met tech used for sale

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic distribution system, pressure/temperature monitoring, heating system, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-20

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, vacuum/pressure system, upper pressure vessel, safety guarding and separate operator control console Working table: Approx. 2,500 × 1,600 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-17

working width: 630 mm workpiece width - max.: 1,0 - 100 mm sandingbelt width: 650 mm sandingbelt length: 1900 mm dimensions: 1320 x 2250 x 2200 mm weight of the machine ca.: 2500 kg Description: - Universal, compact entry-level machine for machining steel, stainless steel, and aluminum - The continuously adjustable sanding belt speed allows you to reliably remove cutting burrs and achieve a smooth surface finish - With our flap-disc unit, you can achieve uniform edge rounding on all sides and a non-directional finish - The speed-controlled rounding unit enables different rounding depths and optimal processing for every application - 150 mm wide magnetic track The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; roof pitch 25 degrees; 3 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-25

free span of canopy construction; trusses c.o.h. 5000mm; front height 4450mm, rear height 3650mm; 4 sets of intermediate trusses HEA140; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-12

Heavy flat roof steel construction; free span; trusses c.o.h. 5000mm; consisting of 4 sets of intermediate trusses heavy lattice girders with HEA140 as uprights; 2 sets of end trusses with wind posts in IPE140 with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41460-15

Dutch production; barn model with a free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 3 sets of intermediate trusses IPE 270/240; 2 sets of end trusses IPE 200/180 with wind posts; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-7

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 6 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-23

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 3 sets of intermediate trusses IPE 240; 2 sets of IPE 180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-8

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 11 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-19

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE360/300; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-2

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 5 sets of intermediate trusses IPE 270/240; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-5

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 5 sets of intermediate trusses; including steel purlins for the roof and facades; equipped with tie rods with suspension strips; bracing and cross braces; nuts and bolts; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-24

AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-019 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, pressure vessel, pneumatic/vacuum system, heated upper pressing section, operator control panel, emergency stops and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-29

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002M Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Hydraulic pressure: Up to 500 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic valve system, heated upper press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,920 kg All descriptions are indicative only. Auction-ID: A1-50546-23

\"Roller circumference measuring devices PAV power supply Tesa module measuring range 500 - 1,100 mm, digital display, craneable\" Auction-ID: A1-50608-71

Technical details Type: Horizontal metal band saw Configuration: - Hydraulic saw bow - Continuous metal-cutting band saw blade - Hydraulic feed cylinder - Dual hydraulic workpiece clamping system - Adjustable material feed carriage - Feed screw adjustment - Coolant lubrication system with flexible nozzle - Coolant collection tray - Separate electrical control pedestal - Heavy-duty cast-iron frame Application: - Cutting steel bars - Cutting tubes and pipes - Cutting structural profiles - Cutting solid stock - General metal fabrication Construction: - Hydraulic gravity-feed operation - Automatic cutting cycle - Integrated hydraulic power unit Dimensions: - Length: Approx. 2400 mm - Width: Approx. 1600 mm - Height: Approx. 1700 mm Weight: Approx. 1400 kg Condition: Used Observed condition: - Machine appears structurally complete - Saw head and hydraulic cylin ...

Technical details Type: Mechanical guillotine shear Capacity: Sheet steel up to 2 mm Configuration: - Belt-driven flywheel - Electric motor drive - Mechanical clutch system - Front work support table - Hold-down beam - Blade guard - Push-button control station Application: - Straight cutting of sheet metal - Steel fabrication - Workshop production - General sheet metal processing Construction: - Heavy-duty welded steel frame - Mechanical guillotine drive Dimensions: - Length: Approx. 2600 mm - Width: Approx. 1800 mm - Height: Approx. 1800 mm Weight: Approx. 3200 kg Condition: Used Observed condition: - Frame appears structurally sound - Flywheel and electric motor installed - Front support table and blade guard present - Push-button controls installed - Heavy dust accumulation and surface oxidation visible - Long-term storage indications present - Blade c ...

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 8 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-21

free span; roof slope 15 degrees; trusses 5.00 meters; 6 sets of intermediate trusses IPE220 uprights and IPE200 trusses; 2 sets of IPE180 end façade trusses with wind posts; 3D drawing; steel drawing; provided with purlin lips on the rafters and in the uprights; pressure tubes; wind bracing; lot is neatly ready for transport and can be loaded on 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-13

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 9 sets of intermediate trusses IPE330/270; 2 sets of end trusses IPE 220/200/180 with wind posts, 1 set of which is equipped with a UNP220 door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-3

free span; roof pitch 26 degrees; trusses 5.00 meters; 4 sets of intermediate trusses IPE200; 2 sets of end trusses IPE140; provided with purlin lips on the rafters; pressure tubes; wind bracing; lot is neatly ready for transport and can be loaded on 1 trailer; Lot is loaded for free with a forklift Auction-ID: A1-41460-14

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2104-014 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic control system, vacuum system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,385 kg All descriptions are indicative only. Auction-ID: A1-50546-26

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-016 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-24

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 4 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41460-30

Dutch production; free span; trusses c.o.h. 5100mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE 300; 2 sets of IPE 200/180 end frames with wind posts, 1 set of which is equipped with a UNP180 door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-4

free span; trusses c.o.h. 5000mm; roof slope 20 degrees; 10 sets of intermediate trusses IPE240; 2 sets of IPE200 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips between the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-10

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41460-29

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 5 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-28

Technical details Manufacturer: FSO \"ZMM\" Popovo Model: ML 2000 Type: Mechanical sheet metal guillotine shear Year: 1977 Capacity: Sheet steel up to 1 mm Configuration: - Belt-driven electric motor - Mechanical flywheel drive - Upper moving blade - Fixed lower blade - Spring hold-down system - Front work support table - Push-button electrical controls Application: - Straight cutting of sheet metal - Steel fabrication - HVAC sheet metal work - General metalworking Construction: - Heavy-duty welded steel frame - Mechanical guillotine drive Working length: Approx. 2000 mm Dimensions: - Length: Approx. 1700 mm - Width: Approx. 900 mm - Height: Approx. 1300 mm Weight: 630 kg Condition: Used Observed condition: - Machine appears complete - Electric drive and belts installed - Blade assembly present - Push-button controls installed - Heavy dust accumulation  ...

free span; trusses c.o.h. 5000mm; roof slope 15 degrees; 3 sets of intermediate trusses IPE180; 2 sets of end trusses with wind posts IPE140; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-17

Used and unchecked; viewing desired Auction-ID: A1-50737-63

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 8 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-26

Dutch production; barn model with a free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 5 sets of intermediate trusses IPE 270/240; 2 sets of end trusses IPE 200/180 with wind posts; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-6

Flat roof construction; steel construction with completely free span; trusses c.o.h. 5000mm; consists of 4 sets of intermediate trusses lattice girders with tubes as uprights; 2 sets of end façade trusses in IPE160 with wind posts; steel drawing; 3D impression; equipped with pressure tubes; wind bracing; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-16

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane and foil onto panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum pump/system, pressure vessel, pneumatic controls, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-25

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 7 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41460-31

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 7 sets of intermediate rafters; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-22

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 9 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-20

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating decorative films and similar materials onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Industrial sliding worktable, hydraulic/vacuum system, pressure vessel, heated upper pressing section, operator control panel with HMI, emergency stops and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-30

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2101-01 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, hydraulic power unit, pneumatic/vacuum controls, pressure vessel, heated upper pressing section, operator control panel and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-28

Used and unchecked; viewing desired Auction-ID: A1-50737-68

free span; trusses 5.00 meters; roof slope 15 degrees; consists of 7 sets of intermediate trusses with IPE240 uprights and trusses; 2 sets of end frames with wind posts in IPE160; including steel drawing; 3D drawing; 28 pieces of pressure tubes; 2 sections of wind bracing; 2 compartments of cross braces; purlin lips between the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-11

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 6 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-27

Technical details Type: Precision measuring equipment lot Configuration: - External micrometers - Large outside micrometers - Precision setting standards - Gauge bars - Dial indicators - Machine alignment tools - Circular setting gauges - Precision inspection accessories - Original fitted wooden storage cases Application: - Dimensional inspection - Machine setup and alignment - Toolroom measurements - Quality control - Industrial metrology Construction: - Precision-ground measuring instruments - Hardened steel measuring surfaces - Wooden fitted storage cases Estimated quantity: - Approx. 25–40 fitted wooden cases Condition: Used Observed condition: - Original storage cases included - Instruments appear well protected - No significant corrosion visible - Complete measuring sets appear present - Dust accumulation from long-term storage - Calibration status ...

Vacuum Membrane Press AS Metal Transform Manufacturer: AS Metal Ağaç Makinaları San. Tic. Ltd. Şti. Model: Transform Machine code: MBPR06 Year: 2018 Serial number: 1801-002 Industrial vacuum membrane press for forming and laminating workpieces. Heavy-duty machine with enclosed pressing chamber, pressure/vacuum vessel, sliding loading table, safety guarding and separate operator control panel. The sliding worktable/platen is approximately 2,500 mm long. Power: 45 kW Electrical supply: 380 V, 3-phase, 50 Hz Required compressed air pressure: 6–7 bar Hydraulic system: Oil-operated Hot-oil system: Transfer oil Approx. dimensions (L × W × H): 4,500 × 3,000 × 2,800 mm Weight: 6,370 kg Condition: Used. All descriptions, technical specifications, dimensions and other information are indicative only. Auction-ID: A1-50546-21

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for thermoforming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2102-004 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic controls, vacuum system, heated pressing section, operator control panel and perimeter safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-27

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 11 sets of intermediate trusses IPE360/300; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 2 trailers; Lot is loaded with a forklift for free Auction-ID: A1-41460-1

free span; trusses c.o.h. 4000mm; roof slope 15 degrees; 2 sets of intermediate trusses IPE160; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-18

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated upper press section, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,370 kg All descriptions are indicative only. Auction-ID: A1-50546-22