metal bandsaw used for sale

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

10′ x 3/4″ Cincinnati Mechanical Shear Material Width: 10′ Thickness: 3/4″ Serial # 6210 Model # 14611 Hardness: 300 Brinell 11 Hold-Downs Adjustable Entry Edge Guides

10′ x 3/8″ Cincinnati Mechanical Shear Material Length: 10′ Material Thickness: 3/8″ Front Guage Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 11 Electric Foot Pedal Digital Control Motor: 8HP AC

60″ x 10g Secrest Mechanical Shear Make: Secrest Machinery Material Width: 12″-60″ Maximum Thickness: .125″ Air Clutch & Brake Motor: 10HP AC

12′ x 1/4″ Cincinnati Mechanical Shear Material Length: 12′ Material Thickness: 1/4″ Model: 1812 Serial # 30782 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 15HP AC

12′ x 3/8″ Pacific Hydraulic Shear Make: Pacific Serial # 1090 Model: 375R12 Maximum Width: 12′ Material Thickness: 14g – 3/8″ Knife Length: 144” Distance Between Housing: 12.5’ Electric Back Gage

Metal separators for the investigation of powdery and fine-grained bulk materials Compliant with current hygiene regulations good condition

12″ x .250″ Cincinnati Mechanical Shear Material Length:12′ Material Thickness: 1/4″ Model: 1812 / Serial # 33664 Gap: 4″ Speed: 60 spm Auto Lube Number of Hold-Downs: 12 Electric Foot Pedal Digital Control Motor: 12HPAC

Corner notching machine make BOSCHERT type K 30 - 120 MINI S DIG.Machine -No: 398, year of construction 1993Cutting performance at St 40: 4.0 mmCutting performance at VA: 3.0 mmCutting length: 150 x 150 mmAngle adjustment: 30 - 120 °Table height: 900 mmConnected load: 4.5 kVADimensions L x W x H: 1250 x 800 x 1160 mmWeight approx: 850 kgWith- Adjustable digital display for both notching sidesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneum. Corner notching machine make EDEL type EP 950Fabr. -No: 24958377, year of construction 1983Cutting length: 200 x 200 mmCutting angle: 90 °Max. Sheet thickness: 4 mmAir consumption per stroke: 70 lWeight: 330 kgExternal dimensions: 800 x 700 x 1500 mmWith- Lutwartungseinheitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SKOMAB hydraulic notching machineTechnical specifications:Table size: 760 x 600 mmExternal dimensions L x W x H: 1000 x 700 x 1300 mmWeight approx: 400 kgWith- several notching toolsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Poppet turning lathe make HUNGER type VDKYear of construction 1982Center height: 60 mmSupport adjustable: 29-30 and 44-45 °Bed width: 85 mmCone diameter: 20 - 60 mmShank diameter: 6 - 15 mmPower connection: 380 V / 50 HzWeight approx.: 15 kgOutside dimensions approx: 340 x 120 x 220 mmvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table Universal Nachdrehmaschine Make SEE type RAPIDCenter height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzWeight approx: 100 kgDimensions approx: 850 x 400 x 350 mmWith- without base- Three-jaw chuck 125 mm- 4-fold steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brake drum lathe make PMD type IRIA 2Year of construction 1981 for the processing of truck brake drumsTechnical specifications:External dimensions approx.: 1400 x 800 x 1500 mmWith- 5 automatic feeds 0.05 - 0.25 mm / min.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal small lathe manufactured by UNGARN, type EMU - 250Fabr. -No: 3104, year of construction 1973Technical specifications:Center distance: 600 mmTop height: 130 mmTurning diameter over bed: 260 mmSpindle bore: 28 mmStepless speeds: 52 - 2250 rpm.Drive power: 1.62 kWExternal dimensions: 1785 x 600 x 1200 mmWeight: 770 kgWith- Three-jaw chuck 140 mm- Quadruple steel holder- tailstock- Drill chuckusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Drilling and parting lathe make WEIPERT type WPBA 710Machine -No: 16717 built in 1961Technical specifications:Distance between centers: 2500 mmCenter height over flat track: 710 mmTurning diameter over bed: 730 mmBed width: 580 mmSpindle bore: 230 mm16 spindle speeds: 14 - 450 rpm.Drilling depth: 1200 - 5700 mmDrive power: 25 HPused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic Bending Machine Fabr. STROJARNE - PIESOK Type XONM 2000 / 2A - 2Machine -No: 237-516-1978, built in 1978Working length: 2050 mmMax. Sheet thickness: 2.0 mmbend to: 135 °Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower cheek: 100 mmStroke of bending beam: 100 mmDrive power: 2.2 kWWeight approx: 2800 kgExternal dimensions approx: 3000 x 800 x 1600 mmWith- Separate hydraulic system- adjustable bending angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

wivel bending machine make PEXTO type PX36AMachine -No: 570DTechnical specifications:Cutting length: 1040 mmCutting thickness of normal steel: 1.6 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized swivel bending machine make ALBERT STAHL type ABE 400/6Machine -No: 722144 built in 1972Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmDimensions L x W x H approx.: 4000 x 1800 x 1500 mmWeight approx: 5 tWith- additional rail- 5-way foot control- manual backgaugein good, used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic folding machine make STROJARNE - PIESOK type XONM 2000/2Technical specifications:Working length: 2050mmMax. sheet thickness: 2.0 mmbend up to:135°Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower beam: 100 mmStroke of the bending beam: 100 mmDrive power: 2.2 kWWeight approx.: 2800 kgExternal dimensions approx.: 3000 x 800 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual folding machine make FASTI type 206/5-20-2.0Machine -No: 7126061, built in 1971with additional motorized upper beam adjustmentTechnical specifications:max. working length: 2040 mmMax. sheet thickness: 2.0 mmStroke of the upper beam: 200 mmAdjustability of the lower and bending beam: 80 mmWeight approx.: 1830 kgWith- counterweight- motorized upper beam adjustment (without function)- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual folding machine made by BERNACKTechnical specifications:Max. Working length: 1000 mmMax. Sheet thickness: 2.0 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Construction folding machine make CIDAN type BA 200Masch. -No: 18127/02 built in 1999especially suitable for use on construction sitesin all-welded steel constructionTechnical specifications:Working length: 2050 mmMax. Sheet thickness 160 N / mm2 Titanium zinc DIN 17770: 0.8 mmStroke of the upper beam: 75 mmBending beam thickness: 15 mmOutside dimensions approx: 2350 x 275 x 1100 mmWeight approx: 160 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swing cut - sheet metal shears make DIGEP type DLB 16/3100Machine -No: 71, built in 1986Technical specifications:Knife length: 3100 mmCutting length: 3000 mmMax. Sheet thickness: 16 mmNumber of strokes single operation / series operation: 8/12 H / min.Power requirement: 39 kWWeight approx: 25.5 tDimensions approx: 5160 x 3000 x 2700 mmWith- 4 table extensions- motorized backgaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make VOEST-ALPINE type BTHS 8 x 3150Fabr. -No: MBO-565Technical specifications:max.cutting length: 3150 mmmax.sheet thickness: 8.0 mmThroat: 300 mmInfinitely variable cutting length adjustment: 500 - 3150 mmStop adjustment range: 0 - 1000 mmWeight about 10.2 tDimensions approx: 3500 x 2300 x 1900 mmwith- motorized backgaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make SAGITA BEYELER type 3100 x 12Ser. -No: 27994 built in 1975Technical specifications:Cutting length: 3100 mmmax.sheet thickness: 12 mmDistance between the uprights: 3250 mmCutting angle: 2.0 °Number of cuts per minute: 24 - 34Dimensions approx: 3650 x 2050 x 2050 mmDrive power: 40 hpWeight approx: 13 twith- Cutting gap adjustment- Adjustment range of the stop 1100 mm- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic guillotine shears make LUTHER type TS-S 25/4Year of construction 1973Technical specifications:Max. cutting length: 2530 mmMax. cutting thickness at 50 kg strength: 4.0 mmlateral projection: 200 mmTable height: 750 mmStrokes per minute:45Drive power: 15 kWDimensions L x W x H: 3010 x 2150 x 1800 mmWeight approx.: 6100 kgwith- Motorized backgauge- foot switch- angle stopusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual sheet metal shears make PEXTO type 137 / LMachine -No: 10/70Technical specifications:Cutting length: 1020 mmCutting thickness normal steel: 1.6 mmTable width: 300 mmWith- 2 extension arms 600 mm- foot disengagementused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lever guillotine shears make HUNDT - KRAMER type HBS IIISerial -No: 48001 year of manufacture 1990Technical specifications:Useful length: 1020 mmMax. sheet thickness: 1.25 mmWidth stop adjustable: 0 - 550 mmExternal dimensions: 1800 x 950 x 850 mmWeight approx.: 250 kgwith- open sheet metal holding for longer cuts in the push-through procedureused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal shear make LOTZE Year of construction approx. 1960 Working length: 1500 mm Sheet thickness (steel): 8 mm Motor power approx .: 17 kW External dimensions approx. L x W x H approx .: 2500 x 1900 x 1600 mm Weight approx .: 5 t With: - 2 front support arms - Angle stop - Foot release - Finger guard used, in very well maintained and functional condition Price on request. Delivery: ex warehouse or location free loading truck. Payment: net at takeover or by appointment. Technical data are not binding. Errors excepted. We would be pleased, if you like our offer and are always available for your queries. Best regards M. Waldeck WAHO Machine Tools

Crank sheet metal scissors make LOTZE type probably KShy 25Max. Cutting length: 2500 mmMax. Sheet thickness approx: 5.0 mmlateral projection: 70 mmTable width: 500 mmDimensions L x W x H: 3100 x 1600 x 1300 mmWeight: 4000 kgWith- Table extensionthe front cover plates are missingused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz

sheet width: 3000 mm plate thickness: 12 mm pre-bending: 10 mn number of rolls: 4 Walzen diameter of upper rolls: 320 mm roll diam. bottom roll: 250 mm speed: 1,5 - 5 m/min total power requirement: 20,0 kW weight of the machine ca.: 13,05 t dimensions of the machine ca.: 5,9 x 2,05 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm engine output: 2,2 kW bending speed: 5,3 m/min weight: 1360 kg range L-W-H: 2.320 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REF-2301 SAFELINE PIPELINE METAL DETECTOR Metal detector manufactured by Safeline for the inspection of liquids. Pipeline diameter: 90mm. Overall dimensions: width 400mm, length 1,000mm, height 1,500mm.

Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.

Salvagnini P4 Year of manuf. 2007 Configuration: HPT201516 MZR Machine consists of: 1. Automatic plates feeder 2. Automatic bending unit 3. Automatic bend products receiver Max sheet thickness: mild steel 410 N/mm2: min. 0,5mm - max 2mm stainless steel 600 N/m2: min. 0,5mm - max 1,25mm aluminium 265 N/mm2: min. 0,5mm - max. 3mm Min and maximum dimensions of sheet material: L min./max.: 405 / 2000 mm W min./max.: 190 / 1524 mm max diameter 2150 mm centring dim. 2000mm Machine including bending tools

MACHINE IS GREAT WORKING CONDITION . INCLUDING TOOLINGS WEIGHT: 4300 KG YEAR: 1991

350 x 200mm aperture. 300m conveyor width. 1.8m long. Push reject system. Right to left production. Full supermarket spec. 880 Line height with adjustable feet.

550 x 160mm aperture. 400mm conveyor width. 3250mm machine length. 900mm line height with adjustable feet. New belt fitted on the machine. Right to left production. Full supermarket spec.

350 x 120mm aperture. 300mm conveyor width. 900mm line height. Left to right production. Stop on detect, but can also install a reject system to bring to M&S spec. 1170mm total machine height.

450 x 160mm aperture. 300mm conveyor width. 1800mm machine length. 870mm line height. Left to right production.

350 x 115mm aperture. 300mm conveyor width. 1.3m machine length. Air reject system. 1.3m machine length. Adjustable line height with wheels.

370 x 160mm. 310mm width conveyor. 760mm line height with adjustable legs. 1200mm long. Left to right production. Ferrous in foil.