129,270 used machines on RESALE, but how to find them? Machine Search
MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg
MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased
MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.
MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds
MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.
ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor
Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T
Loma IQ Twin head metal detector Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject, 3Ph
Cintex Sentry Metal detector Stainless, belt dimensions 1400mm x 290mm, aperture 400mm x 220mm, intralox belt, mobile, 3Ph
1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...
Ref.Nr. 00791 Name of the system Blechturm Flat goods storage Manufacturer: Heitling GmbH & Co. Profil systems today Model HEI – TECHMAT - II Built in 1999 Payload/tray 34 kN Number of compartments 59 Storage capacity 2006 kN Sheet format 2000x4000mm Stacking height 55/70 Width: approx. 7,500 mm Depth: 5,000 mm tower + 5,500 mm with extended cassette Height: approx. 7,500 mm Deadline by arrangement - immediately Condition To be viewed under power Currently used next to a laser cutting system
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Sheet metal centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 flange diameter: Ø 56 / 72 mm Sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m Connection cable New ! Dimensions: 210 x 80 x 90 mm
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, easily machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm
Sheet metal gripper, curve clamp gripper DE-STA-CO 84A32-20100 Max 8 bar New ! Dimensions: 180 x 75 x 65 mm
Sheet metal gripper, curve clamp gripper DE-STA-CO 84A32-20300 Max 8 bar New ! Dimensions: 180 x 75 x 75 mm
Metal bellows coupling ALMA ATMK 60-603036-25-30 shaft diameter: Ø 25 / 30 mm New ! Dimensions: Ø 70 x 80 mm
Pipe measurement 33 cm, length 3.90 m + Steel beam L 5.25 m.H 25 cm. W 12 cm.
machine ready for transport and to be assessed on viewing day
Horizontal metal band sawing machine, often used for cutting metal profiles and pipes to size. Serial number: 2010 Date: Speed: 20 - 29 - 51 m/min Max. cutting capacity 90°: 128 mm Saw blade specifications: 1640 x 13 x 0.6 mm Voltage: 1/N/PE AC 230 V 50 Hz Power: 550 W Degree of protection: IP 54 Weight: 95 kg
Metal bellows coupling R+W BKC/150/24PFN/40/XX shaft diameter: Ø 24 / 40 mm New ! Dimensions: 82 x 82 x 80 mm
Sheet metal gripper, sheet metal clamp TAKRAF K4MP 4000 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 460 x 200 x 90 mm Weight: 14.5 kg
Including: 5x metal case, 540x800x2130mm, with 20 metal bins. The contents of these containers (mounting material) are included in the lot. The photos of the contents of the bins are for illustrative purposes. 1 metal container is not present.
Equipped with 2 conveyor belts with dimensions: 1 x 305 x 60 x 95 cm and 1 x 175 x 60 x 95 cm
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg
maximum number of results exceeded
please refine your search
10 € 
