for processing sausage meat using stuffing machines. But other high-viscosity products from the food industry, such as marzipan, can also be tested with these devices for very fine metallic residues. The high-strength product tubes can withstand pressures of up to 55 bar. RD80/HP screw fittings are used for connection. The whole unit is height adjustable and movable, so it can be connected to all standard chargers. Optionally, the units are available with a connecting gear for direct connection to the calibrator. Suitable ejector valves are available for emptying the metal! Special features Compatible with all standard filling devices Optional ejector and/or connecting gear Protection class IP69K for all components All components in hygienic design Height adjustable via maintenance-free spindle drive M-Pulse2 controller 4 quadra ...
Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear
Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.
Goring Kerr DSP2 Metal detector Stainless frame, belt dimension 2400mm x 200mm, aperture 300mm x 100mm, pneumatic blow reject into reject bin, 3Ph
Goring Kerr Metal detector Model: DSP2 Serial: 56692 Stainless frame, variable speed, belt dimension 1950mm x 260mm, aperture 350mm x 130mm, pneumatic push arm reject into reject bin, 3Ph
Cintex Metal detector Model: Sentry Stainless frame, belt dimensions 900mm x 150mm, aperture 220mm x 85mm, pneumatic blow reject into reject bin, with alarm, 3Ph
Mesutronic MN 5.1 PW50 metal check for bulk materials, etc. without integrated reject/ejection mechanism, reject/ejection time adjustable from 0.1 s to 10 s, inlet height (middle of the tube) approx. 755 mm, outlet height (middle oft he tube) approx. 450 mm, tube outer diameter approx. 32 mm, tube inner diameter approx. 28 mm, electrics 100-240V/50/60Hz, machine dimensions approx. 350 x 350 x 770 mm (LxWxH), machine net weight approx. 35 kg
Closed metal energy chain, S1250.171-RM-300-St-4000, Kabelschlepp, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part comes from a spare parts warehouse at a manufacturing plant, has never been used, is new and has only very minor signs of storage. Metal energy chain, energy guide, S1250.171-RM-300-St-4000, cable carrier, as good as new, Closed, heavy-duty design Includes 2 connecting parts Total length measured approx. 4300 mm, outer width 195 mm, web width 171 mm, 32 links, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for dire ...
Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...
KOLZER DGK 36SV vacuum metallizer was built in 2016 in Italy by Kolzer s.r.l. The machine on offer enables various types of components, i.e. plastics, glass, cups and automotive parts, to be coated with decorative or functional coatings. These coatings give the workpieces a characteristic metallic, mirror or gold effect. The machining process is performed in a deep vacuum. Inside a large chamber, there is a tungsten spiral into which small rods or wires of conductive metals are inserted. A high-power current is passed through the spiral, causing it to heat up to 1500°C. This temperature causes the material to melt and generate vapour. The vapour then spreads out as a cloud of atoms and is evenly deposited on cold objects (cups, foils, packaging), forming a thin metallic layer. The entire cycle takes between 4 and 6 minutes. The thermal evaporation method used in the PVD (Physical ...
Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...
CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...
Weibert MKS-315 MEAL Cutting of profiles, pipes, solid materials made of black and waistband metal. saw blade diameter, 315mm bore 32mm Blade speeds 53-105 rpm Quick-release vice 140mm opening Engine power 2.2 KW Reel pad Coolant device +-45° swivel Weight 220kg WJ-MKS-315 MEAL options: underframe Circular saw blade D = 55mm 45° 50 mm material full D = 180mm 45° 80 mm pipe Square 85x85 45° 70x70mm Flat 140x70 45° 80x70mm
VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg
sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you here a used box shelf for sale. The shelf is ideal for lighter boxes, but cardboard boxes can also be easily picked up. The box shelf can be individually adjusted to your own needs. Both the angle of inclination of the roll strips and the distance between planes can be quickly and easily adjusted with an Allen. The levels are provided with guide rails on both sides and a stop on one side, so that the boxes/cardboard boxes are secured against accidental falling. Technical data and further information: Manufacturer: Beewatec Designation: Cardboardrack 1 lanes 19032-01 Year of construction: approx. 2015 Notes: As can be seen in the pictures, the shelf is delivered in a pre-assembled state. Included in delivery are: 01x Box shelf, used Total length: approx. 2,500 mm Total depth: approx. 610 mm Total height: approx. 1,915 mm Internal depth: approx. ...
KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls
CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...
CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa, metal saw band Bitec M42 Plus unused -Dimension: 2450x27x0.90 mm 4/6 -Number: 7x sheets available -Price: per piece -Weight: 0.5 kg/piece
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa Bitec Plus metal saw band unused -Dimension: 4250x34x1.10 mm 4/6 -Number: 5x sheets available -Price: per piece -Weight: 1.3 kg/piece
Metal band saw, band saw machine, vertical band saw -Passage width: 380 mm -Passage height: 230 mm -Table: swiveling -Speeds: 12 pieces min: 45 rpm max: 800 rpm -Dimensions: 1150/715/H1900 mm -Weight: 522 kg
Metal band saw blade, band saw blade, metal saw band -Quality: unused, original packaging -Toothing: 3/4 K-POS -Price: per piece -Number: 6x sheets available -Dimensions: 3830x27x0.9 mm -Weight: 0.8 kg/piece
material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 30 mm -Load capacity: kg -Dimensions: 250/100 / H460 mm -Weight: 20 kg
maximum number of results exceeded
please refine your search
10 € 
