133,386 used machines on RESALE, but how to find them? Machine Search
TecHouse/Multigraf shed delivery tape 482.112; good condition; cleaned and tested; Length 1100mm; Width 340mm; sensor for automatic control; Speed adjustable; height adjustable. TecHouse/Multigraf stream delivery 482.112; good condition; cleaned and checked; Lenght 1100mm; width 340mm; sheet detection sensor for stop and go mode; adjustable in speed; adjustable in hight.
used
offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg
Matrix Sri Carbonator/Nitrogenator Semi Automatic Carbonator/Nitrogenator Skid mounted unit complete with stainless steel control panel, mass flowmeter for gas and inverter controlled pump. Includes serpentine mixing pipe and stabilization column for finished product. Manufacturer. Matrix Sri Model: PROCAR AS3 Output 1500 to 3000 litres per hour Incoming Beer Temperature 4 Degrees C Incoming Beer Pressure required is 1.5 to 2.5Bar Minimum Carbonation value 3grammes per litre Maximum Carbonation value 6 grammes per litre Nitrogen is not Dissolved Air pressure – Minimum 6Bar Electrics 415v/50Hz/3Phase This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of Make: 2013 Condition: Used Drive Type: Flat Belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveyor width: approx. 600 mm Castors/ center distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) Stock: 2 pieces Price per meter Internal Article Number: 2026020501 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to make ...
Mint only 300 operating hours. Can be viewed on site. Dip-Tech GP Series – Industrial Digital Printing Machine for Glass (Ceramic Printing) Bjbsypllcjn Efavpscw High-end digital printing system for architectural, automotive and specialty glass The Dip-Tech GP Series is an industrial digital printing press for ceramic direct printing on glass. Developed for heavy-duty production, it combines the highest print quality (720 DPI), high speed (up to 33 m²/h) and maximum flexibility for glass formats up to 2400 x 6000 mm (depending on model). Thanks to the patented Drop-Fix system (air convection technology), the ink is optimally fixed – for finer details, sharper lines, reduced colour gradients and excellent colour brilliance. Technical highlights: ✔ 12 printheads / 720 DPI ✔ Up to 33 m²/h production capacity ✔ Glass thicknesses: 2–19 mm ✔ Glass sizes: 80 ...
Belt conveyor/webbing/conveyor belt 9.77 meters Manufacturer: AMI Year of Make: 2016 Condition: used Total length: approx. 9770 mm Total width incl. motor: approx. 770 mm Total width without motor: approx. 690 mm Conveyor width: approx. 600 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: 300 mm/80 mm Incl. SEW motor 0.55 kW/r/min. 1360/87 Harness must be fitted on site Internal Article Number: 2026031801 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics ...
Key data: 199 , 6 , 40
FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...
Belt Conveyor/Conveyor Belt/Webbing Manufacturer: Schunk Fördertechnik GmbH Condition: used Model/Type: Strap Total length: approx. 5110 mm Total width including motor: approx. 600 mm Total width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Belt Type: Fabric Tape Material: Steel/Aluminum Frame height: 100 mm Engine included: 0.25 KW Including 3 feet height adjustable Internal Article Number: 2026032303 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent ...
2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection
SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...
working area: . mm material: . capacity: . Stück/h weight: 250 kg Machine number: 05.0501.01Nominal vacuum 0.5 h PAThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import
Transformatoren Technik Jahnsmüller TU6/90M Pri:115/230V 82/41A Sec:230V 39.1A Weight: 49.5kg
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manufacturer: MTF-Technik Year of construction: 2011 Model/ Type: GL-HM140 Condition: Used T20 cleats - approx. 700mm pitch total length: approx. 4600 mm Total width incl. motor: approx. 860 mm Total width without motor: approx. 650 mm Belt width: approx. 625 mm Strap Type: Smooth with studs Material: Steel/ Aluminum Frame height: approx. 110 mm Includes feet on wheels (height adjustable) Includes engine Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to ...
A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.
Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece
Vibratory sieve Power : 22 kW Voltage : 400V /230V 50Hz rpm : 920 Capacity : Unknown
1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m
Mooney Viscometer Make: Alpha Technologies Model MV 2000 Rotational Speed 0.1 to 10 rpm, temperature Range ambient to 200C, torque Range 0.01 to 200 MU, rotors large: 38.10 mm D, small: 30.48 mm D.
Strapping machine, packaging machine -Semi-automatic: Pallet strapping -on: built-in transport frame -Voltage: 230 V -Dimensions: 650/800/H1250 mm -Weight: 102 kg
current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...
Electric motor, three-phase motor -Power: 0.37 KW -Speed: 2725 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 235/133/H180 mm -Weight: 7 kg
Offer up to 2 UTX Techlon 200 round slings (polyester) here. WLL: 20000kg EWL: 5m Unfortunately, they have been dragged over the hall floor a few times and are now quite dark, but they are technically very well preserved, have no cracks or cuts and the blue shield is completely present. Last test 01/2021, no more use after 07/2021
MTF Technik type GL-HM 010 mobile conveyor, conveyor length approx. 4600 mm, conveyor width approx. 175 mm, working height adjustable from approx. 750 up to 1050 mm conveyor speed adjustable from approx. 9 up to 25 m/min., electrics 230V/50Hz.
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Output: 3x 230 V -Output frequency: 0-120 Hz -Number: 1x converter available -Price: per piece -Dimensions: 205/250/H190 mm -Weight: 6 kg/piece
Used Rheinhardt Technik Conti Flow Vario 2K for bonding and sealing dosing system !
cutting diameter: 560 mm saw band length: 7.260x54x1,6 mm Control: mit 99 Programmen work height max.: 650 mm Chip coveyor: inkl. power capacity - table: 10 HP sawing motor: 650 kW weight of the machine ca.: 4.800 kg dimensions of the machine ca.: 3.400x2.050x2.380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - rubber roller - 18.5 kw - 90 sh - diam. 250 mm - rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - rubber roller - 11.1 kw - 40 sh - diam. 330 mm - n. 3 indipendent motors - working width 1100 mm - device for short pieces - year 2005
Capacity up to 6 tons For more details contact with us
System for pressure increase or constant pressure maintenance, e.g. for the fresh water inlet of bottle washers 1.5 m³ stainless steel tank with frequency-controlled pump (see pictures for performance) Level control
Radio system, antenna contact component, wireless RF modem, pico cell antenna -Manufacturer: CP Technologies, Pico Cell Antenna 2.4 GHz Ovp -Type: WAN-2185 -Number: 2 antennas available -Price: per piece -Cardboard dimensions: 280/240/H85 mm -Weight: 0.7 kg
FOOD-TECH/ E044/ 2016 Blanching machine for carrots etc. 20 tons/h used, sold as it is, where it is, price ex location used, sold as it is, where it is, price ex location
Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station -Manufacturer: workshop technology, mobile oil dispenser with hand pump -Tank capacity: approx. l -Pump: hand operated -Hose: lockable with tap -Dimensions: 430/400/H770 mm -Weight: 15 kg
Key data: 700 kN, 35 mm
used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English ...
Key data: 3000 mm, 900 mm, 200 mm
SPECIFICATIONS: Workspace: X: 3000 mm Y: 900 mm Z: 200 mm Main motor: 9.9 kW 18000 rpm CNC control No tool changer 1 vacuum pump 3 kW 120 m³ 6 positionable bars
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Control Techniques, Brushless AC Servo Drive -Type: MAXAX 100/6000 -Input: 1.5 kVA -Output: 1 kW -Dimension: 315/230/H60 mm -Weight: 2.9 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Manufacturer: Artykuly Techniczne, adapter sleeve: Morse taper sleeve MK6/5 -Type: PTPk-6/5 -Dimensions: Ø 64/130 mm -Weight: 1.5 kg
Direct from meat-free facility. Perfect for making texturised meat-like products as well as petfoods, pizza toppings, ready meal ingredients etc.
MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m -Transport dimensions: 600/460/H80 mm -Weight: 3.9 kg
MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.30m -Transport dimensions: 600/420/H90 mm -Weight: 3.8 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: MK6/5 -Dimensions: Ø 64/120 mm -Weight: 1.5 kg
MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.
CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg
– High-precision dosing, measuring and control technology – Needs-based, field-tested equipment options – High reliability – Stable dampening solution parameters Very little use Absolutely as good as new
TECHNE MCS-102L 2-Position Magnetic Laboratory Shaker New equipment in its original packaging Reference : MCS-102L This magnetic stirrer is designed for optimal suspension cell culture and the use of micro-carriers. The MCS-102L accommodates 2 x 1 liter culture flasks Speed range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel stirrer platform with culture flask markings Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotary Display: Analog Applications: of biological samples Rotational speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)
maximum number of results exceeded
please refine your search
