metal bandsaw used for sale

max. saw blade D 350 mm, Miter: 45-90° left + 45°-30° right, Speeds/ motor power 9/18/36/74 rpm. 1.5 + 1.8 kW, Automatic cutting feed infinitely adjustable, pneumatic jaw clamping Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm Square 90° 100 x 100 mm Square 45° 95 x 95 mm Square 30° 85 x 85 mm Dqyu0F Round 90° 120 mm Round 45° 120 mm Around 30° 100 mm Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat 10 x 10 mm coolant device, roller conveyor, Voltage 380V-50Hz Connection cable with 16 A CEE plug, new saw blade, Operating instructions with spare parts list and electrical circuit diagram, new engine

Product description: - new machine - 3x42 Volt - 2300W power - 460mm cutting length - 3m straightener (also for cattle)

Machine Details Stock-No. 1105-04064 Type of machine Band Saw - Automatic - Horizontal Make BEHRINGER Type SLB 240 A Year of manufacture 2016 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free loaded truck, ex stock HAGUENAU Technical details cutting diameter 260 mm saw band length 4100 x 32 x 1.1 mm cutting width 260 mm feed length 600 mm range L-W-H 2.5 x 2.2 x 1.6 m Weight of the machine approx. 2.2 t Additional information automatic band saw Chip Conveyor hydraulic pump good working condition

Fuho Type 1408 Metal Band Saw Vertical band saw Passage width 350mm Saw blade device Motor 1kW 400V 50Hz Scissors for saw blades Table can be swivelled transversely and longitudinally Saw blade guide at the top and bottom Band length 2362mm G&2996-M40GH

A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible.

Offer 22252 Specifications: - Cutting range at 90° round + square 330 mm - flat 600 x 320 mm - Mitre adjustable left / right 30 / 45 ° - Schnittb. at 45° Re + Li around 320 mm - flat 350 x 320 mm - Material support height approx. 920 mm - Saw blade dimensions 4440 x 34 x 1.1 mm - Cutting speed infinitely variable 10 to 100 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise - Coolant device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 1400 x H 1400 x D 2400 mm - Weight approx. 1000 kg

Offer 25101 Specifications: - Cutting range at 90° around 400 mm - flat W 400 x H 400 mm - Cutting area at 45° flat W 320 x H 320 mm - Cutting area at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw blade dimensions 5090 x 34 x 1.1 mm - Cutting speed infinitely variable 17 - 90 m/min - hydr. Lifting – lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant device - Roller conveyor feeder 7000 mm - Discharge – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Offer 25228 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, hydr material replenishment machine - Saw blade dimensions 4400 x 34 x 0.9 mm - Cutting speed infinitely adjustable 15 - 88 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 360 mm - Square flat 360 x 430 mm - Hydr. Material Tension - Hydr Material Replenishment Machine - Coolant device - Drive 400 V / 3 kW - Space requirement approx. W 2200 x H 1850 x D 1300 mm - Weight approx. 1100 kg - Roller conveyor 2000 mm

SPECIFICATIONS: Table: 1000 x 1000 mm Flywheels: Ø 900 mm Saw blade length: 5985 mm Saw blade width: 108 mm Electronically adjustable saw blade guide Manual saw blade adjustment Installed power: 15 kW EQUIPMENT: 1 Resawing Saw (SAM meccanica SR/026) SPECIFICATIONS: Installed power: 0.37 kW Operating pressure: 5÷7 bar Roller: Ø 200 mm Roller height: 400 mm Max. opening angle - saw blade: 200 mm Max. opening roller - saw blade: 400 mm

Offer 25282 Specifications: - Saw blade diameter 600 mm - Cutting area at 90° - 190 x 190 mm - 100 x 310 mm - mitred at 45° - 170 x 170 mm - 100 x 220 mm - Saw blade speed 2800 rpm - Drive approx. 4.5 kW - Space requirement approx. W 1470 x H 1800 x D 1550 mm - Weight approx. 450 kg - Digital degree positioning display - Pneumatic device with pneumatic clamping cylinder -Saw blade - Discharge roller conveyor with dimension stop + digital display 5000 mm

V. Bandsäge, Fabr. Elektra Beckum, Type BAS 315/4 Year of Make: 1994 Projection 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: saw blades, length stop, angle adjustment for mitre cuts

Key data: 400 mm

gebr. V. Bandsäge Fabr. Bauer (with only about 50 operating hours) incl. welding device for the saw blades Saw blade rollers diameter 400 mm Saw blade length 3000 mm Table size 520 x 470 mm Dimensions: 600 x 700 x 1800 mm Weight approx. 280 kg

Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With saw blade welder Ideal BS0/16 with band shears and whetstone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very neat condition

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Rectangle: 200 x 80 or 150 x 70 mm mitred at 45° rectangular/flat: 150 x 70 mm Portrait: 100 x 60 mm 2 cutting speeds by pole-switchable motor: 19 and 28 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Space requirement: 1200 x 1100 x 1620 mm

Automatic horizontal band saw for cutting slats mod. TS400 – CE compliant - Dual-speed device - Max cutting capacity 420x200 mm. - Belt blade distance 2-150 mm. - Minimum cutting thickness from top 0.75 mm - Diam. flywheels 800 mm. - Flywheel width 50 mm. - Blade length 5500 mm. - Mixed oil cooling system - Hydraulic tensioning system 2500 kg - Variable feed speed 0-25 m/min - 2 hp feed motor with inverter - Main motor with 30 hp inverter - Lifting motor 0.5 hp - Nr. 3 suction ports 100 mm. - IE3 motor - Offset device - Matr. 15084 - Year 2022 - COMPLETE WITH MANUAL AND CE CERTIFICATION

Band saw CENTAURO SP700 Machine according to CE standards

SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table

Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg

Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Code: 0285 Brand: CENTAURO Model: CO 800 - CE Standard Band saw for cutting wood, plastics, aluminium - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 500 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1625 x 940 x 2500 h Weight kg 630

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Type: Bandsaw Blade Flash Butt Welding Machine Brand: Temelsan Model: KN67-HB Year: 2005 Application: Welding and joining of bandsaw blades (flash butt welding process) Equipment: - Dual hydraulic clamping units - Adjustable clamp gap system - Integrated welding and annealing functions - Control panel with digital settings - Pressure gauge and hydraulic system - Foot pedal operation - Built on steel frame stand Technical Data: Voltage: AC 380 V / 50 Hz Power: 10 kW Control Voltage: 24 V DC Welding Capacity: Bandsaw blades (various sizes, see plate) Condition: Used Auction-ID: A7-45993-71

Type: Automatic Bandsaw Brand: KASTO Model: SSB 260 VA Year of manufacture: 1989 Application: Automatic metal cutting (bars, profiles, solid materials) Equipment: - Hydraulic clamping system - Automatic feed system - Roller conveyor infeed - Integrated control panel with digital display (Minipos 807) - Coolant system (integrated base tank) Technical Data: Voltage: 380 V Frequency: 50 Hz Power: approx. 6.0 kW Condition: Used Auction-ID: A7-45993-76

Make: KASTO Type: Automatic Bandsaw Model: KASTO 460 Manufacturer: KASTO Maschinenbau GmbH & Co. KG, Germany Cutting capacity (approx.): 460 mm Machine configuration: - Automatic horizontal bandsaw - Hydraulic feed system - Integrated roller conveyor (infeed/outfeed) - Clamping vise system - Coolant system (integrated) Drive: - Electric motor drive - Hydraulic unit with pump Control: - Control panel with push buttons and selectors - Emergency stop - Adjustable feed and cutting parameters Equipment: - Roller table / material support - Coolant tank and pump - Machine lighting Condition: Used Own mass: approx. 2,500 kg Dimensions (LxWxH): approx. 2,500 x 2,300 x 1,800 mm Auction-ID: A7-45993-29

saw cap. 1650x900x1250 mm; equipped with clamping device Auction-ID: A1-46386-12

The machine is in perfect condition

Guillotine Shears, Metal Shears DIGEP Type OL 3Workshop Overhauled Guillotine ShearFabr. No. 1312 Year of construction 1977Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mmCutting thickness at 450 N/mm² 3 mmSingle back gauge 500 mmStand projection 200 mmCutting angle 2 stroke rate at full cutting length max. 50 strokes/min. Working height 860 mmMotor power 2.2 kWNew connection 380 Volt, 50 Hz- LED cutting area-Lighting- Simple backgauge with manual adjustment- Mechanical

Guillotine shear LOTZE type HSS 20 / 7Cutting length 2050 mmCutting thickness 7 mmwith single back gauge; used

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

35 cm x 20 cm

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

Max Saegeblattdurchmesser, 315 mms of drilling 32 mms sheet speeds 53-105 revos quick instep vice 180 mms of opening engine power 2.2 kW role edition coolant equipment +-45 ° tiltable weight 220 kg special price: net 1584,-? . options: underframe net 197,-? circular-saw blade

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available

Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price â?¬13.00 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Metal detector without tape If you have any questions: 01718367957

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET